• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.89-92
• /
• 2008

This research analyzed the basic characteristics of unhardened concrete and the compression strength characteristics of hardened concrete according to liquidity retention agent mix rate change to improve the liquidity fluidity retention performance of high performance concrete, and produced the following results. The moment fluidity retention agent is added according to fluidity retention agent mix rate change, which increased fluidity retention agent mix rate, slump flow decreased, and in the case of slump flow according to the progress time change by the fluidity retention agent mix rates, the more fluidity retention agent mix rate increased, the lower slump flow change rate became. The moment fluidity retention agent is added according to fluidity retention agent mix rate change, fluidity retention agent mix rate increased compared to non-mixture of fluidity retention agent, and the air amount by progress time change by the fluidity retention agent mix rates slightly increased, however target range is still met and unit volume mass is inversely proportional to air amount. Compression strength according to age progress by the fluidity retention agent mix rates was shown to increase slightly with increase in fluidity retention agent mix rate, and yet the difference was not significant.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.201-202
• /
• 2019

The high performace water reducing agent with three-hours-fluidity-retention performance is developed for the purpose of entering into the global market belonging to extreme environment such as Southeast Asia and the Middle East. In this study, the fresh and mechanical properties of the high strength concrete with three-hours-fluidity-retention performance are evaluated by making mock-up members in Vietnam.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.128-129
• /
• 2018

The high performace water reducing agent with three-hours-fluidity-retention performance is developed for the purpose of entering into the global market belonging to extreme environment such as Southeast Asia and the Middle East. In this study, the fresh and mechanical properties of the concrete with three-hours-fluidity-retention performance are presented.

• 한국세라믹학회지
• /
• 제34권12호
• /
• pp.1261-1267
• /
• 1997

Four kids of powder admixtures(A, B, C, D) based on anhydrite were manufactured by mixing at a fixed rate of II-anhydrite, fly ash and active silica as an industrial by-product. Fluidity properties of cement paste such as mini-slump, apparent viscosity with elapsed time, as well as setting time of cement pastes of these admixtures substituted up to 11wt% of cement were compared to those of cement paste(SS) substisuted by marketed high-strength powder admixture(S). Among these powder admixtures, the fluidity of cement pastes(PA, PC) substituted by A and C powder admixtures manufactured from II-anhydrite and fly ash had an excellent property than that of cement paste substituted by marketed powder admixture and also a good fluidity-retention effect with elapsed time by adding of superplasticizer. The setting time of cement paste substituted by powder admixtures based on anhydrite slightly retarded than that of cement paste substituted by marketed powder admixture.

• 콘크리트학회지
• /
• 제7권5호
• /
• pp.189-199
• /
• 1995

나프탈렌술폰산 축합물( NSF) 은 시멘트 콘크리트용 고유동화제로 널리 사용되어 왔으나 경시에 따른 슬럼프 손실이 크다는 단점을 가지고 있다. NSF의 단독사용에 따른 이러한 단점을 보완하고자 유동성 유지의 서방성 기능을 지닌 무수말레인산-아크릴산의 폴리카르본산계 공중합체( MA)를 합성하였다. 합성한 MA를 NSF와 일정비율로 혼합하고 시멘트 페이스트에 적용하여 유동성 및 경시에 다른 유동성 유지성능과 유변학적 거동, 재령별 몰탈의 압축강도를 측정하여 물성에 미치는 영향을 살펴보았다. NSF에 MA를 각각 10,20 wt%씩 첨가한 NM-2가 우수한 유동성 및 유지성능을 보였으며, 유변학적 특성에서도 경과시간에 따른 전단응력 및 점도의 증가현상이 NSF단독 첨가에 비하여 지연됨으로써 시멘트 페이스트의 급격한 슬럼프 손실이 억제됨을 보여주었다. 또한 이러한 특성들은 혼화제의 투입량 및 물-시멘트비( W/C) 의 증감에 의해서도 영향을 받고 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.94-99
• /
• 1995

Naphthalene sulfonated condensatd(NSF) has been widely using for the superplasticizing of ement and concrete. But NSF has a very large mobility loss with elapsed tiom. To retain mobility of NSF during a certain time, maleic anhydride and acrylic acid copolymer(MA) was polymerized and mixed with NSF in order to perpare admixture holding mobility-retention property of cement. By applying this admixture for ement paste, we examined the fluidity and mobility retention property as a function to elapsed time and measured the compressive strength of mortar with curing time. As a result, NSF containing 20wt% of MA showed very excellent fluidity and mobility-retention property. These properties were affected by the added amount of admixture and the ratio of water to cement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.271-276
• /
• 2003

