• 한국컴퓨터정보학회논문지
• /
• 제22권3호
• /
• pp.53-60
• /
• 2017

The purpose of this study is to provide empirical and quantitative analysis on user's perceived privacy, security, and user satisfaction when providing visualization information about objects and service provider behaviors that users can not perceive in internet service process. Through previous research, we have examined the importance of privacy and security factors as a key factor to be considered for the characteristics of the Internet of things and the Internet of things. In addition, service blueprint, which is one of the service design methodologies to examine the flow of service usage in providing Internet service of things, was examined. In the flow of things internet service utilization, it is found that the things that are out of the user's cognitive area and the behavior of the service provider take up a large part. Therefore, the hypothesis that the trust of the Internet service security and the satisfaction of the user experience can be improved by providing the security visualization information about the behavior of the object and the invisible service provider in the non-contact aspect of the user and the object. In order to verify the hypothesis, we conducted experiments and questionnaires on the use of virtual objects' internet environment and conducted statistical analysis based on them. As a result, it was analyzed that visual information feedback on non - contact and invisible objects and service provider's behaviors had a positive effect on user's perceived privacy, security, and satisfaction. In addition, we conclude that it can be used as a service design evaluation tool to eliminate psychological anxiety about security and to improve satisfaction in internet service design. We hope that this research will be a great help for the research on application method of service design method in Internet environment of objects.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.248-257
• /
• 2020

This study presents an initial design for a novel system consisting in a coupled nuclear reactor and a phase change material-based thermal energy storage (TES) component, which acts as a buffer and regulator of heat transfer between the primary and secondary loops. The goal of this concept is to enhance the capacity factor of nuclear power plants (NPPs) in the case of high integration of renewable energy sources into the electric grid. Hence, this system could support in elevating the economics of NPPs in current competitive markets, especially with subsidized solar and wind energy sources, and relatively low oil and gas prices. Furthermore, utilizing a prismatic-core advanced high temperature reactor (PAHTR) cooled by a molten salt with a high melting point, have the potential in increasing the system efficiency due to its high operating temperature, and providing the baseline requirements for coupling other process heat applications. The present research studies the neutronics and thermal hydraulics (TH) of the PAHTR as well as TH calculations for the TES which consists of 300 blocks with a total heat storage capacity of 150 MWd. SERPENT Monte Carlo and MCNP5 codes carried out the neutronics analysis of the PAHTR which is sized to have a 5-year refueling cycle and rated power of 300 MW_th. The PAHTR has 10 metric tons of heavy metal with 19.75 wt% enriched UO₂ TRISO fuel, a hot clean excess reactivity and shutdown margin of $33.70 and -$115.68; respectively, negative temperature feedback coefficients, and an axial flux peaking factor of 1.68. Star-CCM + code predicted the correct convective heat transfer coefficient variations for both the reactor and the storage. TH analysis results show that the flow in the primary loop (in the reactor and TES) remains in the developing mixed convection regime while it reaches a fully developed flow in the secondary loop.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권4호
• /
• pp.412-418
• /
• 2008

Bone morphogenetic proteins (BMPs) in combination with stem cells gain more significance for their use in bone tissue engineering. The mesenchymal stem cell can be differentiated into osteoblast by the treatment of BMP. The aim of this study is to characterize the osteogenic differentiation process of adult stem cells derived from buccal fat pad according to BMP-2 within culture media and decide the appropriate concentration of BMP-2 to facilitate osteogenesis. The authors procured the stem cell from buccal fat pad and analyzed for presence of stem cell by flow cytomety against CD-34, CD-105 and STRO-1. The buccal fat derived stem cells (BFDC) were treated by application of the different concentration with BMP-2 of 0, 10, 50, 100 and 200ng/ml, respectively. And their ability to differentiate into osteogenic pathway were checked by alkaline phosphatase(ALP) staining, Alizarin red staining and RT-PCR for osteocalcin(OC) gene expression at 7, 14 and 21day of culture. Flow cytometric analysis and biochemical assays demonstrated that BFDC might be a distinguished stem cells, and mineralization was accompanied in proportion to BMP-2 concentration. However, with 100ng/ml concentration of BMP-2, the BFDC demonstrated most efficient staining pattern of ALP and Alizarin red. The feasibility of the osteogenic differentiation in the group of both 50ng/ml and 200ng/ml of BMP-2 showed similar activity and relatively weaker than that of 100ng/ml. These results suggest that the BMP-2 stimulate osteogenesis by BFDC effectively and that bone induction might be controlled through negative regulatory feedback in higher concentration.

