• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.399-406
• /
• 2001

Thermally induced vibration response of composite thin walled beams is investigated. The thin-walled beam model incorporates a number of nonclassical effects of transverse shear, primary and secondary warping, rotary inertia and anisotropy of constituent materials. Thermally induced vibration response characteristics of a composite thin walled beam exhibiting the circumferentially uniform system(CUS) configuration are exploited in connection with the structural bending-torsion coupling resulting from directional properties of fiber reinforced composite materials and from ply stacking sequence. A coupled thermal structure analysis that includes the effects of structural deformations on heating and temperature gradient is investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1228-1233
• /
• 2000

A new planform of a wing having two sweep angles is proposed to enhance the aeroelastic stability of a swept-forward wing. The double-swept wing has two sweep angles with inboard wing swept-back and outboard wing swept-forward. Aeroelastic analysis is performed with the finite element method to model wing structure and the doublet point method to predict aerodynamic loads. The sweep angle of the inboard wing is varied in this analysis while the outboard wing is swept forward to a pre-selected amount. The results show that the aeroelastic stability can be drastically enhanced by adjusting the sweep angle of the inboard wing. The effect of the fiber orientation in the double-swept composite wing is studied and the proper ply angle is identified to maximize critical speed.

• Tribology and Lubricants
• /
• 제17권1호
• /
• pp.56-63
• /
• 2001

The dynamic behavior of rotor-bearing system used in swash plate compressor has been investigated using the combined methodologies of finite elements and transfer matrices. The finite element is formulated including the field element for a shaft section and the point element for swash plate, disk pulley and bearings. The Houbolt method is used to consider the time march for the integration of the system equations. The transient whirl response of rotating shaft supported on roller bearings is obtained, considering compression forces and unbalance forces at swash plate and driving pulley. And, the steady state displacements of the rotor are compared with a variation in unbalance mass. Results show that the loci of rotating shaft considering unbalance forces and external compression forces are more severe in flutter motion than with only unbalance forces.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.72-77
• /
• 2011

In this study, the natural frequencies and mode shape of an external mounting pod were verified using the modal analysis and modal testing technique for a pod mounted on an aircraft. The procedure associated with the FEM building of an external mounted pod to predict the dynamic behavior of aircraft structures is described. The simplified FEM reflecting the results of the modal testing of a pod is built through the optimization, applied to the structural dynamic model of an Aircraft, used to verified the stability of vibration and flutter of an aircraft.

• International Journal of Fluid Machinery and Systems
• /
• 제2권2호
• /
• pp.179-188
• /
• 2009

Recent development of high speed computers and use of optimization techniques have given a big momentum of turbomachinery design replacing expensive experimental cost as well as trial and error approaches. The surrogate based optimization techniques being used for aerodynamic turbomachinery designs coupled with Reynolds-averaged Navier-Stokes equations analysis involve single- and multi-objective optimization methods. The objectives commonly tried to improve were adiabatic efficiency, pressure ratio, weight etc. Presently coupling the fluid flow and structural analysis is being tried to find better design in terms of weight, flutter and vibration, and turbine life. The present article reviews the surrogate based optimization techniques used recently in turbomachinery shape optimizations.

• Wind and Structures
• /
• 제2권2호
• /
• pp.95-104
• /
• 1999

The dynamic properties of one-span or multi-span reinforced concrete footbridges of catenary form (see e.g., Fig. 1) include the very low fundamental natural frequency, usually near the step-frequency of pedestrians, and the low damping of bending vibrations. The paper summarized the results of model as well as full-scale measurements with particular reference to the influence of torsional rigidity of the stress-ribbon on the magnitude of aerodynamic response, the results of measurements on footbridges of catenary form being completed by results obtained on footbridges of some other types. Additionally the influence of the local broadening of the bridge deck on the bridge response was tested. Starting from these results the criterion has been derived for the decision, whether the flutter analysis is necessary for the design of the footbridge.

• Wind and Structures
• /
• 제3권1호
• /
• pp.41-58
• /
• 2000

According to research currently developed by several authors (including the present ones) a multimode approach to the aeroelastic instability can be appropriate for suspension bridges with very long span and so with close natural frequencies. Extending that research, this paper deals in particular with: i) the role of along-wind modes, underlined also by means of the flutter mode representation; ii) the effects of a variation of the mean wind speed along the span. A characterisation of the response in the time domain by means of an energetic approach is also discussed.

• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.91-99
• /
• 2005

ALQ-X ECM 포드를 KF-16D와 RF-4C 항공기에 장착하기 위한 비행적합성 인증을 수행하였다. MIL-HDBK-1763에 부합하는 외부장착 스토어 인증 절차를 계획한 후 유사성 분석, 기존 스토어 질량 및 관성모멘트 분석, 구조해석 및 시험, 지상진동시험 및 플러터해석을 수행하여 비행시험 수행에 대한 안전성을 확인하였다. ALQ-X 장착 형상을 대표하는 비행 형상으로 MIL-HDBK-1763 Test 250 비행시험을 하였다. ALQ-X 장착 전, 후의 비행특성 차이를 분석하여 조종성을 평가 하고 구조건전성과 내구성은 계측데이터를 함께 분석하여 ALQ-X가 KF-16D 및 RF-4C와 적합성이 있음을 확인하였다. 그 결과로서 ALQ-X를 기존에 인증된 ALQ-88 및 ALQ-119와 동일하게 운용할 수 있음을 인증하였다. ALQ-X 비행인증 결과로서 도입 전투기에 대한 TYPE III 비행적합성 인증, 시험데이터를 사용한 플러터 해석 프로그램을 개발, MIL-STD-1553B 데이터버스를 사용한 비행시험 데이터를 획득할 수 있는 기법과 같은 기술적 성과를 거두었다. 본 비행인증 결과는 향후 국내에서 수행할 Type III 형식의 외부장착 스토어 비행인증의 모델케이스가 될 것으로 기대한다.

• 항공우주기술
• /
• 제4권1호
• /
• pp.1-8
• /
• 2005

미감항규정인 FAR과 이에 기반한 하중해석 절차를 설명하였다. 하중해석을 위해서는 규정과 하중조건을 준비하고, 공기력, 중량 및 구조 모델링을 수행해야 한다. 항공기 비행하중 해석시 공기력은 일반적으로 패널방법을 이용하여 산출하게 된다. 본 연구에서는 하중해석을 위해 In-house 프로그램인 ARGON을 사용하였다. ARGON은 KARI와 TsAGI가 공동 개발한 고정익 항공기 설계 프로그램으로서 비행하중, 지상하중, 플러터 및 응력해석을 지원한다. 본 논문에서는 ARGON을 이용하여 4인승 선미익 항공기 개발에 있어 필수적인 비행하중 해석을 수행하였고 그 결과를 제시하였다.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.76-84
• /
• 2005

스마트 무인기 비행하중해석을 위해서는 규정과 하중조건을 준비하고, 공기력, 중량 및 구조 모델링을 수행해야 한다. 항공기 비행하중 해석시 공기력은 일반적으로 패널방법을 이용하여 산출하게 된다. 본 연구에서는 하중해석을 위해 In-house 프로그램인 ARGON을 사용하였다. ARGON은 KARI와 TsAGI가 공동 개발한 고정익 항공기 설계 프로그램으로서 비행하중, 지상하중, 플러터 및 응력해석을 지원한다. 본 논문에서는 FAR 23급 항공기인 스마트 무인기의 비행하중해석을 ARGON을 이용하여 수행하였고 그 결과를 제시하였다.