• Water for future
• /
• v.27 no.2
• /
• pp.73-83
• /
• 1994

The unproper development of the nearshore zone can enhance the diffusion of pollutant in the nearshore zone resulting in unbalanced sediment budget of beach which causes alteration of beach topography. Therefore, it is required to predict the effects of the envirnmental change quantitatively. In this paper, the depth-averaged and time-averaged energy balance equation is selected to acount for the wave transformation such as refraction, shoaling effect, the surf zone energy disipation, wave breaking index and bore, due to wave breaking in the shore region.(Numerical solutions are obtained by a finite difference method, ADI and Upwind. For the calculation of the wave-induced current, the unsteady nonlinear depth-averaged and time-averaged governing equation is derived based on the continuity and momentum equation for imcompressible fluid.) Numerical solutions are obtained by finite difference method considering influences of factors such as lateral mixing coefficient, bed shear stress, wave direction angle, wave steepness, wave period and bottom slope. The model is applied to the computation of wave transformation, wave-induced current and variation of mean water leel on a uniformly sloping beach.

• Journal of the Korean Society of Visualization
• /
• v.17 no.3
• /
• pp.24-31
• /
• 2019

Recently, an air-lift bio-reactor operated by micro bubbles has been utilized to product hydrogen fuel. To enhance the performance, characteristics of hydrodynamics inside the bio-reactor were analyzed using a numerical simulation for two-phase flow. An Eulerian model was employed for both of liquid and gas phases. The standard k-ε model was used for turbulence induced by micro bubbles. A Population Balance Model was employed to consider size distribution of bubbles. A hollow cylinder was introduced at the center of the reactor to reduce a dead area which disturbs circulation of CO bubbles. An appropriate diameter of the draft tube and hollow cylinder were optimized for better performance of the bio-reactor. The optimum model could be obtained when the cross-sectional area ratio of the hollow cylinder to the reactor, and the width ratio of the riser to the downcomer approached 0.4 and 3.5, respectively. Consequently, it is expected that the optimum model could enhance the performance of the bio-reactor with the homogeneous distribution and higher density of CO, and more effective mixing.

• Journal of the Mineralogical Society of Korea
• /
• v.9 no.2
• /
• pp.102-112
• /
• 1996

The precious serpentine, referring to a rare and highly valuable gem variety of serpentine group minerals, is found to occur in serpentinite from Booyo Gren Jade Mine which is located in Oesan-myun, Booyo-gun of Chungchungnam-do. Geommological properties of the precious serpentine have been investigated by use of polarizing microscope, specific gravity balance, refractometer, hardness pencils, X-ray diffractometer, XRF, ICP-MS analyser, and infrared absorption spectroscope.The precious serpentine from Booyo is colored deep green with oily luster and semi-transparent. It is highly tough and Mohs's scale of hardness is measured to be 5-6. Specific gravity is determined to be 2.67, and a single refractive index ND=1.56 is observed by a spot method, using sodium light source. X-ray powder diffraction data is represented by the reflection lines at 7.40(100), 4.64(25), 3.68(68), 2.757(69), 2.530(49), 2.549(32), and 1.710(21${\AA}$), which compares very well with that of antigorite of serpentine group minerals. The major chemical compositions of the precious serpentine group minerals. The major chemical compositions of the precious serpentine are SiO2 42.49%, MgO 39.08%, Fe2O3 3.85%, and H2O 11.87%. Besides, trace elements such as Cr(2188), Ni(1110ppm), Co(58ppm), and Ta (108ppm) are relatively spectrum shows peaks at 3670, 1190, 1070, 980 and 610cm-1. Strong absorption at 3670cm-1 is due to OH stretching, and 1190, 1070 and 980cm-1 due to SiO stretching. The absorption 610cm-1 is formed by alteration of pre-existing ultramafic rock, namely peridotite, with an introduction of fluid with very little content of CO2, under 400$^{\circ}C$ environment. Magnetite inclusions, finely disseminated in the precious serpentine, may be a result of Fe precipitation, during serpentinization of olivine-bearing country rock.

