• Korean journal of food and cookery science
• /
• v.13 no.5
• /
• pp.592-601
• /
• 1997

The purposes of this study were to develop Hazard Analysis Critical Control Point-based standardized recipe applicable to cook/chilled soy sauceglazed mackerel and to evaluate the qualities related to the product flow of this item. After conducting experimental cooking, preliminary test, and analysis of recipes, critical control points were identified, control methods were determined, and HACCP-based recipe was standardized. At each critical control point, time-temperature profile was recorded and microbiological analysis (total aerobic plate counts, psychrotrophic plate count, coliform, and fecal coliform count), chemical analysis (pH, acid value and volatile based nitrogen (VBN)) and sensory evaluation of the item were done. Time-temperature data showed that the time the menu item had passed through temperature danger zone (5∼60$^{\circ}C$) during all phases was 60 min. At rapid cooling, but after cooling at room temperature, the temperature of this menu item did not drop below the ambient temperature. The results of microbiological test were negative throughout all phases following cooking and the results of chemical analysis did not change significantly in terms of storage periods except for VBN which increased on 7th day significantly(p<0.05). After steam/convection oven reheating and microwave oven reheating, the sensory score of the only appearance decreased significantly related to the storage time of overall quality profiles. But significant differences were not detected according to two reheating methods. In conclusion, this HACCP-based recipe was considered as an effective tool for assuring microbial as well as sensory quality of this cook/chilled item.

• Journal of the Economic Geographical Society of Korea
• /
• v.4 no.2
• /
• pp.79-96
• /
• 2001

This paper introduces a new type of industrial cluster developed at the CBD of Seoul. Conventionally, clusters are said to be consisted of hi-tech, often If activities, manufacturing industries or artisan craft industries with increasing vertical integration and performance usually supported by venture capitals and favorable business infrastructure, not to mention governments', be it central or local, incentive plans. The study area, Cheonggyechon region has long been a traditional CBD frame of Seoul, Korea, being troubled by deterioration, traffic jams, and environmental degradation as most inner cities experience. Recently. this region has transformed to the most dynamic and productive area not by IT industries but by apparel and fashion activities. The study of the developmental trajectory and key characteristics for this kind of industrial cluster can give us insight both for the transition of inner city and for the cluster theory. This Paper firstly briefly Profiles the growth of the Cheonggyechon region over the past decade. It then shows the current spatial and business structure of the new industrial cluster, focusing on the fact that transactions costs are reduced, the creation and flow of information improves. and the local institutions are prone to be most responsive to the new cluster's specialized needs. The third section presents the key components of the customized production-distribution-shopping cluster development process, emphasizing the localized networking. social capital, spontaneous institutionalization of associational economic climate, and cultural economy based on place-specific inertia. The paper concludes with some comments about the prospects and perils of the new industrial cluster of Seoul.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.6
• /
• pp.698-706
• /
• 2020

