• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.4
• /
• pp.554-560
• /
• 2001

Hydrophilic treatment of the packing materials in a cooling tower has been made by the ion assisted reaction (IAR) method to increase the wettability of the packing materials. The effects of hydrophilic treatment of packing materials on the performance of a cooling tower have been investigated in a wide range of operating parameters, such as water flow rate, air flow rate, and the water inlet temperature. A pilot cooling tower has been designed and built to model a counter-flow cooling tower. The results obtained indicate that the packing characteristic value with hydrophilic packing could be substantially increased by 6∼19.3% than that with conventional packing in the operating ranges considered. The correlations of the packing characteristic value as a function of water-to-air ratio are suggested for a counter-flow cooling tower with hydrophilic packing as well as with conventional packing.

• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.165-170
• /
• 1995

NMR measurement has been studied for protons in pre-polarized flowing water by a separated detector working at high field far away from the measured field region where the transition of protons is occurred by the pertur-bation of RF energy. The conditions for NMR signal were optimized on the amplitude and frequency of modulation field, the RF field of detector, water speed, and RF field at the measured field region. The NMR signal with the full width of 320 nT at the half maximum in Lorentzian curve and with signal to noise ratio of 10.5 was measured in the range from a few ${\mu}T$ to mT, and its shape and amplitude were independent of the measured field intensity and its uniformity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.2
• /
• pp.142-149
• /
• 2004

Recently, the government introduced the thermal storage system for reducing the electric power load. Especially, the ice slurry type has gained lots of interest due to its good heat transfer and flowing characteristics. This study was peformed to understand the effects of transporting ice slurry through elbows of various angle. Propylene glycol water solution was used and about 2 mm ice particles were circulated. The experiments were carried out under various conditions, such as concentration and velocity of water solution ranging between 0∼20 wt％, 1.5∼2.5 m/s, respectively. And elbows with 4 different angles of 30$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$, 180$^{\circ}$. The differential pressure and IPF (ice packing factor) between the pipe entry and exit were measured. The tendency of pressure loss and outlet IPF in elbow is that the pressure loss was reduced as concentration and flow velocity of water solution is increased, and low value appeared at 10 wt％ and 2.5 m/s. The variation of outlet IPF was compared with the inlet IPF in the range of $\pm$20％.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.381-388
• /
• 2003

The fertility of stream water in major streams of the Lake Shihwa Watershed was compared using water analyses and algal growth potential test (AGPT) in typical drought seasons from December 2001 to April 2002, The water quality varied considerably depending on streams. These streams were very rich in inorganic nutrients that the nutrient levels and characteristics of each stream could be easily determined. Through AGPT, 63.6% of growth was observed in the average values of each stream, with non-growth accounting for 36.4%. AGPT results showed that 40.9% of the 22 stations were in hypertrophic condition and 54.5% in eutrophic condition. AGPT values were significantly correlated with TIN, $NH_4$, and SRP (p <0.001); compared to other nutrients, however, they were more related to SRP and $NH_4$. Moreover, the values increased with high concentration of N and P and low N/P ratios. Nonetheless, the values were more dependent on P concentration than N concentration. This suggests that the effect of P on the water quality of lake situated in downstream may serve as a potential indicator of phytoplankton development. Depending on the drainage pattern of streams, the wastewaters of wastewater treatment plant (WwTP) and untreated wastewater (UTW) were found to have 53.4% and 46.6%, respevtively, of TIN, 51.9% and 48.1% of $NH_4$, 62.9% and 37.1% of $NO_3$, 62.6% and 37.4% of SRP, and 44.1% and 55.9% of SRSi. The AGPT value was 51.1% in WwTP wastewater and 48.9% in UTW wastewater, the concentration of WwTP wastewater was slightly higher. For untreated wastewaters flowing into the constructed wetland and into the lake, TIN accounts for 43.0% and 57.0%, respectively, of nitrogen components, $NH_4$ 44.4% and 55.6%, $NO_3$ 39.6% and 60.4%, SRP 53.5% and 46.5%, and SRSi 52.3% and 47.7%, respectively. The AGPT value was 58.0% in the constructed wetland and 42.0% in Lake Shihwa; the concentration in streams flowing into the wetland was slightly higher. Therefore, Persistent and large development of phytoplankton in Lake Shihwa cannot be prevented unless a measure tophytoplankton control is implemented. This is because the concentration of nutrients in specific streams flowing into the lake is very high, even though the inflow of water is low.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.17-23
• /
• 2009

Interest in application of ultraviolet light technology for primary disinfection of potable water in drinking water treatment plants has increased significantly in recent years. The efficacy of disinfection processes in water purification systems is governed by several key factors, including reactor hydraulics, disinfectant chemistry, and microbial inactivation kinetics. The objective of this work was to develop a computational fluid dynamics(CFD) model to predict velocity fields, mass transport, chlorine decay, and microbial inactivation in a continuous flow reactor. The CFD model was also used to evaluate disinfection efficiency in alternative reactor designs. In a typical operation, water enters the inlet of a UV lamp and flows through the annular space between the quartz sleeve and the outside chamber wall. The irradiated water leaves through the outlet nozzle. In this paper, it describe the how to design optimal ultraviolet disinfection device for ground water and rainwater. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method, performed simulation and proved satisfied performance.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.237-243
• /
• 2013

