• Korean Chemical Engineering Research
• /
• 제57권6호
• /
• pp.883-890
• /
• 2019

Two-phase flow near the wellbore in volatile oil reservoirs causes complications in well test analysis. In this study, the flow behavior of volatile oil reservoirs below the bubble-point pressure and the potential of radial composite model for interpretation of two-phase well test in volatile oil reservoirs was investigated. A radial composite model was used for two-phase well test analysis. A new procedure was developed to interpret well test data and estimate the radius of the two-phase region. The changes in fluid composition near the wellbore during drawdown test were found to increase the saturation pressure, which affects the saturation profile during build-up. Well test results showed that the radial composite method is a powerful tool for well test characterization and estimation of reservoir parameters. The proposed procedure was able to estimate the reservoir parameters and radius of the two-phase region with acceptable accuracy.

• 자원환경지질
• /
• 제52권1호
• /
• pp.37-48
• /
• 2019

이산화탄소 지중저장 수행 중 저류층 내부에서 나타나는 비혼성 유체의 대체 과정은 다공성 매체의 공극 표면에 대한 각 유체의 습윤 특성에 따라서 배수(drainage)와 흡수(imbibition)로 구분되는데, 각 과정 동안 나타나는 비혼성 유체 간의 거동 및 포획 양상을 이해하는 것은 주입 효율성 및 저장 안정성을 평가하는데 매우 중요하다. 본 연구에서는 다공성 매체 내 주기적인 배수와 흡수 과정의 수행을 통해 공극 구조 내 비혼성 유체의 거동 양상 및 분포의 변화를 분석하고자 하였다. 이를 위하여 2차원 마이크로모델 내부로 이산화탄소와 공극수의 대체 유체로서 선정된 헥산과 탈이온수를 주기적으로 교차 주입하는 실험을 수행하였다. 관측 결과를 이용하여 각 유체 주입 과정에서 나타나는 두 비혼성 유체의 거동 양상을 비교 분석하고, 잔류 유체의 포화도를 산정하였다. 분석의 결과로서 헥산과 탈이온수의 잔류 포획 유형을 기작에 따라 습윤성(wettability), 모관압(capillarity), 막다른 공극(dead end zone), 포위(entrapment) 그리고 우회(bypassing)로 구분하였다. 또한, 교차 주입이 거듭됨에 따라 공극 구조 내에서 주입 유체의 흐름 경로는 주 흐름 경로(main flow channel)를 중심으로 단순화되었으며, 이로 인하여 주입 유체의 대체 효율은 일정한 값으로 수렴하였다. 실험적 관측과 분석의 결과는 실제 이산화탄소 지중저장 환경에서 습윤성-비습윤성 유체의 주기적인 교차 주입이 야기하는 저장층 내 비혼성 유체의 거동과 분포, 그리고 주입 유체의 대체 효율을 예측하는데 활용될 수 있을 것으로 판단된다.

• Journal of Veterinary Science
• /
• 제21권1호
• /
• pp.6.1-6.12
• /
• 2020

Currently, the optimal resuscitation fluid remains debatable. Therefore, in the present study, we designed a trometamol-balanced solution (TBS) for use as a resuscitation fluid for hemorrhagic shock. Hemorrhagic shock was induced in 18 male Wistar-Kyoto rats, which were assigned to normal saline (NS), Ringer's solution (RS), and TBS groups. During the hemorrhagic state, their hemodynamic parameters were recorded using an Abbott i-STAT analyzer with the CG4+ cartridge (for pH, pressure of carbon dioxide, pressure of oxygen, total carbon dioxide, bicarbonate, base excess, oxygen saturation, and lactate), the CG6+ cartridge (for sodium, potassium, chloride, blood glucose, blood urea nitrogen, hematocrit, and hemoglobin), and enzyme-linked immunosorbent assay kits (calcium, magnesium, creatinine, aspartate aminotransferase, alanine aminotransferase, bilirubin, and albumin). Similar trends were found for the parameters of biochemistries, electrolytes, and blood gas, and they revealed no significant changes after blood withdrawal-induced hemorrhagic shock. However, the TBS group showed more effective ability to correct metabolic acidosis than the NS and RS groups. TBS was a feasible and safe resuscitation solution in this study and may be an alternative to NS and RS for resuscitation in hemorrhagic shock patients without liver damage.

• 폴리머
• /
• 제24권4호
• /
• pp.529-537
• /
• 2000

본 연구에서는 압출된 PP sheets를 각기 다른 조사량으로 조사 가교시켜, 겔 분율 차이에 따른 세 종류의 샘플을 만든 다음, 회분식 공정을 통해 초임계 유체 (supercritical fluid) 상태의 $CO_2$를 발포제로 사용하여 발포시켰다. 이때, 겔 분율의 차이 및 고압 반응기 내에서 충진 압력과 충진 시간이 셀 구조에 미치는 영향을 관찰하였다. 다음으로, 발포조건에 따른 셀 구조 변화를 알아보기 위해 발포온도와 발포시간을 변화시키면서 실험하였다. 고분자 샘플 내로 침투한 가스의 양은 겔 분율의 차이에 의한 변화가 거의 없었으며, 충진 압력이 2000 psi 이상일 경우 충진 압력의 영향에도 큰 영향을 받지 않았다. 겔 분율이 낮은 샘플은 발포온도나, 발포시간이 증가함에 따라 셀 크기가 불균일하게 증가하였으나, 겔 분율이 높은 샘플은 높은 발포온도와 발포시간에서도 균일하게 셀 크기를 유지하며 안정한 구조를 나타내었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권5호
• /
• pp.42-52
• /
• 2011

