• Macromolecular Research
• /
• 제12권3호
• /
• pp.282-289
• /
• 2004

We have extensively characterized the fluorescence behavior of unsaturated polyester (UP) resin in the absence and presence of a 1,3-bis-(l-pyrenyl)propane (BPP) fluorescent probe at various dynamic and isothermal cure histories by means of a steady-state fluorescence technique using a front-face illumination equipment. In addition, we explored the effect of the fluorescence intensity on the relaxation of the fluorescent probe in the UP resin by resting the dynamically and isothermally cured resin at ambient temperature and pressure for 24 h. The monomer fluorescence intensity, which has two characteristic peaks at 376 and 396nm, changed noticeably depending on the cure temperature and time and provided important information with respect to the molecular and photophysical responses upon curing. The result of the fluorescence study indicates that the increased local viscosity and restricted molecular mobility of the UP resin surrounding the BPP probe after curing are both responsible for the enhancement of the monomer fluorescence intensity. Our results also demonstrate that once the BPP probe has enough time to rearrange and become isolated prior to fluorescence, a sufficient amount of fluorescence is emitted. Therefore, we note that the fluorescence behavior of this UP resin system is influenced strongly by the relaxation process of the fluorescent probe in the resin as well as process used to cure the resin.

• Bulletin of the Korean Chemical Society
• /
• 제26권1호
• /
• pp.47-50
• /
• 2005

Solvatochromic fluorescence behavior of 8-aminoquinoline based benzothiazole derivative in varying solvent systems has been investigated. Benzothiazole appended 8-aminoquinoline 3 showed distinctive fluorescence color changes depending upon the solvent polarities and the fluorescence color changes occurred over relatively wide span in visible region from 486 nm to 598 nm which can be detected with naked eye. Compound 3 also exhibited significant spectral shifts in ${\lambda}_{em}$ as a function of water composition in binary aqueous solvent systems. The changes are due to the specific interaction of 3 by hydrogen bonding with water as well as general solvent effect. The observed solvatochromic fluorescence characteristics of 3 could be used as a new probe for the micro-environmental polarity changes as well as a sensitive sensor for the determination of water composition in binary aqueous solutions.

• Bulletin of the Korean Chemical Society
• /
• 제20권11호
• /
• pp.1263-1268
• /
• 1999

The fluorescence properties and photoisomerization behavior of 1-(9-anthryl)-2-(2-quinolinyl)ethene (2-AQE) have been investigated in various solvents. Instead of phenyl ring in 1-(9-anthryl)-2-phenylethene, the intro-duction of quinoline ring reduces not only the fluorescence yield but also the photoisomerization yield, due to competition of efficient radiationless deactivation and an increase in the torsional barrier for twisting in the singlet manifold. The S1 decay parameters were found to be solvent-dependent due to the charge-transfer character of lowest S1 state. Polar solvents reduce the activation barrier to twisting, thus slight enhancing the isomerization of t-2-AQE in the singlet manifold. As solvent polarity is increased, Φf of c-2-AQE is greatly reduced, but Φc →ｔ is practically independent of solvent polarity. Dual fluorescence in t-2-AQE was observed and two fluorescing species could be assigned t-2-AQE and c-2-AQE, where the ratio between two species was dependent on the solvent polarity. Interestingly, in the concentration above 1×10 -4 M, the shapes of the fluorescence excitation spectra of t- and c-2-AQE are significantly altered without spectral changes of their fluorescence and absorption, probably due to the formation of excimer.

• Bulletin of the Korean Chemical Society
• /
• 제1권1호
• /
• pp.1-4
• /
• 1980

During the study of the kinetics of Cl atom reactions by atomic fluorescence method we observed anomalous fluorescence emission for some atomic transitions. Instead of usual decrease of the fluorescence intensity by adding substrate, 1363 A transition $(^2P^{\circ}_{3/2}{\to}^2P_{1/2})$ intensity increased by adding substrate. From the normally behaved fluorescence lines the absolute rate constant for the reaction, Cl + $CH_3Cl{\to}$, was found to be $4.2{\times}10^{-13}$ cc/molecule sec at $20^{\circ}C$.

• 폴리머
• /
• 제25권2호
• /
• pp.199-207
• /
• 2001

본 연구에서는 경화촉진제로서 N,N-dimethyl benzyl amine (BDMA) 또는 1-cyanoethyl-2-ethyl-4-methyl imidazole (2E4MZ-CN)을 포함하고 있는 산무수물계 경화제에 의한 diglycidyl ether of bisphenol-A (DGEBA)의 경화거동을 형광분석기를 사용하여 광물리적 특성 변화의 관점에서 해석하였다. 이를 위해 1,3-bis-(1-pyrene)propane (BPP) probe를 에폭시수지 내에 균일하게 도입시켰다. 주위 환경 겔화에 의한 분자의 공간구조 변화에 민감한 BPP probe는 분자내 여기체 형광을 잘 형성하였으며 에폭시수지의 경화반응에 따른 미세점도 변화 또는 분자의 움직임에 민감하였다. 에폭시수지의 경화거동은 경화시간, 경화온도 및 경화촉진제의 종류에 따른 단량체 형광세기 ($I_{M}$ ), 여기체 형광세기 ($I_{E}$ ) 그리고 $I_{M}$ /$I_{E}$ 값의 변화로부터 설명되었다. 그 결과는 이전의 DSC 또는 torsion pendulum을 이용하여 에폭시-산무수물계에 대하여 얻어진 경화거동 결과와 일치하였다. 또한, 형광분석 방법은 다른 분석 방법에서 해석이 어려운 저온영역에서의 열경화성 수지의 경화거동에 대한 정보를 제시하였다.