This study is about the rheological properties of cement slurry using admixtures. The variables are the type of cement(Type I, II, IV, V) and the substitution ratio of admixtures such as fly ash and slag. As a result of measuring the fluidity of various types of cement slurry at the early stage, type 2, type 4 and type 5 showed the similar property. The fluidity of type 1 and ternary blended cement was low. it is thought that it is because of the high $C_3$A content. The cement slurries containing mineral admixtures were superior in the property of fluidity retention.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.89-94
• /
• 1999

The workability of high strength concrete using high range water reducing admixture is varied rapidly according to elapsed time. For using the high strength concrete in situ, careful caution on workability is necessary. By using fly ash as a admixture, the slump loss of concrete can be reduced considerably, but the early strength of concrete used fly ash is smaller than that not used fly ash. For the purpose of elevating the utilization of fly ash on high strength concrete, the high fluidity retention and the strength development in early age are necessary in concrete used fly ash. In this study, to improve the fluidity retention and to acquire strength development on concrete used fly ash, the gypsum is applied.

• Advances in concrete construction
• /
• 제6권6호
• /
• pp.561-583
• /
• 2018

A variety of polycarboxylate ether (PCE)-based superplasticizers are commercially available. Their influence on the rheological retention and slump loss in respect of concrete differ considerably. Fluidity and slump loss are the cardinal features responsible for the quality of concrete. These are related to the dispersion of cement particles and the hydration process which are greatly influenced by type of polycarboxylate ether (PCE)-based superplasticizers. On the backdrop of relatively less studies in the context of rheological retention of high strength self-consolidating concrete (HS-SCC), the experimental investigations were carried out aiming at quantifying the effect of the six different PCE polymers (PCE 1-6) on the rheological retention of HS-SCC mixes containing two types of Ordinary Portland Cements (OPC) and unwashed crushed sand as the fine aggregate. The tests that were carried out included $T_{500}$, V-Funnel, yield stress and viscosity retention tests. The supplementary cementitious materials such as fly ash (FA) and micro-silica (MS) were also used in ternary blend keeping the mix paste volume and flow of concrete constant. Low water to binder ratio was used. The results reveal that not only the PCEs of different polymer groups behave differently, but even the PCEs of same polymer groups also behave differently. The study also indicates that the HS-SCC mixes containing PCE 6 and PCE 5 performed better as compared to the mixes containing PCE 1, PCE 2, PCE 3 and PCE 4 in respect of all the rheological tests. The PCE 6 is a new class of chemical admixtures known as Polyaryl Ether (PAE) developed by BASF to provide better rheological properties in even in HS-SCC mixes at low water to binder mix. In the present study, the PCE 6, is found to help not only in reduction in the plastic viscosity and yield stress, but also provide good rheological retention over the period of 180 minutes. Further, the early compressive strength properties (one day compressive strength) highly depend on the type of PCE polymer. The side chain length of PCE polymer and the fineness of the cement considerably affect the early strength gain.

• 공업화학
• /
• 제10권3호
• /
• pp.486-490
• /
• 1999

타일을 부착시키는 tile 전용 cement mortar가 갖추어야 하는 물성인 우수한 보수성, 작업성, open time, 처짐저항성과 타임접착강도 등을 향상시키기 위해 본 연구에서는 mortar에 첨가하는 혼화제들의 홉합비율을 달리하였을 때 나타나는 특성을 비교 분석하였다. Mortar의 보수성 효과를 주는 hydroxypropylmethylcellulose에 소량의 합성 starch을 첨가해 줌으로써 mortar는 보수성을 유지하면서 겉마름이 적게되었고, open time이 길어져 작업성이 향상되었다. 타일의 접착강도를 높이기 위해 polyacrylamide와 ethylenevinyl acetate을 첨가하여 mortar 자체 및 타일의 처짐을 줄였고, 바탕면과 타일과의 mortar 접착력을 증대시켰다. 이와 함께 melment의 첨가로 mortar에 유동성을 주어 작업성을 향상시켰다. 이들 첨가제의 필요량은 cement량에 대해 hydroxypropyl methylcellulose는 0.80~1.20%, starch 0.10~0.15%, polyacrylamide 0.001~0.015%, ethylenevinyl acetate 0.05~0.10% 및 melment 0.003~0.005%의 혼합비율일 때 tile cement mortar의 물성이 향상됨을 알 수 있었다.