• Proceedings of the Korean Society of Food and Cookery Science Conference
• /
• 1987.06a
• /
• pp.92-106
• /
• 1987

$Na^{+}$는 체내에서 세포외액 (extracellular fluid)의 주요 양이온으로 세포내액과 세포외액은 세포막을 사이에 두고 $Na^{+}$와 $K^{+}$의 높은 농도의 차이를 유지하고 있다. 이러한 농도차이는 세포막에 있는 $Na^{+}$-K$^{+}$ATP ase의 활동에 의하여 유지되며 $Na^{+}$는 체액의 osmolarity와 혈장의 부피 유지, 신경흥분, 근육수축 및 영양소등의 이동에도 중요한 역할을 한다. 체내의 Na balance는 renin-aldosterone system에 의하여 신장에서의 배설조절로 이루어지며, 최근 Na대사에 관여하는 natriuretic hormone이 발견되고 있다. Na의 과잉섭취는 역학적 연구와 동물실험에서 고혈압의 유발인자로 제시되고 있으나, 임상적 연구에서는 Na제한이 혈압강하효과가 있다는 보고와 없다는 보고가 있어 결과가 뚜렷하지 않다. 이는 고혈압 환자중에는 salt-sensitive한 group자 salt-resistant group이 있다는 것과 산업화된 사회들의 Na 섭취량이 이미 너무 높은 수준으로 Na섭취증가와 혈압상승간의 관계를 현재의 연구 방법들로는 찾아내기 어렵다는 ‘saturation effect’로 설명한다. 그러나 Na섭취를 1일 70~100mEq.(NaCl 4.0~5.8g)이하로 줄이면 고혈압 발생이 현저히 감소하고 Na 섭취량이 1일 30mEq.(NaCl 1.7g)이하이면 고혈압은 거의 발생하지 않는다. 그러나 Na섭취가 1일 400mEq.(NaCl 23.2g)이상이 되더라도 인구 중 50~80%는 고혈압에 걸리지 않아 고혈압의 발생은 유전적 인자, 신장 기능의 부족에 의해 지배되고, Na이외에도 K, Ca등의 식이 인자 및 stress, 운동등의 환경적 요인들이 영향을 미친다. Na 섭취량은 자연식품에 들어있는 양 뿐 아니라, 가공과정, 조리가정, 식사 중에 첨가되는 양에 의하여 좌우되므로, Na 섭취량을 측정하기 매우 어렵다. 가장 널리 사용되는 방법은 24시간 소변 중 배설되는 Na의 양으로부터 추정하는 방법으로 우리나라의 경우, 이러한 방법으로 섭취량을 환산할 경우 1일 200~260mEq. (NaCl 11.6~15.1g) 정도이며 이중 80% 이상이 discretionary intake인 것으로 추정된다. 따라서 앞으로 Na섭취를 줄이도록 많은 노력을 기울여야 하겠다.

• Journal of the Korean Dietetic Association
• /
• v.23 no.1
• /
• pp.27-38
• /
• 2017

Maintaining adequate fluid balance is essential for all biological functions in the body. The purpose of this study was to evaluate vulnerability to dehydration by analyzing age, gender, body mass index (BMI), and blood lipid parameters in health checkup examinees who visited Sahmyook Seoul Hospital for comprehensive health checkups. In a binary logistic regression analysis stratified by age and body mass index the odd ratio for dehydration was as high as 3.317 (95% CI: 1.666~6.605) in the 50s age group, 4.224 (95% CI: 2.038~ 8.755) in the 60s age group, and 4.610 (95% CI: 1.943~10.940) in the above 70s age group compared to 20s reference age group. Aged females showed greater vulnerability to dehydration with significance levels of P<0.01 and P<0.001. Compared to a normal weight (BMI: 18.5~22.9) the odd ratio was higher in males with an under weight (BMI: less than 18.5) (5.130 [95% CI: 1.631~16.132]) and in females with an over weight (BMI: 23.0~24.9) (1.500 [95% CI: 1.065~2.114]). In conclusion, our results showed that vulnerability to dehydration increased with age and was higher in under weight males and over weight females than that in normal weight.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.161-166
• /
• 2003

It is the common features of the integral reactors that the main components of the RCS are installed within the reactor vessel, and so there are no any flow pipes connecting the coolant pumps or steam generators. Due to no any flow pipes, it is impossible to measure the differential pressure at the RCS of the integral reactors, and it also makes impossible measure the flow-rate of the reactor coolant. As a alternative method, the method by the measurement of coolant pump power has been introduced in this study. Up to now, we did not found out a precedent which the coolant pump power is used for the real-time flow-rate calculation at normal operation of the commercial nuclear power plants. The objective of the study is to embody the real-time flow-rate calculation method by the measurement of coolant pump power in an integral reactor. As a result of the study, we could theoretically reason that the capacity-head curve and capacity-shaft power curve around the rated capacity with the high specific-speeded axial flow pumps have each diagonally steep incline but show the similar shape. Also, we could confirm the above theoretical reasoning from the measured result of the pump motor inputs, So, it has been concluded that it is possible to calculate the real-time flow-rate by the measurement of pump motor inputs. In addition, the compensation for a above new method can be made by HBM being now used in the commercial nuclear power plants.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.357-361
• /
• 2011

