• 대한소아치과학회지
• /
• 제49권2호
• /
• pp.197-205
• /
• 2022

이 연구는 국내에서 불소치약의 농도에 따른 불소함유 수복재의 불소 재방출량의 차이를 알아보기 위하여 시행되었다. 글라스아이오노머(Fuji IX GP EXTRA), 레진강화형 글라스아이오노머(Fuji II LC), alkasite 수복재(Cention N), 복합레진(Filtek^TM Z350XT)의 시편이 제작되었고, 1, 3, 7, 14, 21, 28일에 불소 방출량이 측정되었다. 그 후, 각 수복재에 무불소, 500 ppm, 1450 ppm의 불소치약을 적용하여 불소 재방출량을 1, 3, 7일에 측정하였다. 글라스아이오노머가 측정 7일차 까지는 가장 높은 누적 불소 방출량을 보였고, 14일차부터는 레진강화형 글라스아이오노머가 가장 높은 누적 불소 방출량을 보였으나, 두 수복재의 누적 불소 방출량의 차이는 유의하지 않았다. 500 ppm의 불소치약으로 불소 재충전 시에는 alkasite 수복재만 불소 재방출량의 차이가 유의하였고(p < 0.017), 1450 ppm의 불소치약으로 불소 재충전 시에는 모든 수복재 군이 무불소치약군에 비하여 불소 재방출량이 유의하게 높았다(p < 0.017).

• 대한치과재료학회지
• /
• 제44권1호
• /
• pp.21-31
• /
• 2017

The purpose of this study was to fabricate a biocompatible fluoride varnish with sustained fluoride release, and to compare it with commercial fluoride varnishes. For the experimental fluoride varnish, bis-GMA (BG) or two types of rosin (KR-610: K0, KR-612: K2) were used as bases. Either ethyl acetate or ethanol was added as solvent and 5 wt% NaF was used. 5 mg of experimental F- varnishes and 2 commercial products, Cavity shield (CS) and Flor-opal (FO), were applied on a labial surface of bovine teeth ($10mm{\times}7mm$). The amount of fluoride release was measured at 1 hr, 2 hrs, 3 hrs, 4 hrs, 8 hrs, 12 hrs, 1 day, 3 days, 5 days, 10 days, 15 days, 20 days and 30 days. MTT test was done with diluted F- varnishes using ethanol. Statistical analysis was done with one-way ANOVA and Duncan multiple range test (${\alpha}=0.05$). BG showed the highest fluoride release at 1 hr (P<0.05), while that of K0 was highest at 2 hrs (P<0.05). From 1 day to 5 days, experimental fluoride varnishes showed higher fluoride release than the commercial products (P<0.05), and there were no significant differences after 5 days (P>0.05). For MTT test, K0 and FO showed higher cell viability than other experimental groups (P<0.05), with no significant differences with K2 (P>0.05). Considering the sustained fluoride release and cell viability of the experimental rosin-based fluoride varnishes compared with commercial products, it will be appropriate for clinical application.

• 대한소아치과학회지
• /
• 제47권2호
• /
• pp.196-204
• /
• 2020

이 연구는 두 종류의 글라스 아이오노머와 'alkasite' 계열 수복재의 불소 유리 및 재충전 양상을 비교, 평가하기 위해 시행되었다. 글라스 아이오노머 Fuji IX GP와 Riva Self Cure, 'alkasite' 수복재인 Cention N, 복합레진 Filtek™ Z350XT의 시편을 직경 10.0 mm, 높이 2.0 mm의 원반 형태로 제작하였다. 총 28일간 불소 유리량을 측정한 이후, 각 재료별로 시편을 두 군으로 분류하였다. 실험군에는 1.23% acidulated phosphate fluoride(APF) gel을 1분간 도포하고, 이후 7일간의 불소 유리량 측정을 통해 대조군과 비교하여 각 재료의 불소 재충전 여부를 평가하였다. 불소 유리량은 Riva Self Cure, Fuji IX GP, Cention N의 순으로 높게 나타났다(p < 0.05). Cention N의 불소 유리량은 Fuji IX GP의 약 49% 수준으로 측정되었다. 또한, Riva Self Cure, Fuji IX GP, Cention N에서 1.23% APF gel의 도포 후 불소 유리량의 증가가 관찰되어(p < 0.05), 글라스 아이오노머뿐 아니라 Cention N에서도 불소의 재충전 양상이 확인되었다.

