• 한국가스학회지
• /
• 제27권4호
• /
• pp.43-49
• /
• 2023

불화수소는 염산, 질산, 황산보다 산성도는 낮지만 인체에 위험한 물질 중 하나이다. 물질의 구성에서 볼 수 있듯이 Fluoride를 함유하고 있는 부식성이 강한 물질이며, 급성독성 물질로 분류할 만큼 인체에 유해성이 매우 높으나, 최근 화학공장 및 반도체 산업 등 산업계에서 없어서는 안 될 물질로 인체에 위협적인 물질이지만 산업의 확장과 발전으로 사용량이 지속적으로 증가하고 있다. 불화수소의 위험성은 2012년 사고 발생 이후 위험성이 대두 되었고 이 사고를 계기로 규제 강화로 취급시설 관리 기준이 5배 이상 늘어나게 된 원인되었다. 불화수소는 대기 중으로 노출되는 경우 불산으로 전환되며 인체에 치명적인 영향을 미칠 수 있다. 본 연구는 독성물질 누출에 의한 피해를 최소화하기 위해 방호계층을 구성하였음에도 누출된 독성물질이 사업장 내로 확산되었을 때 피해영향을 시뮬레이션으로 확인하고, 사업장 내 피해영향 시 근로자에게 발생하게 될 위험성을 제어하기 위한 방법을 제언하고자 한다.

• 대한소아치과학회지
• /
• 제24권2호
• /
• pp.428-435
• /
• 1997

For the purpose of investigating the continuous fluoride releasing from acrylic resin using removable appliances by incorporating fluoride into polymethylmethacrylate during the construction of the appliances, two kinds of fluoride were blended with acrylic powder and devided into five groups as follows. Group 1 : no fluoride (control) Group 2 : NaF 5 wt% Group 3 : NaF 10 wt% Group 4 : $CaF_2$ 5 wt% Group 5 : $CaF_2$ 10 wt% Resin specimens were tested in vitro for fluoride release with fluoride electrode and flexural strength with Instron. The results were as follows ; 1. After 24 hrs, released fluoride concentration(ppm) was the most in group 3($126.5{\pm}14.15$) then, next, group 2($49.5{\pm}4.92$), group 5($2.67{\pm}1.08$), group 4($0.81{\pm}0.30$), group 1($0.03{\pm}0.01$) in order, but after 28 days, group 3($3.37{\pm}0.31$), group 5($1.25{\pm}0.25$), group 4($0.74{\pm}0.19$), group 2($0.68{\pm}0.07$), group 1($0.03{\pm}0.01$). 2. Fluoride releasing of NaF groups were faster and more amount than $CaF_2$ groups initially but decreased significantly, later. 3. Flexural strength ($kg/cm^2$) was the biggest in group 1($602.90{\pm}69.32$), and then group 4($568.98{\pm}20.16$), group 5($556.19{\pm}5.26$), group 2($536.12{\pm}30.35$), group 3($508.44{\pm}26.16$) in order, the differences between control group and NaF groups were statistically significant (p<0.05).

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.71-76
• /
• 2011

An efficient nucleophilic [$^{18}F$]fluorination has been studied to reduce byproducts and preparation time. Instead of conventional aqueous solution of $K_2CO_3-K_{222}$, several organic solution containing inert organic salts were used to release [$^{18}F$]fluoride ion and anion bases captured in the polymer cartridge, concluding that methanol solution is the best choice. Comparing to azeotropic drying process, one min was sufficient to remove methanol completely, resulting in about 10% radioactivity saving by reducing drying time. The polymer cartridge, Chromafix$^{(R)}$ (PS-$HCO_3$) was pretreated with several anion bases to displace pre-loaded bicarbonate base. Phosphate bases showed better results than carbonate bases in terms of lower basicity. tert-Butanol solvent used as a reaction media played another critical role in nucleophilic [18F]fluorination by suppressing eliminated side product. Consequent [$^{18}F$]fluorination under the present condition afforded fast preparation of reaction solution and high radiochemical yields (98% radio-TLC, 84% RCY) with 94% of precursor remained.