The terminal current in voltage driven systems is an essential role for characterizing the pattern of electric discharge such as corona, breakdown, etc. Until now, to evaluate this terminal current, Sato's equation has been widely used in areas of high voltage and plasma discharge. Basically Sato's equation was derived by using the energy balance equation and its final form described physical meaning explicitly. To give more general abilities in Sato's equation, we present a generalized approach by directly using the Poynting's theorem incorporating the finite element method. When the magnetic field effect or the time-dependent voltage source is considered, this generalized energy method can be easily applicable to those problems with any dielectric media such as gas, fluid, and solid. As an alternative approach, the integral Ohm's law resulting in small numerical errors has an ability to be applied to multi-port systems. To test the generalized energy method and integral Ohm's law, first, the results from two prosed methods were compared to those from Sato's approach and an analytic solution in parallel plane electrodes. After verification, the generalized method was applied to the tip-sphere electrodes for evaluating the terminal current with three carriers and the Fowler-Nordheim field emission condition. From these results, we concluded that the generalized energy method can be a consistent technique for evaluating the discharge current with various dielectric materials or large magnetic field.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.88-97
• /
• 2016

A closed loop thermal control system simulates space thermal environment to verify the satellites' functionality in extremely cold/hot temperature. It is composed of a cryogenic blower, thermal shroud, heater, cryogenic valves. This paper presents an overview of closed loop thermal control system's design parameter and test results for control parameter. A capacity of blower is calculated through energy balance equation and an advantage/disadvantage for a shroud material and a type was analysed. The thermal control system is controlled by a constant density of fluid in the system. A requested performance of closed loop thermal control system was verified by measuring a homogeneity and stability of shroud through control parameter such as density and RPM of blower.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.2
• /
• pp.87-95
• /
• 2017

The concept of entransy has been proposed recently as a potential heat transfer mechanism and could be useful in analyzing and optimizing the heat-work conversion systems. This work presents an entransy analysis for the irreversible Carnot cycle by systematic balance formulations of the entransy loss, work entransy, and entransy dissipations, which are consistent with exergy balances. Additionally, several forms of system efficiency are introduced based on entransy for the appreciation of the optimal system performance. The effects of the source temperature and irreversible efficiencies on the optimal conditions for system efficiencies are systematically investigated for both dumping and non-dumping cases of used source fluid. The results show different trends in entransy efficiencies when compared to the conventional efficiencies of energy and exergy, and represent another method to assess the effective use of heat source in power generation systems.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.185-191
• /
• 1999

An air-conditioning system based on the chemical heat storage principle was considered. $H_2O$ was chosen as the reaction gas and the working fluid as well. Na$_2$S, CaCl$_2$, MnCl$_2$, BaCl$_2$, MgCl$_2$, Fe$_2$(SO$_4$)$_3$ and MnSO$_4$ were tested as the solid reactants by using Cahn pressure balance. Na$_2$S was superior to other salts in respect of high capability of absorption of water gas, 5 moles of $H_2O$ per unit mole of Na$_2$S, and adequate temperature of adsorption, $65^{\circ}C$ at 7torr, and of desorption, 13$0^{\circ}C$ at 76torr. Clausius-Clapeyron diagram of Na$_2$S was obtained via adsorption experiments at several vapor pressures of water gas. To enhance heat and mass transfer characteristics, usually below 1W/m K, of the reactor bed of general adsorption systems, expanded graphite block was adapted as the support of Na$_2$S salt. Expanded graphite blocks had thermal conductivity values of 20~80W/mK with respect to 100~400kg/㎥ of block bulk density. Permeability values of expanded graphite blocks were 10$^{-13}$ ~ 10$^{-14}$ $m^2$ with respect to 100~300kg/㎥ of block bulk density showing highly decreasing values of permeability, below 10$^{-l4}$$m^2$, in the range of above 150kg/㎥ of block bulk density.y.