• 대한약리학회지
• /
• 제8권2호
• /
• pp.41-47
• /
• 1972

Fluorides were supposed to exert a stimulatory action on the catecholamine release. In this study, the authors attempted to investigate the action of sodium fluoride on the catecholamine release from the isolated perfused cow adrenal gland and rat heart. And also the inhibitory effect of sodium fluoride on the monoamine oxidase activity in rat heart and liver mitochondria was investigated. The monoamine oxidase activity was measured by the conversion of benzylamine to benzaldehyde. The results obtained were follows; 1. Sodium fluoride stimulated the release of catecholamine from the isolated perfused cow adrenal gland and rat heart. 2. Sodium fluoride inhibited the rat heart and liver mitochondrial monoamine oxidase activity.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.25-32
• /
• 2005

The purpose of this study was to examine an effect of fluoride recharging on fluoride release and surface change of fluoride-releasing restorative materials. Six commercially available fluoride releasing restorative materials (Fuji II LC Improved: FL, Compoglass F: CF, Dyract AP: DA, F2000: FT, Gradia Direct: GD, and Tetric Ceram: TC) were selected as experimental materials. Disk specimens were fabricated with split teflon mold to the final dimensions of 15 mm in diameter and 1 mm in thickness. Ten samples of each material were fabricated and stored in deionized water at $37^{\circ}C{\pm}1^{\circ}C$ for 3 months. Before fluoride recharging, all specimens were polished sequentially from #800 to #2000 emery papers. Fluoride recharging was done at 5-day interval using 2.0% NaF gel. The release of fluoride into the storage water was monitored using a fluoride ion electrode. Data were analyzed by one-way ANOVA and Tukey's multiple range test. The results obtained were summarized as follows; 1. Fluoride recharge capability were FL > CF > DA and TC group after 12 times exposure to 2.0% NaF gel (P<0.05). 2. All the experimental materials, except for FT group, showed the increase of fluoride release and surface roughness. 3. Fluoride-releasing rates returned to base line within 3 days.

• Restorative Dentistry and Endodontics
• /
• 제18권1호
• /
• pp.27-37
• /
• 1993

The purpose of this study was to determine the fluroide release levels of new fluoride-containing liner/base cements and the fluoride uptake by dentin surfaces. Ten specimens of each brand (Fuji ionomer Type III, Fuji Lining LC, Timeline, Vitrebond and XR ionomer) were made, polymerized and placed in fluoride-free distilled water at $37^{\circ}C$, 100% relative humidity for 24 hours. The extracting solution of specimen was exchanged and fluoride release was measured daily for the 30 days. For fluoride uptake study, twenty-five extracted human lower molars were sectioned longitudinally in the mesiodistal direction with a diamond disc. Five teeth were filled with each material and then stored at $37^{\circ}C$, 100% humidity for 4 weeks. Fluoride uptake by dentin from the test materials was evaluated using electron probe micro X-ray analyzer. The following results were obtained : 1. The amounts of fluoride release showed no significant difference between Fuji ionomer Type III and Fuji Lining LC, but showed significant difference between other groups. XR ionomer released significantly greater fluoride than any other group(P<.001). 2. All the materials have a burst effect which more fluoride released in then first 3 day and showed significant decrease over the test period (P<0.001). 3. XR ionomer group showed fluoride penetration to approximately $50{\mu}m$ deep in dentin. But other material groups showed very little fluoride uptake by dentin.

• 대한소아치과학회지
• /
• 제51권2호
• /
• pp.132-139
• /
• 2024

This study aimed to compare the fluoride-releasing ability and degree of microbial attachment of a newly developed glass-hybrid restorative material (GH) with those of a high-viscosity glass ionomer (HvGIC), resin-modified glass ionomer (RMGI), and composite resin (CR). In addition, the correlation between fluoride-releasing ability and microbial attachment between materials was evaluated. Specimens were prepared in a disc shape and divided into 4 groups according to the materials (GH, HvGIC, RMGI, and CR). The fluoride release experiments were performed in each group (n = 15). The amount of fluoride released was measured on days 1, 3, 7, 14, 28, and 42 after storage. For the microbial attachment experiment, 12 specimens were produced per group using Mutans Streptococci (S.mutans ), a cariogenic microorganism. S. mutans was cultured on the specimens for 24 hours, and the number of bacteria was measured. GH had the highest cumulative fluoride release and showed a significant difference when compared with RMGI (p = 0.001) and CR (p < 0.0001). Microbial attachment was the lowest in GH; however, no significant difference was observed between the materials (p = 0.169). There was no significant correlation between fluoride release from materials and microbial attachment (p > 0.05). From this perspective, remineralization of low-mineralized areas could be expected due to the high fluoride release of GH, and the effect of delaying the progression of dental caries could be predicted from the low cariogenic microbial attachment. Therefore, GH might be a useful restorative material for treating immature permanent teeth with hypomineralized enamel. However, further studies are needed about the degree of remineralization of hypomineralized areas after restoration and the capacity to recharge fluoride.