• 문화기술의 융합
• /
• 제6권1호
• /
• pp.507-513
• /
• 2020

본 논문에서 우리는 단일보드 컴퓨터인 라즈베리 파이3 기반의 오픈 플랫폼 로봇 Q.bo one을 이용하여 맞벌이 가정의 아이들의 생활 습관과 영어회화 교육을 케어해줄 로봇을 설계 및 구현하고자 한다. 첫 번째 생활습관 형성 기능은 성장기 아이들에게 가장 중요한 생활습관인 손씻기, 규칙적인 식사, 양치질, 숙제, 규칙적인 수면 총 5가지를 선정하여 부모가 부재중일 때에도 로봇으로 부모 목소리를 출력함으로서 아이에게 생활습관이 자리 잡을 수 있도록 도와준다. 알림을 듣고 실행에 옮긴 아이의 모습을 촬영하여 부모가 확인하고 피드백을 할 수 있게 한다. 두 번째 기초회화 교육 기능은 구글의 DialogFlow를 사용하여 로봇과 아이가 간단한 영어 회화를 통해 영어를 자연스럽게 익힐 수 있도록 도와준다. 이 두 가지 기능의 로봇을 통해 맞벌이 가정의 아이들이 부모님이 집에 계시지 않을 때에도 부모님의 목소리를 출력하는 알림으로 안정감을 느끼게 한다. 동시에 기본적인 생활 습관을 들이고, 로봇과의 기초 영어회화를 하며 일찍이 영어에 흥미를 느낄 수 있도록 하는 것이 목적이다.

• Advances in aircraft and spacecraft science
• /
• 제4권2호
• /
• pp.145-167
• /
• 2017

The presented paper gives an overview of several projects addressing the experimental characterization and control of the buffet phenomenon on 3D turbulent wings in transonic flow conditions. This aerodynamic instability induces strong wall pressure fluctuations and therefore limits flight domain. Consequently, to enlarge the latter but also to provide more flexibility during the design phase, it is interesting to try to delay the buffet onset. This paper summarizes the main investigations leading to the achievement of open and closed-loop buffet control and its experimental demonstration. Several wind tunnel tests campaigns, performed on a 3D half wing/fuselage body, enabled to characterize the buffet aerodynamic instability and to study the efficiency of innovative fluidic control devices designed and manufactured by ONERA. The analysis of the open-loop databases demonstrated the effects on the usual buffet characteristics, especially on the shock location and the separation areas on the wing suction side. Using these results, a closed-loop control methodology based on a quasi-steady approach was defined and several architectures were tested for various parameters such as the input signal, the objective function, the tuning of the feedback gain. All closed-loop methods were implemented on a dSPACE device able to estimate in real time the fluidic actuators command calculated mainly from the unsteady pressure sensors data. The efficiency of delaying the buffet onset or limiting its effects was demonstrated using the quasi-steady closed-loop approach and tested in both research and industrial wind tunnel environments.

• 한국산학기술학회논문지
• /
• 제21권6호
• /
• pp.482-489
• /
• 2020

본 연구의 목적은 소비자 및 현장의 니즈에 부합하면서 다이캐스팅으로 생산할 수 있는 커플링 부품을 개발하고자 하였으며, 유동 및 응고해석을 기반으로 다이캐스팅 금형 설계, 제작, 및 사출조건 최적화 도출을 실시하였고 사출된 제품의 측정 및 평가를 수행하였다. 유동해석을 통하여 캐비티 내부가 100 % 충진되기 위한 적정한 사출조건은 용탕의 온도 670 ℃, 사출속도 1.164 m/s, 충진압력 6.324~18.77 MPa로 분석되었다. 또한, 응고율이 69.47 %일 때 4개의 캐비티 모두에서 100 %에 근접하는 응고가 발생됨을 알 수 있었으며, 이를 기초로 시사출 조건설정 등에 응용하였으며 그 결과 사이클 타임은 약 6.5초로 도출되었다. 다이캐스팅으로 시사출된 제품의 표면 및 내부의 품질 검사를 수행한 결과 성형불량 및 기공 등의 결함은 전혀 발견되지 않았으며, 주요 개소의 치수를 측정한 결과 모든 항목에서 허용하는 공차 이내의 값을 보였다. 또한, 게이트로부터 약 45 mm 이격된 곳의 평균 경도값은 97.7(Hv)로 나타나는 등 전체적으로 양호한 치수 및 품질의 부품을 제작할 수 있었다.

