• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.1
• /
• pp.52-60
• /
• 2009

A printing defect known as fluting (or waviness) of the web printed by heatset web offset printing process is one of the chronically serious problems deteriorating print quality. In this paper, fluting occurrence on uncoated papers was explored in terms of many printing conditions including drying temperature, fountain solution amount, ink supply, and press configurations. For this purpose, fluting on prints from real press runs was appraised in a quantitative manner. As results, ink supply was a distinctive factor for fluting such that the lower ink amount, the milder fluting. However increase in fountain solution seemed to make fluting severer while the effect of drying temperature was inconsistent for each paper. This result might indicate variable drying requirements for each paper. Thereby it was suggested that the optimum drying conditions related to the printabilities of each paper need to be established to minimize fluting potential. A press with short dryer and drastic cooling unit produced higher fluting. Suggestions for future work were given along with interpretation for the results.

• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.317-322
• /
• 2007

In order to investigate the cause and condition of fluting in tangential bending of low carbon steel sheet, an analytic analysis, an experiment and a series of finite element analysis for bending process were done. The fluting in bended sheet was related with the yield point elongation of material. Due to the yield point elongation, unstable plastic hinge was occurred in course of bending of elastic perfectly plastic sheet. According to the analysis and computational results, lower yield point elongation than 5% was required to prevent fluting in 0.5-0.6t sheet in $15{\sim}25mm$ radius bending. The tendency of fluting occurrence was reduced as decreasing the radius of bending, increasing thickness of bended sheet, and removing irregularity in sheet and bending processes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.336-339
• /
• 2007

In order to investigate the cause of fluting in tangential bending of low carbon steel sheet, an analytic analysis, an experiment and a series of finite element analysis for bending process were done. The fluting in bended sheet was due to the yield point elongation of material. Due to the yield point elongation, unstable plastic hinge was occurred in course of bending of elastic perfectly plastic sheet. According to the analysis and computational results, lower yield point elongation than 5% was required to prevent fluting in $0.5{\sim}0.6t$ sheet in $15{\sim}20mm$ radius bending.

• Transactions of Materials Processing
• /
• v.24 no.4
• /
• pp.241-247
• /
• 2015

In order to prevent shape defects such as fluting and stretcher strains during press forming of aged low carbon steel sheets, roller leveling conditions for reducing yield point elongation were studied. Yield point elongations of leveled sheets were determined as a function of leveling, which is defined as the plastic fraction or the ratio of plastically deformed part in sheet thickness section to the whole thickness of the sheet. By adjusting this plastic fraction during leveling to more than 78%, yield point elongation in the leveled sheets was reduced so no fluting occurred during subsequent tangential bending. Stretcher strains can be avoided by leveling the sheet to an 84% plastic fraction condition.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.106-111
• /
• 2010

In this study, we performed corrugation fluting experiments to examine the relationship between high-low corrugation of a corrugated medium and compressive strength of corrugated containers for food packaging. A low-grade corrugated medium was found to suffer from weak tensile resistance and to be prone to stealing, which tends to produce low corrugation. In contrast, a medium with a large corrugation deviation often caused slimming during fluting and produced irregular corrugations. Experiments of high-low corrugation distribution according to corrugated medium grades indicate that a high grade medium shows a smaller ratio of low corrugation. The thickness of corrugated fiberboard is weakly correlated to the basis weight of medium, yet positively correlated to the medium thickness (y=3.9732x+4.2712, $R^{2}=0.8142$) and inversely proportional to the medium density (y=-3.1213x+6.8736, $R^{2}=0.9919$). Compressive strength of a corrugated fiberboard box is low, if made of corrugated medium with large low corrugation distribution. Compressive strength showed 13% variation with respect to medium grades and 21% variation for various test samples. The corrugation fluting of a corrugated medium is related to physical properties such as basis thickness and density.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.37-42
• /
• 2008

