• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.586-586
• /
• 2013

저밀도 플라즈마는 반도체 공정, 나노 신소재 분야 및 우주 항공 분야 등 여러 분야에 이용되며, 플라즈마 진단 및 분석을 통해 효과적인 플라즈마 제어가 가능하다. 특히, 전자 에너지 분포 함수(Electron Energy Distribution Function, EEDF)는 전자 온도, 플라즈마 밀도 및 플라즈마 전위 등의 플라즈마 변수를 측정하거나 전자 가열 매커니즘 등을 이해하는데 있어서 매우 중요하므로 정밀한 측정이 필요하다. 그러나 RF fluctuation에 의해 낮은 전자 에너지 부분에서 EEDF가 왜곡되어 측정된 데이터 및 분석의 신뢰도가 떨어지게 된다. 이러한 문제점을 해결하기 위해 RF fluctuation 보상을 위한 쵸크 필터가 사용되며, 쉬스 임피던스에 비해 쵸크필터의 임피던스가 클수록 보상 효과는 높아진다. 하지만 플라즈마의 밀도가 낮아지면 쉬스 확장에 의해 쉬스 임피던스가 증가하므로 쵸크 필터에 의한 보상만으로는 충분한 개선 효과를 얻기 힘들다. 따라서 본 연구에서는 효과적인 RF fluctuation 보상을 위해 임피던스가 높은 쵸크 필터를 설계하고 추가적으로 레퍼런스링에 전압을 걸어 쉬스의 임피던스를 줄이는 방법도 적용하였다. 유도결합방식으로 $10^{-8}cm^{-3}$ 대의 저밀도 아르곤플라즈마 방전시켰으며, 단일 랑뮤어 탐침법으로 EEDF를 측정한 결과 낮은 전자 에너지 부분의 왜곡이 개선됨을 확인하였다.

• Solar Energy
• /
• v.19 no.4
• /
• pp.63-69
• /
• 1999

The conventional grid connected PV(Photovoltaic) system has a unstable output pattern due to its dependence on the weather condition, although solar-cell array averagely has a regular output characteristics to have a peak output nearly at noon. Therefore assuming the high density grid connection in the future, this unstable output pattern can be one of the main reasons to generate power disturbance such as voltage variation, frequency variation and harmonic voltage generation in low voltage distribution line. However general grid connected solar-cell system do not have functions to cope with these disturbances. Therefore this study proposed a advanced type grid connected PV system with functions to suppress output power fluctuation due to solar-cell array output variation and showed the levelling effect of fluctuation due to instantaneous array output variation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3274-3279
• /
• 2009

The elutriation characteristics of particle size distribution were investigated in a gas-solid fluidized bed. Experiments were carried out with the mulit-sized particles of Gaussian distributions. The elutriation rate constant obtained from the experiment was correlated with the standard deviation of particle size and the dimensionless group of the velocity ratio. The standard deviation of pressure fluctuation, mean pressure, major frequency and power spectrum density function were calculated by pressure fluctuation properties. Size distribution of elutriated particles and pressure fluctuations were measured for the particle size distribution of particle system depended largrly on the size distribution. Characteristics of fluidization and elutriation were greatly influenced by the particle size distribution and these characteristics could be interpreted with pressure fluctuation properties.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.11
• /
• pp.788-797
• /
• 2010

This study examines the influence of fluctuating daylight illuminance on daylight dimming control systems. Field measurements were performed for a full-scale mocked-up model under various daylight conditions in winter. Fluctuating ranges for a partially-shielded photosensor were great when the variation of sky ratio was great. When solar altitude was lower the illuminance and fluctuating range of illuminance were great due to the influence of direct components of daylight and the interrefelction between surfaces in rear area of space. It implies that daylight dimming system would not function effectively, unless the desktop illuminance by daylight is enough. Fluctuation ranges of photosensor illuminance were lower than 50 lx under clear sky conditions, but they were greater than 100 lx under partly-cloudy sky conditions. It means that the fluctuation range of electric light output of lighting fixture would greater under the partly-cloudy conditions and cause potential visual annoyance to occupants. Outdoor vertical illuminance reaching the windows would be an effective factor that can be used to predict the fluctuation of photosensor signals for effective controls of daylight dimming system.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.06a
• /
• pp.103-113
• /
• 2004

