• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.239-241
• /
• 2001

Recently the power supply equipments have tendency to take multiple feedback loop paths. In this paper, the state space averaging technique is applied for the analysis of flyback type current mode control circuit. We made real converter for the gurantee of stable output characteristic and proper design of feedback circuit. The validity of proposed method is verified from test results. The improvement of stability is confirmed by sinusoidal signal injection method with isolated transformer. It is known that phase margin is sufficient and gain crossover frequency $f_c$, is nearly 1/5 of switching frequency $f_s$, from the experimental result with frequency response analyzer.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.669-672
• /
• 2001

Generally, previous converter is divided into two categories to get high power factor and good output regulation. These two categories can be combined a category with a main switch. These converter is called Single Stage PFC Converter. This approach has good electrical characteristics of high power factor and fast output voltage regulation. The cost and size are important factor to design the converter in low power system. Even single stage can reduce the size and cost, but this approach needs to have additional circuit like control, PWM circuit. To improve these demerits, Top switch is one of good choice In reduce and size in low power single stage converter. Because it has the ability of current limit, thermal protection, oscillator, control circuit as well as a main switch ability.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.78-85
• /
• 2015

This paper presents a new structure of single-stage flyback power factor correction (PFC) converter with a controllable coupled negative magnetic feedback (NMF) winding. NMF winding is used to reduce the bulk capacitor voltage at high line voltages and light loads. However, it would cause line current distortion at zero crossing condition. In the proposed circuit, a series winding is used with NMF inductor to eliminate the NMF inductor at low line voltages. As a result, the dead angle of the input current, near zero voltage crossing, is eliminated and the power factor is increased. The presented experimental results of the proposed PFC converter confirm the integrity of the new idea and the theoretical analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.30-31
• /
• 2017

본 논문은 인터리브드 준공진 플라이백 컨버터에 추가회로 없이 적용된 최적의 밸리 스위칭 기법을 제안한다. 인터리브드 준공진 플라이백 컨버터는 스위치 양단 전압(Drain-Source voltage)$V_{DS}$이 최소화 되는 지점에서 스위치 턴 온이 되어 전체 시스템의 효율이 향상되고, EMI (Electro Magnetic Interference)와 EMC (Electro Magnetic Compatibility)의 영향을 최소화시킬 수 있다. 제안한 기법은 MCU (Micro Controller Unit) 기반 소용량 컨버터에 간단한 수식을 이용하여 최적의 밸리 스위칭 기법을 가능하게 한다. 제안한 기법은 시스템의 가격과 부피 상승 없이 효율을 향상시키고, EMI와 EMC의 영향을 최소화시킨다. 제안하는 기법의 성능은 시뮬레이션을 통해 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.241-243
• /
• 2007

Two-stage charge equalization scheme for HEV lithium-ion battery string is proposed with the optimal power rating design rule in this paper, where in the first stage the over charged energy of higher voltage cells is drawn out to the single common output capacitor and then, that discharged energy is recovered into the overall battery stack in the second stage. To achieve charge equalization of sort, the conventional flyback DC/DC converters of low power and minimized size are employed. The industrial sample employing both the proposed two-stage cell balancing scheme and the optimal power rating design rule shows good cell balancing performance with reduced size as well as low voltage stresses of the electronic devices.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.283-285
• /
• 2007

이동 PC 및 기타 여러 가지 전자기기의 휴대화가 급속도로 증가함에 따라 저가형 Adapter의 소형화와 고효율화가 지속적으로 요구되고 있다. 이를 위해 본 논문에서는 기존의 다양한 토폴로지 중 구성소자의 개수가 적고, 스위칭 손실을 저감할 수 있는 준-공진형 플라이백 컨버터에 대한 최적 설계 방법을 제시하고 이론적 및 실험적 검증을 통해 Slim type 65W급의 고효율 Adapter를 구현한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.460-463
• /
• 1993

In this paper, The laser transmitter module is designed as the subsystem of the high repetitive laser rangefinder. The module consists of high voltage power supply, high voltage control circuits, high voltage discharger, electro-optic Q-switch driver, and laser resonator. The high voltage power supply is composed of 2-phase flyback converter. And it has 220W power level and 78% conversion efficiency. From the Q-switch driver of the crossed porro resonator, the phase retardation voltage is switched from 600V to -1500V with 200ns falling time. The module can be operated up to 15Hz. And it generates the laser pulse which has 20ns width and 80mJ.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.365-367
• /
• 2000

Recently, the power supply equipments have tendency to take multiple feedback loop paths. In this paper, the state space averaging technique is applied for the analysis of flyback type current mode control circuit. We made real converter for the gurantee of stable output characteristic and proper design of feedback circuit. The validity of proposed method is verified from test results. The improvement of stability is confirmed by sinusoidal signal injection method with isolated transformer. It is known that phase margin is sufficient and gain crossover frequency $f_c$ is nearly 1/5 of switching frequency $f_s$ from the experimental result with frequency response analyzer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.170-172
• /
• 2007

본 논문은 optocoupler를 사용하여 궤환단을 절연한 오프라인 플라이백 변환기의 설계와 해석에 중점적인 목적을 두었으며, 부가적으로 궤환단을 절연하지 않은 구조를 가지는 전류모드제어 플라이백변환기와 optocoupler로 궤환단을 절연한 구조를 가지는 전류모드제어 플라이백 변환기의 상관관계를 분석하였다. 설계와 해석을 하기 위해 PSIM 시뮬레이터를 사용하여 PSIM 모델을 제시하였으며, 제시한 PSIM 모델은 110$\sim$220V 오프라인 전원을 입력하여 10V/5A의 출력을 가지는 50W 오프라인 전류모드 플라이백 변환기의 설계와 실험을 통하여 높은 정확성과 사용의 용이성을 확인하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.185-190
• /
• 2003

The most shortcoming of metalhalide lamps is what the instant restarting cannot be realized when the arc tube is in the hot condition. The discharge starting voltage of arc tube in the hot condition is much higher than in the cold condition. Therefore it takes about five minutes to restart the metalhalide lamps, that is to say, it is possible to start when the pressure and the temperature are decreased. But, if the lamp is restarted in the hot condition, we must supply the high voltage pulse with 20kV at the both sides of lamp. The proposed electronic ballast is consist of a electromagnetic interference (EMI) filter, a power factor correction (PFC) circuit, a flyback converter, a half-bridge inverter, and a high voltage igniter circuit. By this composition we can restart the lamp with the voltage 20kV, even if the lamp is in the hot condition.