• 한국정보과학회논문지:시스템및이론
• /
• 제32권5호
• /
• pp.219-231
• /
• 2005

많은 Application이 QoS(Quality of Service)를 요구한다. 본 논문에서는 시스템 에어리어 네트?에서 QoS의 일종인 성능 예측성에 촛점을 맞춘다. 예측성을 만족시키기 위해 네트?상의 모든 통신 스트림이 정적으로 스케줄된다고 가정할 때, 각 네트웍 인터페이스는 정해진 스케줄을 제 때에 실행하여야 하며 이를 위해서는 각 인터페이스의 시간베이스가 모두 동기화 되어야 한다. 본 논문에서는 이 동기화 문제를 다루었다. 동기화 문제를 해결하기 위해서, 본 논문에서는 링크 레벨 흐름 제어 신호를 이용해서 기 제안된 FM-QoS(1) 기법을 확장하였다. FM-QoS는 네트웍이 하나의 스위치로만 구성될 때 가능한 동기화 기법이다. 본 논문에서는 임의의 망구조에서 1) 네트? 인터페이스들이 동기화되기 위한 흐름 제어신호의 조건 (동기화 스케줄로 칭함)을 규정하고, 2) 동기화 스케줄의 정확도를 분석하였다. 제안한 방식의 실례를 보이기 위해서, 하나의 스위치로 구성된 네트월과 여러 개의 스위치로 구성된 트리 구조 네트웍에서 각기 동기화 스케줄을 예시하고 이의 정확도를 수치적으로 분석하였다. 분석된 정확도가 실제 시스템에서 어느 정도의 값을 갖는지를 이해하기 위해서, Myrinet 스위치(2)로 구성된 망에 대해서 실험하였다. 실험 중 관찰된 최대 정확도의 에러는 9.2 마이크로 세컨드이며, 이 수치를 바탕으로 본 논문은 제안한 동기화 알고리즘이 시스템 에어리어 네트웍에서 효과적이라고 결론지었다.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.522-532
• /
• 2006

It is well known that screech tones of supersonic jet are generated by a feedback loop driven by the instability waves. Near the nozzle lip where the supersonic jet mixing layer is receptive to external excitation, acoustic disturbances impinging on this area excite the instability waves. This fact implies that the nozzle lip thickness can influence the screech tones of supersonic jet. The objective of the present study is to experimentally investigate the effect of nozzle-lip thickness on screech tones of supersonic jets issuing from a convergent-divergent nozzle. A baffle plate was installed at the nozzle exit to change the nozzle-lip thickness. Detailed acoustic measurement and flow visualization were made to specify the screech tones. The results obtained obviously show that nozzle-lip thickness significantly affects the screech tones of supersonic jet, strongly depending on whether the jet at the nozzle exit is over-expanded or under-expanded.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.196-201
• /
• 2004

In biometric and biomedical applications, a special transporting mechanism must be designed for the ${\mu}$TAS (micro total analysis system) to move samples and reagents through the microchannels that connect the unit procedure components in the system. An important issue for this miniaturization and integration is microfluid management technique, i.e., microfluid transportation, metering, and mixing. In view of this, this study presents an optimal fuzzy sliding-mode control (OFSMC) design based on the 8051 microprocessor and implementation of a complete microfluidic manipulated system implementation of biochip system with a pneumatic pumping actuator, a feedback-signal photodiodes and flowmeter. The new microfluid management technique successfully improved the efficiency of molecular biology reaction by increasing the velocity of the target nucleic acid molecules, which increases the effective collision into the probe molecules as the target molecules flow back and forth. Therefore, this hybridization chip was able to increase hybridization signal 6-fold and reduce non-specific target-probe binding and background noises within 30 minutes, as compared to conventional hybridization methods, which may take from 4 hours to overnight. In addition, the new technique was also used in DNA extraction. When serum existed in the fluid, the extraction efficiency of immobilized beads with solution flowing back and forth was 88-fold higher than that of free-beads.

• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.398-413
• /
• 2016

This work describes the design and development of a new drying system for a rollover carwash machine with the support of numerical tools. The drying system is composed of a pair of stationary vertical dryers and a moveable horizontal dryer that can adjust itself to the contour of a vehicle. After the definition of the dryers' concept, their performance was assessed individually to check their internal flow pattern and to improve their airflow distribution. These issues are expected to provide feedback on redesign and geometric optimization of the dryers. After redesign of the dryers separately, the behaviour of the complete drying system was studied on actual vehicle models, representative of the shortest and tallest dimensions that can be washed with the existing carwash machine sector. The drying efficiency of the whole system was studied by calculation of shear stress distribution on various surfaces of a given vehicle. The results allowed concluding that the overall drying performance of the design system is very good and assure adequate drying on most vehicles surfaces. The results obtained from numerical studies were then validated with experimental measurements and a good agreement was found between the two. The procedure employed in this work can be applied to support the design and analysis of other mechanical drying systems.