We investigate the time-variational characteristics of power spectrum and transfer function of geomagnetic field by robust estimation technique. In the case of power spectrums of geomagnetic field, there are some the periodic fluctuations related with solar activity, Meanwhile, the geomagnetic transfer function shows so considerable weak time-variational fluctuation that the estimations of transfer function seem to be comparatively stable in time-variant view.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.661-665
• /
• 2006

This study investigates objective and subjective evaluations of refrigerator noise. To describe the fluctuations like a click, a rapid increase of sound level, a change of pitch, a transition into the stationary and ending phase, the psychoacoustical and autocorrelation function(ACF) parameters have been employed. First, subjective evaluation of the noisiness of 24 kinds of refrigerators was conducted. Then, the relationship between objective measures of the refrigerator noise on perceived noisiness was examined with multiple regression analyses. Sound Quality Indices using the psychoacoustical and ACF parameters were also developed. The important psychoacoustical parameters for evaluating noisiness are loudness and roughness of stationary phase. The relationship between the noisiness and the ACF parameters shows that sound energy ${\Phi}(0)$ and its fluctuations are important. Also, refrigerator sounds that had a fluctuation of pitch were rated as more annoying. The fluctuation of pitch is expressed by ${\tau}_1\;and\;{\Phi}_1$ defined by the delay time and the amplitude of the first peak of the ACF.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.2
• /
• pp.155-162
• /
• 2023

In nuclear power plants, the flow rate information is a major indicator of the performance of rotating equipment such as pumps, and is a very important one required for facility operation and maintenance. To measure a flow rate, various types of methods have been developed and used. Among them, the differential pressure type using orifice and the direct doppler type using ultrasonic waves are the most commonly used. However, these flow rate measurement methods have limitations in installation, conditions and status of the measuring part, etc. To solve this problem, we have studied a new technique for measuring flow rate from scratch. In this paper, we have devised a technique to estimate the flow rate using an average moving velocity of large-scale eddy in turbulence that occurs in the piping flow field. The velocity of the large-scale eddy can be measured using the pressure fluctuation signals on the inner surface of the pipe. To estimate the flow rate, at first a cross-correlation function is applied to the two pressure fluctuation signals located at different positions in the down stream for calculating the time delay between the moving eddies. In order to validate the proposed flow rate estimation method, CFD analyses for the internal turbulence flow in pipe are conducted with a fixed flow condition, where the pressure fluctuation signals on the pipe inner surface are simulated. And then the average flow velocity of the large scale eddy is to be estimated. The estimated flow velocity is turned out to be similar to the fixed (known) flow rate.

• Journal of Korean Society for Quality Management
• /
• v.21 no.1
• /
• pp.199-213
• /
• 1993

The function-cost matrix table is not constant, but can be changed by many factors including equipment capacity, level of production technique, fluctuation of production volume, and the continuous development of products. Such changes would give the VE analysists additional work burden. By using computer. in this study, much of the time and effort of the function evaluation could be saved, and the efficiency of the analysis could also be enhanced. The application of the function evaluation data of R Company, as a case analysis, to the function evaluation computer program developed in this study resulted in the faster management of function-cost matrix table and function evaluation.

• Journal of Environmental Science International
• /
• v.24 no.4
• /
• pp.461-470
• /
• 2015

As hydrogeologic parameters such as hydraulic conductivity and specific yield are estimated by aquifer test, these are dependent on specific points at which field test was conducted. To overcome these site-specific limitations, a method of estimating transmissivity of aquifer using distribution features for parameters in Water table fluctuation model is newly suggested. Distribution features in reaction factor, specific yield and transmissivity having the function of pore space in aquifer are used to derive empirical equation for estimating transmissivity. From the result for applying the equation for 10 groundwater stations in Northeast Jeju Island, this equation is available for estimating transmissivity compared to the value estimated by existing equations. The estimated transmissivity ranged from 14.2 to $3,716.9m^2/day$, and its average was $821.8m^2/day$.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.3
• /
• pp.277-283
• /
• 2008

Balance shaft module contributes to reduce the engine-born vibration by compensating it from a unbalance mass with opposite phase but practically, this device has some problems during the operation in a high speed owing to the considerable amount of unbalance mass that leads to the large quantity of bending deformation as well as torque fluctuation at the balance shaft. To tackle two main problems, the design strategy on balance shaft is suggested by addressing the optimal location of unbalance mass and supporting hearing based on the formulation of objective function that minimizes critical issues, both bending deformation as well as torque fluctuation. The boundary condition of balance shaft assumes to be free such that any external force or contact component is not taken into consideration in this study.