Objective : To study the physiochemical characteristics of podophyllotoxin (PPT) conjugated stearic acid grafted chitosan oligosaccharide micelle (PPT-CSO-SA), and evaluate the ability of the potential antineoplastic effects against glioma cells. Methods : PPT-CSO-SA was prepared by a dialysis method. The quality of PPT-CSO-SA including micellar size, zeta potential, drug encapsulation efficiency and drug release profiles was evaluated. Glioma cells were cultured and treated with PPT and PPT-CSO-SA. The ability of glioma cells to uptake PPT-CSO-SA was observed. The proliferation of glioma cells was determined by 3-[4, 5-dimethyl-2-thiazolyl]-2, 5-diphenyl-2H-tetrazolium bromide (MTT) assay. The apoptosis and morphology of U251 cells were observed by 4',6-Diamidino-2-phenylindole dihydrochloride (DAPI) dye staining. Cell cycle analysis was performed by flow cytometry. The migration ability of U251 cells was determined by wound healing test. Results : PPT-CSO-SA had nano-level particle size and sustained release property. The encapsulation efficiency of drug reached a high level. The cellular uptake percentage of PPT in glioma cells was lower than that of PPT-CSO-SA (p<0.05). The inhibitory effect of PPT-CSO-SA on glioma cells proliferation was significantly stronger than that of PPT (p<0.05). The morphologic change of apoptosis cell such as shrinkage, karyorrhexis and karyopyknosis were observed. The percentage of U251 cells in G2/M phase increased significantly in the PPT-CSO-SA group compared with PPT group (p<0.05). Compared with the PPT group, the cell migration ability of the PPT-CSO-SA group was significantly inhibited after 12 and 24 hours (p<0.05). Conclusion : PPT-CSO-SA can effectively enhance the glioma cellular uptake of drugs, inhibit glioma cells proliferation and migration, induce G2/M phase arrest of them, and promote their apoptosis. It may be a promising anti-glioma nano-drug.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.11
• /
• pp.1971-1982
• /
• 2017

Piliated Lactobacillus rhamnosus (pLR) strains possess higher adherent capacity than non-piliated strains. The objective of this study was to isolate and characterize probiotic pLR strains in human fecal samples. To this end, mouse polyclonal antiserum (anti-SpaA) against the recombinant pilus protein (SpaA) of L. rhamnosus strain GG (LGG) was prepared and tested for its reactivity and specificity. With the anti-SpaA, a method combining the de Man, Rogosa, and Sharpe (MRS) agar plating separation and colony immunoblotting (CIB) was developed to isolate pLR from 124 human fecal samples. The genetic and phenotypic characteristics of the resultant pLR isolates were compared by randomly amplified polymorphic DNA (RAPD) fingerprinting, and examination of adhesion to Caco-2 cells, hydrophobicity, autoaggregation, and in vitro gastrointestinal tolerance. Anti-SpaA specifically reacted with three pLR strains of 25 test strains, as assessed by western blotting, immunofluorescence flow cytometry, and immunoelectron microscopy (IEM) assays. The optimized MRS agar separation plus anti-SpaA-based CIB procedure could quantitatively detect $2.5{\times}10^3CFU/ml$ of pLR colonies spiked in $10^6CFU/ml$ of background bacteria. Eight pLR strains were identified in 124 human fecal samples, and were confirmed by 16S RNA gene sequencing and IEM identification. RAPD fingerprinting of the pLR strains revealed seven different patterns, of which only two isolates from infants showed the same RAPD profiles with LGG. Strain PLR06 was obtained with high adhesion and autoaggregation activities, hydrophobicity, and gastrointestinal tolerance. Anti-SpaA-based CIB is a rapid and inexpensive method for the preliminary screening of novel adherent L. rhamnosus strains for commercial purposes.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.2
• /
• pp.117-123
• /
• 2010

