• 제어로봇시스템학회논문지
• /
• 제21권12호
• /
• pp.1142-1151
• /
• 2015

In this paper, High performance torque control based on the flux mapping of 48V Wound Rotor Synchronous Motor has been studied to improve torque control. Flux map considering MTPA (Maximum Torque Per Ampere), MFPT (Minimum Flux Per Torque), Maximum efficiency point at the same torque command and flux command for each field current was produced. Current map using flux mapping of Each field current was applied to the MTPA, MFPT. Generating a current vector locus was to determine the characteristics of the operation region. Through the Matlab/Simulink simulation, difference between speed-torque map and flux map was represented. The suggested flux map was tested actual experiments on a dynamometer.

• 전력전자학회논문지
• /
• 제26권6호
• /
• pp.454-461
• /
• 2021

To control the torque of the IPMSM, a lookup table is generally used in control system because of its nonlinear characteristics. However, the method of generating the lookup table data has the disadvantage of having difficulty accurately analyzing the changing parameters, generating the current or magnetic flux map is complicated and long test time taken due to motor temperature differences at each test points. In this paper, on the basis of the electromagnetic field design of IPMSM, we devised an electromagnetic field-based magnetic flux map model that can compensate for the pre-generated magnetic flux map through a quick and simple test.

• 한국안전학회지
• /
• 제20권4호
• /
• pp.171-179
• /
• 2005

건물의 마감재료가 화재에 노출될 때 그 마감재료의 역할을 이해하는 것은 필수적이다. 실물화재실험을 통해서 재료의 성능을 평가하는 것이 가능하다. 그러나 실물화재 실험 시 소요되는 시간과 높은 비용으로 인해 실물 화재 실험이 수행되는 경우는 드물고 대신 컴퓨터 화재 시뮬레이션이 개발되어 왔다. 컴퓨터 화재 시뮬레이션에서는 초기입력 데이터로서 점화 버너의 화염으로부터의 Heat Flux Map이 요구된다. 현재까지의 연구에서는 열전대 혹은 열유속 센서와 같은 실험장치의 제한으로 인해 $10kW/m^2$간격의 Heat Flux Map이 나와있을 뿐이고 공간적으로 더 상세한 Heat Flux Map은 없는 실정이다. 화재 시뮬레이션의 성능을 증가시키기 위해서는 점화 버너로부터의 정확하고 상세한 Heat Flux Map이 필요불가결하다. 본 연구의 목적은 적외선 카메라로부터 얻어진 표면온도를 이용하여 벽에서 점화 버너 화염에 대한 Heat Flux Happing Procedure를 개발하는 것이다. 높은 수준의 공간적 해상도는 적외선 카메라로부터 제공된다. 개발된 Heat Flux Mapping Procedure를 증명하기 위해서 ISO 9705 점화버너를 이용해서 실험이 행해졌다. 실험 결과를 통해 개발된 Heat Flux Mapping방법의 열유속 해상도와 공간적 해상도가 얻어졌다. 또한 그 실험 결과가 현재 쓰여지고 있는 Heat Flux Map과 비교되었다.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.48-53
• /
• 2012

In previous study, it showed that the MAP was greatly effective polishing process for magnesium plate. But it had lower efficiency than magnetic materials such as SM45C. It was very difficult to cut non-magnetic materials using the MAP process because the process was fundamentally possible by help of a magnetic force. This study aimed to verify analytically formation of the magnetic field in a case of the non-magnetic materials especially focused on magnesium plate. So, In this study, the magnetic density flux was predicted using simulation program. As a result, the magnetic density flux was lower at the center of pole on inductor than outside. It had same result on the experimental verification. And magnetic force was lower according to increase of working gap. So, to improve the magnetic force, permanent magnet was installed under the workpiece. In that case, the magnetic density flux not only at center but also at outside of pole was increased. Therefore, the efficiency of magnetic abrasive polishing was also increased. A design of experimental method was adopted for assessment of parameters' effect on the MAP results of magnesium plate for improving the magnetic force.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.45-50
• /
• 2008

In previous study, it showed that the MAP was greatly effective polishing process for magnesium plate. But it had lower efficiency than magnetic materials such as SM45C. It was very difficult to cut non-magnetic materials using the MAP process because the process was fundamentally possible by help of a magnetic force. This study aimed to verify analytically formation of the magnetic field in a case of the non-magnetic materials especially focused on magnesium plate. So, In this study, the magnetic density flux was predicted using simulation program. As a result, the magnetic density flux was lower at the center of pole on inductor than outside. It had same result on the experimental verification. And magnetic force was lower according to increase of working gap. So, to improve the magnetic force, permanent magnet was installed under the workpiece. In that case, the magnetic density flux not only at center but also at outside of pole was increased. Therefore, the efficiency of magnetic abrasive polishing was also increased. A design of experimental method was adopted for assessment of parameters' effect on the MAP results of magnesium plate for improving the magnetic force.