• Restorative Dentistry and Endodontics
• /
• 제43권4호
• /
• pp.45.1-45.11
• /
• 2018

Objectives: This study was conducted to evaluate fluoride release and the micro-shear bond strength of resin-modified glass ionomer cement (RMGIC) in casein phosphopeptide-amorphous calcium phosphate (CPP-ACP)-remineralized caries-affected dentin (CAD). Materials and Methods: Exposed dentin surfaces of 30 human third molar teeth were divided into 2 equal groups for evaluating fluoride release and the micro-shear bond strength of RMGIC to CAD. Each group was subdivided into 3 equal subgroups: 1) control (sound dentin); 2) artificially demineralized dentin (CAD); 3) CPP-ACP remineralized dentin (remineralized CAD). To measure fluoride release, 15 disc-shaped specimens of RMGIC (4 mm in diameter and 2 mm in thickness) were bonded on one flat surface of the dentin discs of each group. Fluoride release was tested using ion chromatography at different intervals; 24 hours, 3, 5, 7 days. RMGIC micro-cylinders were built on the flat dentin surface of the 15 discs, which were prepared according to the assigned group. Micro-shear bond strength was measured after 24 hours water storage. Data were analyzed using 1- and 2-way analysis of variance and the post hoc least significant difference test (${\alpha}=0.05$). Results: Fluoride detected in solutions (at all intervals) and the micro-shear bond strength of RMGIC bonded to CPP-ACP-remineralized dentin were significantly higher than those bonded to artificial CAD (p < 0.05). Conclusions: Demineralized CAD consumes more fluoride released from RMGIC into the solution for remineralization than CPP-ACP mineralized dentin does. CPP-ACP increases the micro-shear bond strength of RMGIC to CAD.

• 대한소아치과학회지
• /
• 제45권4호
• /
• pp.418-425
• /
• 2018

이 연구의 목적은 고점도 글라스아이오노머와 레진 강화형 글라스아이오노머의 시간에 따른 불소 유리량, 미세경도, 용해도를 측정하고 비교하는 것이다. 고점도 글라스아이오노머인 Fuji IX GP EXTRA, Fuji IX GP, 레진 강화형 글라스아이오노머인 Fuji II LC를 실험군으로, Filtek$^{TM}$ Z350XT을 대조군으로 설정하였으며 탈이온수에 보관한 후 84일간 불소 유리량, 미세경도, 용해도를 측정하였다. 불소 유리량의 측정 결과 모든 글라스아이오노머는 1일에 불소 유리량이 가장 높았으며 서서히 감소하였다. 불소 유리량과 누적량은 Fuji IX GP EXTRA가 가장 높았으며 Fuji IX GP와 Fuji II LC는 유의한 차이를 보이지 않았다. 미세경도 측정 결과 모든 실험군에서 수분 노출 1일 후 측정에서 미세경도의 감소를 보였으며 84일 후 미세경도는 Fuji IX GP EXTRA와 Fuji IX GP가 유의한 차이를 보이지 않았고 Fuji II LC이 가장 낮았다. 용해도 측정에서 Fuji IX GP EXTRA, Fuji IX GP, Fuji II LC은 21일까지 급격히 증가하였으며 21일 이후에는 세 군이 유의한 차이를 보이지 않았다. 결과적으로 단기간의 불소 유리는 용해도와 미세경도에 영향을 미치지만 장기간의 불소 유리는 물성과 상관관계를 가지지 않았다. 이 연구를 통하여 여러 가지 글라스아이오노머의 불소 유리량, 미세경도, 용해도를 평가하였으며 이러한 특성을 임상적으로 적용 할 수 있을 것이다.

• 대한소아치과학회지
• /
• 제37권4호
• /
• pp.429-437
• /
• 2010

Giomer는 글라스 아이오노머의 불소 유리 능력과 복합 레진의 물리적 성질을 동시에 가지고 있는 새로운 형태의 치과용수복 재료로 소개되고 있다. 그러나, 최근에 시판되고 있는 giomer의 실제 불소 유리 수준과 지속적인 불소 유리에 따른 물성 저하에 관한 연구는 아직까지 미흡한 실정이다. 이에 본 연구에서는 giomer의 시간 경과에 따른 불소 유리량과 미세경도를 측정하고 기존에 소개된 불소 유리 수복재료인 레진 강화형 글라스 아이오노머 및 컴포머와 비교하여 다음과 같은 결과를 얻었다. 1. 복합 레진을 제외한 모든 수복재에서 불소 유리가 관찰되었으며 첫째 날 유리량이 가장 높았고 이후 급격히 감소하여 7일 후부터는 완만하게 유지되는 양상을 보였다. 2. 31일간 누적 불소 유리량은 III군(레진 강화형 글라스 아이오노머)에서 57.941 ppm으로 가장 높았으며 II군(컴포머)에서 14.643 ppm, I군(giomer)에서 2.957 ppm 순으로 높은 유리량을 보였다. 3. 수복재의 미세경도는 IV군(복합 레진)에서 가장 높았으며 I군, II군, III군 순으로 높게 측정되었다. 4. 시간 경과에 따라 미세경도는 7일째 소폭 상승하였다가 31일째 다소 감소하는 양상을 보였으나 1일째와 비교시 차이는 없었다(p>0.05). 이번 연구 결과, giomer(Beautifil II)는 컴포머(F2000 Compomer)에 비하여 낮은 불소 유리량과 유사한 미세경도를 보였다.