In this laboratory study, the changes in gas-exposed perchloroethene (PCE) saturation in sand during a PCE removal process were measured using gaseous tracers. The flux of fresh air through a glass column packed with PCEcontaminated, partially water-saturated sand drove the removal of PCE from the column. During the removal of PCE, methane, n-pentane, difluoromethane and chloroform were used as the non-reactive, PCE-partitioning, water-partitioning, and PCE and water-partitioning tracers, respectively. N-pentane was used to detect the PCE fraction exposed to the mobile gas. At water saturation of 0.11, only 65% of the PCE was found to be exposed to the mobile gas prior to the removal of PCE, as calculated from the n-pentane retardation factor. More PCE than that detected by n-pentane was depleted from the column due to volatilization through the aqueous phase. However, the ratio of gas-exposed to total PCE decreased on the removal of PCE, implying gas-exposed PCE was preferentially removed by vaporization. These results suggest that the water-insoluble, PCE-partitioning tracer (n-pentane in this study), along with other tracers, can be used to investigate the changes in fluid (including nonaqueous phase liquid) saturation and the removal mechanism during the remediation process.

• 대한기계학회논문집B
• /
• 제34권10호
• /
• pp.947-955
• /
• 2010

대부분의 석유 가스전은 탄화수소혼합물과 일반기체 등 저류층 내부 유체의 성분조성에 따라 저류층내 상거동 특성이 매우 민감하게 변화한다. 석유 가스전의 평가와 개발 생산계획을 수립함에 있어, 이러한 상거동에 따른 기체와 액체의 성분비 결정과 석유와 가스의 이상유동 해석을 위한 저류유체의 PVT관계 및 포화물성의 규명은 필수적이다. 이중에서 특히, 포화물성의 계산은 수렴성이 나빠, 이상 유동의 해석적 연구에 있어서 많은 어려움을 초래하는 원인이 되고 있다. 이에 본 연구에서는 포화물성 의 계산에 있어서 수렴도 향상을 위한 새로운 초기값 추정 방법과 근 탐색 알고리듬을 제안하고, 성능비교 등을 통한 수렴도 영향인자에 대한 분석을 시도하였다. 결과적으로, 제안된 방법을 통해 포화물성 해석 수렴성을 개선하였고 GUI 기반의 새로운 다성분 다상거동해석 시뮬레이터의 개발에 적용하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.680-683
• /
• 1987

The speech signal processing in the auditory system can be analysized based on two representations : Average discharge rate and Temporal discharge pattern. But the average discharge rate representation is restricted by the narrow dynamic range because of the rate saturation and the two tone suppression phenomena, and the temporal discharge pattern representation needs a sophisticate frequency analysis and synchrony measure. In this paper, a simple representation is proposed : using a model considering the interaction of Cochlear fluid-BM movement and a haircell model, the feature of speech signals (formant frequency and pitch of vowels) is easily estimated in the Average Synchronized Rate.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.285-290
• /
• 2000

The present study was conducted to determine flooding heat transfer limitation of a two-phase closed thermosyphon using PFC as working fluid. The variables such as pipe inner diameter, working fluid property, operating temperature were examined by way of analytic method. Comparison of experimental data on flooding heat transfer limitation shows a fairly good agreement with the analytic results. An expression fur flooding maximum heat transfer rate was formulated as a function of Bond number and saturation pressure and written as follows ; $Q_{max} =0.989{\cdot}P_s^{0.286}{\cdot}Bo^{1.74}$.

• Journal of Magnetics
• /
• 제18권2호
• /
• pp.197-201
• /
• 2013

This paper presents the conversion parameter values of the magnetic properties of magnetic fluids. These values were determined for three magnetic fluid samples containing particles with diameters between 30 ${\AA}$ and 170 ${\AA}$. The factors that may affect the value of this parameter (size of particle, magnetic properties, the presence of clusters and aggregates) are also studied. The determined values for the conversion parameter (${\gamma}$) are between 0.25 and 0.76 and the determined limit value is 0.8. Because many applications require magnetic fluids with the saturation magnetization as high as possible and the viscosity as low as possible [1], it has been considered necessary to determine this parameter which describes the quality of magnetic fluids.

• 설비공학논문집
• /
• 제14권11호
• /
• pp.880-889
• /
• 2002

The purpose of the present study is to examine the factors affecting the heat transfer limitations of screen mesh heat pipe for electronic cooling by theoretical analysis. Diameter of pipe was 6 mm, and mesh numbers are 50, 100, 150, 200 and 250 and water was selected as a working fluid. According to the change of mesh number, wick layer, inclination and saturation temperature, capillary pressure, pumping pressure, liquid friction coefficient in wick, vapor friction coefficient, capillary limitation, entrainment limitation, sonic limitation and boiling limitation we analyzed by theoretical design method of a heat pipe. As some results, the capillary limitation in small diameter of heat pipe is largely affected by mesh number and wick layer.