• 대한소아치과학회지
• /
• 제28권1호
• /
• pp.54-66
• /
• 2001

기존의 불소방출 복합레진보다 많은 양의 불소를 방출시키기 위해 총 복합레진 중 불소의 함량이 각각 8, 16, 24wt%가 되도록 $SrF_2$계 충진재를 첨가하여 3종의 수복용 불소방출 복합레진 시험군(VF8, VF16, VF24)을 제조하고 이에 대한 물리적 성질과 세포독성 및 불소방출량을 기존의 복합레진 제품인 Heliomolar(HE), Veridonfil(VE), Z100(ZH), Aelitefil(AE) 등의 대조군과 비교 시험하여 다음과 같은 결과를 얻었다. 1. 시험군의 3점 굽힘강도는 ZH에 비해서는 낮았으나, 다른 대조군인 AE, VE와 비슷하였고, HE보다는 우수하였으며, 시험군 간의 유의차는 없었다(p<0.05). 2. 시험군의 표면경도는 ZH보다 낮았고, AE, VE와 유사하였으며, 불소 방출 대조군인 HE보다는 높았다(p<0.05). 시험군 중에서는 VF16, VF24가 VF8에 비해 표면경도가 높았다(p<0.05). 3. 시험군의 마모도는 대조군인 HE, ZH보다 낮았으며, 시험군 중에서는 VF16, VF24가 VF8에 비해 낮은 마모도를 나타내었다(p<0.05). 4. 시험군의 물흡수도는 대조군인 HE, VE, AE와 유사하였으며 ZH보다는 낮았다(p<0.05). 시험군의 용해도는 대조군인 HE와 유의차가 없었으며, VE, ZH, AE보다 높은 용해도를 나타내었다(p<0.05). 5. 시험군은 대조군인 HE보다 $9\sim23$배 많은 양의 불소를 방출하였으며, 시험군의 불소방출량은 $SrF_2$계 충진재의 함유량과 비례하였다. 6. 시험군과 대조군은 모두 약한 정도의 세포독성을 나타내었다. 이상의 실험결과에서 $SrF_2$계 충진재를 첨가한 불소방출 복합레진 시험군의 물리적 성질과 세포독성은 기존의 복합레진과 유사한 것으로 나타났으며, 불소방출량은 기존의 불소방출 복합레진보다 현저히 높아 이차우식증에 대한 항우식효과도 높을 것으로 사료되었다.

• 한국위험물학회지
• /
• 제2권1호
• /
• pp.31-37
• /
• 2014

Since the unprecedented hydrogen fluoride leak accident in 2012, there has been growing demand for customized technical information for rapid response and chemical accident management agencies including the Ministry of Environment, the National Emergency Management Agency, and the National Police Agency need more information on chemicals and accident management. In this regard, this study aims to provide reliable technical data and guidelines to initial response agencies, similar to accident management technical reports of the US and Canada. In this study, we conducted a questionnaire survey and interviews on initial response agencies like fire stations, police stations, and local governments to identify new information items for appropriate initial response and improvements of current guidelines. We also collected and reviewed the Canada's TIPS, US EPA's hydrogen fluoride documents, domestic and foreign literature on applicability tests of control chemicals, and interview data, and then produced items to be listed in the technical guidelines. In addition, to establish database of on-site technical information, we carried out applicability tests for accident control data including ① emergency shut down devide, safety guard, shut down valve, ground connection, dyke, transfer pipe, scrubber, and sensor; ② literature and field survey on distribution type and transportation/storage characteristics (container identification, valve, ground connection, etc.); ③ classification and identification of storage/transportation facilities and emergency management methodslike leak prevention, chemicals control, and cutoff or bypass of rain drainage; ④ domestic/foreign analysis methods and environmental standards including portable detection methods, test standards, and exposure limits; and ⑤ comparison/evaluation of neutralization efficiency of control chemicals on toxic substances.

• 대한소아치과학회지
• /
• 제25권2호
• /
• pp.335-351
• /
• 1998

Salivary proteins which are produced in the saliary acinar cells have been known to be involved in the Calcium and phosphate metabolism. The acquired pellicle resulting from such metabolism is considered as a secondary defence membrane against tooth caries. In this respect, some proteins included in saliva probably play an important role in the prevention of demineralization in enamel. On the other hand, fluoride has long been known to prevent the demineralization of enamel by the inhibition of the growth of Streptococcus mutans(S. mutans) and by the chemical reaction with calcium and phosphate, Therefore, I have examined the roles of amylase and albumin in the demineralization of enamel and compared these preteins with fluoride in terms of anticariogenic effect. 1. The demineralization caused by S. mutans occurred slowly and progressively for the first 60 min, then the rate of demineralization was accelerated afterwards. 2. pH decreased continuously during the entire period of each experiment. 3. The demineralization was significantly inhibited by the preteatment of amylase and fluoride but albumin had little effect on it. 4. An addition of 0.1 mM lactic acid (final concentration 0.1 ${\mu}M$) caused a rapid increase in calcium concentration reaching a maximum within 10 min. 5. pH decreased rapidly by the addition of 0.1 mM lactic acid and reached a minimum within a few seconds followed by an increase in pH. pH reaced a plateu with 10 min. 6. Fluoride, amylase and albumin played little role in the 0.1 mM lactic acid-induced demineralization. 7. A slow infusion of 0.1 M lactic acid at a rate of 5 ${\mu}l/min$ caused a slower increase in calcium concentration compared with the bolus addition of lactic acid. 8. Fluoride had an inhibitory effect on the calcium release caused by slow infusion of lactic acid while amylase and albumin had no effect on it. These results suggest that fluoride inhibits demineralization by protecting the HA from the acid attack whereas amylase has a direct effect on S. mutans to prevent demineralization.