Defects of corrugated board were limiting factors to the corrugated industry's growth. On-line detecting systems of defects are beneficial to increase profits of the corrugated board companies by reducing base paper consumption, increasing process reliability, and increasing productivity. By replacing naked eye inspection of defects to a defects detecting system, continuous inspection without fatigue may guarantee final products quality. The system was developed, which was consisted of line scan CCD camera, lens, illuminating parts, high speed image processor, software, various input parts, and output parts. First installation location of the system was at before fluting process after base paper unwinding, and surface of liner board was inspected by the system. Second installation location was after fluting process and combining process for liner board. Production loss includes ragged appearance of edge, irregular flute shape, wrong combination of flute, score cracking, defects in base paper, and flute cracking. The production loss was analyzed before and after the system installation at a commercial domestic mill. The production loss ratio was defined as a production loss weight per total production weight. The production loss ratio before the installation was decreased a lot from 1.28%(during 3 months before installation) to 0.76%(during 12 months after the first installation) and to 0.25%(during 6 months after the second installation).

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.552-554
• /
• 1999

In this paper, a robust control system with the disturbance observer is proposed for BLDC servo system. The overall control system consists of the speed controller which is implemented with PI controller and the disturbance observer with free parameters. The proposed control system is designed the command input response and the closed loop characteristics independently by using two-degrees-of-freedom concept, so it can improve the closed loop characteristics with no influence on the command input response. The effective suppression of disturbance with the observer improves the characteristics of the closed loop of the system. And also, by fluting the bandwidth of free parameters, measurement noise is considered. To verify the better performance of the proposed control system than that of the conventional PI controllers, the performance of the controller is analyzed theoretically and some simulation results are presented.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.184-189
• /
• 2006

In the process of accurate manufacture and measurement, it is necessarily required to isolate external or internal vibration due to external disturbance and internal actuators. The higher vibration isolation system gets damping around resonance, the better it is generally. This paper analyzes the performance of an existing passive air-spring for vibration isolation table by rising experiment and simulation. Optimal design for a passive air spring can be obtained by fluting the size of the orifice. Also design for an active isolation system is carried out by applying PID controller and considering non-linearity of pneumatic characteristics with help of look-up table. We have developed the act ive vibration isolation table wi th the bet ter isolation performance.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.273-274
• /
• 2005

The purpose of this design is to find out the design for an ophthalmic hospital focusing on the patient needs and changed healthcare environment. A cellularized hospital system appears variety design. This space needs well-balanced and ease of mind, because of ophthalmic needs a clear description attention. The concept of this design is to give human colour intellect and rich colour-sense. The waiting area wall is finished the graphic design sheet of leaves, which is covered with the fluting glass and indirect lighting. The colour is extracted in nature. The colour techniques of graphic design is gradation, the colour plan select from Y to G-GB. The material is selected within natural colour. The treatment area is functional space and the waiting area is sensitivity space. The hospital design must change with user as a leader.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.3
• /
• pp.211-221
• /
• 2009

This study illustrates the relationship between the petrographic characteristics of micrographic granite and the topographic features around Ijin-ri. Light-brown to light- gray granite is composed of intergrown fine-grained quartz + orthoclase, displaying micrographic textures. Miarolitic cavities are abundant. Many micro-landforms including tor, tafoni, and gnamma occurred in the micrographic granite of the study area. Tafoni is dominant in the north and gnamma is dominant in south. From our study of the occurrence and textural properties, two alteration zones were clearly identified; one is an external zone (A) characterized by abundant of small sized miarolitic cavities and the other is an internal zone (B) having them less than zone A. The former is dominant in north, and the latter is dominant in south. Particular geomorphologic features such as fluting cores and raised rims are present in the Ijin-ri area. This suggests that development of miarolitic cavities played an important role in the formation of the various geomorphologic features. Consequently, the petrogenesis of the micrographic granite is related to geomorphologic features in the external zone typified by abundant tafoni such as the tiger rock, and the formation of a platform as micro-landforms is influenced by thetextural differences of host rock in the internal zone.