Pesticides were sprayed on perilla leaf and leafy lettuce in a greenhouse and the reduction rate of pesticide residues on each vegetable by washing were tested. The reduction rate of pesticide residues by washing for 30 sec~3 min on perilla leaf were 3~63% in tap water, 2~58% in salt water, 6~74% in green tea water, and 8~86% in detergent solution. The detergent solution only showed significant difference in reduction rates compared to the tab water washing. Considering reduction effects of the washing duration, it was showed that the reduction rates were a pattern of inclining as the duration of washing process increased, but there was no significant difference in the reduction rates except the reduction rates between washing in the detergent solution for 1 min and 3 min. Comparing washing in flowing tab water and in stagnant tab water with leafy lettuce, the reduction rate by one time washing were 8~68% in flowing tab water and 7~64% in stagnant tab water. The water and the time used in this experiment were 17.5 L, 2.9 min with flowing tab water and 4 L, 1 min with stagnant tab water. The reduction rate by 3 times washing in stagnant tab water were 16.5~76.6%, and the water and the time used were 12 L, 3 min. Therefore, when the water and the time used to wash vegetables were considered, washing two or three times in stagnant tab water could be more effective than washing one time in flowing tab water.

• Korean Journal of Ichthyology
• /
• v.20 no.3
• /
• pp.179-189
• /
• 2008

Standard length (SL) and gonadosomatic index (GSI) of Plecoglossus altivelis were investigated from March to October 2007 in Seomjin River and streams flowing to the East Sea, Korea. Water temperatures were $17{\sim}23^{\circ}C$ during the spawning season, which ran from late September to early November in Seomjin River and early August to mid-October in streams flowing to the East Sea. The GSI and HSI variations of ayu population in Seomjin River increased earlier than in populations in streams flowing to the East Sea with similar variation in water temperature. Histological study of ovaries showed that the start of spawning of P. altivelis in Seomjin River was later than in streams flowing to the East Sea. Overall, fecundity increased with increase in SL and not by site specificity. The SL of P. altivelis increased as the river scale increased. Mean length of specimens from Seomjin River (river length: 223.86 km, river area: $4,911.89km^2$) was $194{\pm}15.3mm$, from Osip Stream (55.76 km, $393.78km^2$) $185{\pm}15.5mm$, from Yangyang Namdae Stream (54 km, $474.08km^2$) $142{\pm}11.8mm$, and from Joosoo Stream (21.1 km, $141.47km^2$) $136{\pm}16.7 mm$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.6
• /
• pp.1220-1227
• /
• 2001

The condensation pressure drop fur refrigerant R-22 flowing in the plate and shell heat exchanger were investigated experimentally in this study. Two vertical counterflow channels were formed in the exchanger by three plates of commercial geometry with a corrugated trapezoid shape of a chevron angel of $45^{\circ}$. The condensing R-22 flowing down in one channel exchanges heat with the cold water flowing up in the other channel. The effects of the mean vapor quality, mass flux, average imposed heat flux and system pressure of R-22 on the pressure drop were explored in detail. The quality change of R-22 between the inlet and outlet of the refrigerant channel ranges from 0.03 to 0.05. The present data showed that pressure drop increases with the vapor quality. At a higher mass flux, pressure drop is higher for the entire range of the vapor quality. Also, a rise in the average imposed heat flux causes an slight increase in the Pressure drop. Finally, at a higher system pressure the pressure drop is found to be slightly lower. Correlation is also provided for the measured pressure drops in terms of the friction factor.

• Korean Journal of Ecology and Environment
• /
• v.53 no.2
• /
• pp.138-147
• /
• 2020

The Singil Stream, flowing into an artificial lake, Lake Shihwa (South Korea), experiences a strong anthropogenic pressure with continuous organic matter (OM) inputs from rural, urban, and industrial areas. In this study, we investigated suspended particulate matter (SPM) and streambed sediments collected along the Singil Stream in 2014 and 2016, by applying a dual element approach (δ¹³C and δ¹⁵N) to identify OM sources. The SPM and streambed sediment samples from the indusrial area showed higher organic carbon and nitrogen concentrations (or contents) than those from the other areas, with distinctively lower δ¹⁵N values. Accordingly, our dual element approach indicates that the industrial area was the predominant OM source influencing OM quality and thus water quality of the Singil Stream flowing into Lake Shihwa during the study periods. However, further studies are necessary to better constrain OM sources in the Singil Stream since OM sources from the industrial area appear to be complex.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.86-95
• /
• 1986

A study on film water flow on steep open channel has been seldom found up to date. Therefore, this paper dealed with the depth variation of film thickness of water (city supply normal water) flowing on steep open channel. For this purpose, Experimental apparatus (made of a normal glass with 160cm of length and 15cm of width) was made and the depths of the water flowing on the channel were measured experimentally, changing the channel slope angle from 30 to 80 degree (5 steps) and the flow rate from 0.25 to 10CPM (11 steps). The results obtained, some characteristics of the film flow on the channel are as follows. (1) When thin film water flowed on steep open channel, the depths of flow tended to increase after decreasing and was kept nearly constant in its downstream in case of laminar and transitional flow region. The turining point of the depths of flow from decrease to increase tended to move downward with the increase of Reynolds number. In turbulent flow region, the depths of flow showed reapid decrease in its upper stream, gradual decrease in its midstream and were kept nearly constant in its downstream. (2) While the differences between the depths of flow along the channel slope got small in its upper stream and got large in its downstream in case of laminar flow region, they got very large in its upper stream and were kept nearly constant in its downstream in case of transitional and turbulent flow region. And the move flow rate increases, the more the differences between the depths of flow along the channel slope got large in its upper stream.