• 대한소아치과학회지
• /
• 제43권4호
• /
• pp.443-451
• /
• 2016

본 연구는 현재 시판되고 있는 불소 바니쉬 제품의 불소이온 유리 능력을 측정하고 이와 함께 정량 광 형광기를 이용하여 치질의 재광화 효과를 비교, 분석하였다. 평가하고자 하는 불소 바니쉬는 다음과 같은 6가지 제품을 대상으로 하였다; $FluoroDose^{(R)}$ (FD, Centrix Inc., USA), $Enamelast^{TM}$ (EL, Ultradent Product Inc., USA), $Clinpro^{TM}$ white varnish (CW, 3M ESPE, USA), $CavityShield^{TM}$ (CS, 3M ESPE, USA), V $varnish^{TM}$ (VV, Vericom, Korea), MI $varnish^{TM}$ (MI, GC, Japan). MI $varnish^{TM}$와 V $varnish^{TM}$에서 누적 불소이온 유리량과 재광화율이 가장 높게 나타난(p < 0.05) 반면 CS $varnish^{TM}$가 가장 낮은 누적 불소이온 유리량과 재광화율을 보였다(p < 0.05).

• 대한임상독성학회지
• /
• 제8권1호
• /
• pp.43-45
• /
• 2010

A 22-year-old woman was referred to our emergency department for the treatment of a chemical injury on her arm. She had accidentally spilled 99% trifluoroacetic anhydride (TFAA) over her left forearm during an organic chemistry experiment. She visited a primary care unit, and then she was referred to our hospital for inactivation of the released fluoride ions. Her skin lesions were different from those caused by hydrofluoric acid (HF) injury. The injured area showed painful whitish maculae and patchy areas with accentuated rim. No vesiculation and bulla formation was detected. We intradermally injected a 5% solution of calcium through a 24-gauge needle into the burned skin. After the injection, she complained of more severe pain. Although TFAA contains fluorine, it does not release free fluoride ions on contact with the skin, unlike HF. In fact, application of calcium gluconate for TFAA burns is not recommended. Rather, it should be avoided since it increases pain and local abscess formation.

• 센서학회지
• /
• 제32권5호
• /
• pp.328-333
• /
• 2023

This study experimentally verified the etch rate of the SiO₂ sacrificial layer etching process with a single etch hole using vapor-phase hydrogen fluoride (VHF) etching. To fabricate small-sized polysilicon etch holes, both circular and triangular pattern masks were employed. Etch holes were fabricated in the polysilicon thin film on the SiO₂ sacrificial layer, and VHF etching was performed to release the polysilicon thin film. The lateral etch rate was measured for varying etch hole sizes and sacrificial layer thicknesses. Based on the measured results, we obtained an approximate equation for the etch rate as a function of the etch hole size and sacrificial layer thickness. The etch rates obtained in this study can be utilized to minimize structural damage caused by incomplete or excessive etching in sacrificial layer processes. In addition, the results of this study provide insights for optimizing sacrificial layer etching and properly designing the size and spacing of the etch holes. In the future, further research will be conducted to explore the formation of structures using chemical vapor deposition (CVD) processes to simultaneously seal etch hole and prevent adhesion owing to polysilicon film vibration.

• 대한심미치과학회지
• /
• 제8권1호
• /
• pp.76-82
• /
• 1999

Zinc phosphate cement has long been the material of choice for permanent luting of cast restorations, and through many years of use has been considered effective to retain castings. However, cast restorations cemented with this material have been susceptible to secondary caries. Glass ionomer luting agents become available in the late 1970s. These material s, through release of fluoride, show considerable promise as a means of reducing secondary caries. Other favorable traits include significantly less disintegration in vivo than zinc phosphate cements, a film thickness comparable to that of zinc phosphate cement, and adhesion to tooth structure. Compomer materials were created in 1993 as a filling material for deciduous teeth, cervical lesions, and class III cavities. In the meantime, compomer have been developed as chemical hardening cements for cast gold restorations. The aim of this paper is to review the articles on luting cements to help the choice of dental cements.