• 대한기계학회논문집A
• /
• 제36권3호
• /
• pp.259-264
• /
• 2012

비자성체의 자유곡면 자기연마 공정에서 자기력 세기의 향상은 매우 중요하다. 비자성체 자유곡면의 표면에 발생하는 자기력의 세기에 따라 자기연마 입자가 가지는 수직 절삭력이 변화하기 때문이다. 이러한 자기력 향상을 위하여 전자석 배열 테이블이 적용된 제 2세대 자기연마공정이 비자성체의 자유곡면 자기연마에 적용된다. 본 연구에서는 이러한 제 2세대 자기연마공정에서 전자석 배열 테이블에 발생하는 자기력 세기 향상을 위한 극성배열 방법을 제시하고 이를 알루미늄합금의 곡률 자기연마에 적용하였다. 그 결과 볼록 및 오목 형상에서 각각 S-N-S와 S-N-N-N-S 극성 배열에서 가장 높은 표면거칠기의 향상을 확인하였다. 또한 상승 가공경로에서 상대적으로 높은 표면거칠기 향상을 나타내었다.

• 대한수학회논문집
• /
• 제16권3호
• /
• pp.415-425
• /
• 2001

We consider the problem of determining conductivity of the medium from the measurements of the electric potential on the boundary and the corresponding current flux across the boundary. We give a formula for reconstructing the conductivity and its normal derivative at the point of the boundary simultaneously from the localized Diichlet to Neumann map around that point.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.383-386
• /
• 2006

Subsurface temperature is affected by heat advection due to groundwater advection. Temperature-depth profile can be perturbed especially when there are significant vertical groundwater flux caused by external force such as injection or extraction. This research is to clarify the change of subsurface temperature distribution when the 40m x l0m sandy aquifer is stimulated by two different vertical flux($case1:\;{\pm}10^{-5}m^3/s,\;case2:\;{\pm}4{\times}10^{-5}m^3/s$) using a program called HydroGeoSphere. The resulting temperature distribution contour map shows pumping causes vertical attraction of water from deeper and warmer place which result in rising up isotherm. Additionally more injection/extraction rate, more vertical groundwater flux leads to faster Increase in temperature near the pumping well.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.298-303
• /
• 2013

Magnetic abrasive polishing is one of the most promising finishing methods applicable to complex surfaces. Nevertheless this process has a low efficiency when applied to very hardened materials. For this reason, EP-MAP hybrid process was developed. EP-MAP process is expected to machine complex and hardened materials. In this research, deburring process using EP-MAP hybrid process was proposed. EP-MAP deburring process is applied to micro channel, thereby it can obtain both deburring process and polishing process. EP-MAP deburring process on the micro channel was performed. Through design of experiment method, error of height in this process according to process parameter is analyzed. When the level 1 parameter A(magnetic flux density) and level 2 parameter B(electric potential), C(working gap) and level 3 parameter D(feed rate) are applied in the deburring process using EP-MAP hybrid process, it provides optimum result of EP-MAP hybrid deburring process.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.71-73
• /
• 2011

Hybrid electric vehicles have attracted much attention of late, emphasizing the necessity of developing traction motors with a high input current and a wide speed range. Among such traction motors, various researches have been conducted on interior permanent-magnet synchronous motors (IPMSMs) with high power density and mechanical solidity. Due to the complexity of its parameters, however, with nonlinear motor characteristics and current vector control, it is actually difficult to accurately estimate the base speed within an actual operating speed range or a voltage limit. Moreover, it is impossible to construct an efficiency map as the efficiency differs according to the control mode. In this study, a simulation method for operation performance considering the nonlinearity of IPMSM was proposed. For this, datasets of various nonlinear parameters were made via the finite-element method and interpolation. Maximum torque-per-ampere and flux-weakening control were accurately simulated using the datasets, and an IPMSM efficiency map was accurately constructed based on the simulation. Lastly, the validity of the simulation was verified through tests.