• 통합자연과학논문집
• /
• 제3권1호
• /
• pp.28-32
• /
• 2010

Thiophene-derivatized pentiptycenes were synthesized and characterized by NMR and UV-Vis spectroscopy. Aggregation behavior of thiophene-derivatized pentiptycenes was monitored by the measurement of fluorescence. Fluorescence intensities for the thiophene-derivatized pentiptycenes and thiophene-derivatized pentiptycenes aggregates were compared. There is no shift in the maximum of the emission wavelength. In the range of water fraction between 20% and 40%, the emission intensity of thiophene-derivatized pentiptycene aggregates remains almost identical. Fluorescence efficiency incresaed by about 5 times higher when the thiophene-derivatized pentiptycenes forms the aggregates in solution.

• Macromolecular Research
• /
• 제11권5호
• /
• pp.297-302
• /
• 2003

The imidization and cure reaction of a thermosetting phenylethynyl-terminated amic acid (LaRC PETI-5) in film form have been monitored as a function of temperature by means of a steady-state fluorescence technique using a front-face illumination method. The variation of the fluorescence emission spectra of LaRC PETI-5 can be divided into four temperature regions; Region I: below 15$0^{\circ}C$, Region II: 150-25$0^{\circ}C$, Region III: 250-35$0^{\circ}C$, and Region IV: above 35$0^{\circ}C$. The fluorescence spectra in Region I are largely influenced by residual N-methyl-2pyrrolidinone in the polymer and also slightly by partial imidization of the polymer. There is a combined effect of imidization and solvent removal on the fluorescence behavior in Region II. The spectra in Regions III and IV are due significantly to the cure reaction of LaRC PETI-5 and to a post-cure effect of the polyimide, respectively. This spectroscopic evidence indicating the transformation of the amic acid imide oligomer into the corresponding polyimide via imidization and cure, agrees well with thermal analysis results obtained previously. The intermediate stage of cure in the range of 250-30$0^{\circ}C$ predominantly influences the change of the fluorescence intensity. The later stage above 30$0^{\circ}C$ significantly influences the position of the spectrum. This fluorescence study also supports the mechanism proposed in earlier work that the crosslinking reaction takes place at the reaction sites in the conjugated polyene and the phenylethynyl end group in the polyimide chain.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1143-1150
• /
• 2000

The effects of ambient conditions on vaporizing sprays from a high-pressure swirl injector were investigated by an exciplex fluorescence method. Dopants used were 2% fluorobenzene and 9% DEMA (diethyl-methyl-amine) in 89% solution of hexane by volume. In order to examine the behavior of liquid and vapor phases inside of vaporizing sprays, ambient temperatures and pressures similar to engine atmospheres were set. It was found that the ambient pressure had a significant effect on the axial growth of spray, while ambient temperature had a great influence on the radial growth. The spatial distribution of vapor phase at temperatures above 473K became wider than that of liquid phase after half of injection duration. From the analysis of the area ratio for each phase, the middle part (region II) in the divided region was the region which liquid and vapor phases intersect. For liquid phase, fluorescence-intensity ratio was greatly changed at lms after the start of injection. However, the ratio of vapor phase was nearly uniform in each divided region throughout the injection.

• Fibers and Polymers
• /
• 제3권2호
• /
• pp.60-67
• /
• 2002

In the present study, the fluorescence behavior ova phenylethynyl-terminated imide (LaRC PETI-5) resin, a bismaleimide (BMI) resin, and various LaRC PETI-5/BMI blends with different blend compositions has been characterized as a function of heat-treatment temperature, using a steady-state fluorescence technique with a front-face illumination method far solid-state films. It is observed that there are distinguishable changes in the spectral shape, size, and position of fluorescence with varying heat-treatment temperature in the pure and blend samples. The result is qualitatively explained in terms of charge transfer complex formation as well as microenvironmental change with local mobility and viscosity occurring in the LaRC PETI-5, BMI, and their blends during the cure process. The result also implies that a steady-state fluorescence technique may be a useful tool to understand the processing conditions of polyimides and their blends in the film form on the basis of their thermo-photophysical responses.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.245.1-245.1
• /
• 2013

Polydiphenylacetylene (PDPA) derivatives are a class of conjugated polymer that contain intramolecular excimer emission originating the intramolecular stack structure. In contrast with conventional conjugated polymer, the fluorescence property of PDPA significantly depends on the intramolecular stack structure. In this regard, herein, we investigated new fluorescence switching mechanism of conjugated polyelectrolyte (CPE) based on PDPA. The developed CPE showed relatively weak fluorescence emission in water, while the polymer exhibited a great fluorescence amplification behavior by electrostatic complex with proteins. In addition, the CPE is highly sensitive to binding with a little protein despite of turn-on type fluorescence response. We found that the fluorescence switching of the CPE closely relate to a perturbation of the intramolecular stack structure. The new fluorescence switching mechanism of the CPE is very useful for protein assays and discrimination and it also would be provide new sensing approaches as basic sensing mechanism.