Ibudilast, 3-isobutyryl-2-isopropyrazolo[1,5-a]pyridine, is a nonselective inhibitor of cyclic nucleotide phosphodiesterase (PDE). It preferentially inhibits PDE 3A, PDE4, PDE10 and PDE11 as well as a number of the other PDE families, albeit to a lesser extent. Ibudilast is used clinically to treat bronchial asthma and cerebrovascular disorders. Thes e clinical uses are based on the ability of ibudilast to inhibit platelet aggregation, improve cerebral blood flow and attenuate allergic reactions. The purpose of the present study was to evaluate the bioequivalence of two ibudilast capsules, Ketas capsule (Handok Pharmaceuticals Co., Ltd.) and Pinatos capsule (Sam Chun Dang Pharm. Co., Ltd.), according to the guidelines of the Korea Food and Drug Administration (KFDA). The in vitro release of ibudilast from the two ibudilast formulations was tested using KP Apparatus method with various dissolution media. Twenty six healthy male subjects, 23.31${\pm}$1.09 years in age and 70.45${\pm}$8.51 kg in body weight, were divided into two groups and a randomized $2{\times}2$ cross-over study was employed. After a single capsule containing 10 mg as ibudilast was orally administered, blood samples were taken at predetermined time intervals and the concentrations of ibudilast in serum were determined using HPLC/UV detector. The dissolution profiles of two formulations were similar in all tested dissolution media. The pharmacokinetic parameters such as $AUC_t$, $C_{max}$ and $T_{max}$ were calculated, and computer programs (Equiv Test and K-BE Test 2002) were utilized for the statistical analysis of the parameters using logarithmically transformed $AUC_t$, $C_{max}$ and untransformed $T_{max}$. The results showed that the differences between two formulations based on the reference drug, Ketas, were 6.99%, -2.48% and 9.93% for $AUC_t$, $C_{max}$ and $T_{max}$, respectively. There were no sequence effects between two formulations in these parameters. The 90% confidence intervals using logarithmically transformed data were within the acceptance range of log 0.8 to log 1.25 (e.g., log 0.8791~log 1.1861 and log 0.8347~log 1.1199 for $AUC_t$ and $C_{max}$, respectively). Thus, the criteria of the KFDA bioequivalence guideline were satisfied, indicating Pinatos capsule was bioequivalent to Ketas capsule.

• Restorative Dentistry and Endodontics
• /
• v.36 no.5
• /
• pp.377-384
• /
• 2011

Objectives: The purpose of this study was to observe the change in the viscoelastic properties of thermoplasticized injectable root canal filling materials as a function of temperature and to compare the handling characteristics of these materials. Materials and Methods: Three commercial gutta perchas and Resilon (Pentron Clinical Technologies) in a pellet form were heated in the Obtura-II system (Obtura Spartan) at $140^{\circ}C$ and $200^{\circ}C$, and the extrusion temperature of the thermoplasticized materials was measured. The viscoelastic properties of the materials as a function of temperature were evaluated using a rheometer. The elastic modulus G', viscous modulus G", loss tangent tan${\delta}$, and complex viscosity ${\eta}^*$ were determined. The phase transition temperature was determined by both the rheometer and a differential scanning calorimeter (DSC). The consistency of the materials was compared under compacting pressure at $60^{\circ}C$ and $40^{\circ}C$ by a squeeze test. Results: The three gutta perchas had dissimilar profiles in viscoelastic properties with varying temperature. The phase transition of softened materials into solidification occurred at $40^{\circ}C$ to $50^{\circ}C$, and the onset temperatures obtained by a rheometer and a DSC were similar to each other. The onset temperature of phase transition and the consistency upon compaction pressure were different among the materials (p < 0.05). Resilon had a rheologically similar pattern to the gutta perchas, and was featured between high and low-flow gutta perchas. Conclusions: The rheological characteristics of the thermoplasticized root canal filling materials changed under a cooling process. The dissimilar viscoelastic properties among the materials require different handling characteristics during an injecting and compacting procedure.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.83-89
• /
• 1984

In order to study the feasibility of industrial application of Kimchi juice separation-pasteurization method, a pilot scale Kimchi pasteurizer was designed and fabricated. The apparatus consisted of five sections: Kimchi juice separation-mixing, holding, precooling and cooling sections. Stainless steel pipelengths required for the heat exchanging sections were determined based on an equation, $W{\;}C_p{\;}T{\;}={\;}U(2{\;}RL){\;}T_{1m}$. Overall heat transfer coefficients in preheating, holding, precooling and cooling sections were 875, 1398, 2036, and $288{\;}kcal/m^2h^{\circ}C$ at the flow rate of 4 l/min, respectively, and temperature profiles of each section were in good agreement with those predicted from design criteria. A preliminary test using Chinese radish Kimchi demonstrated that this method can effectively be used in commercial processing of kimchi.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.65-72
• /
• 1993

A numerical method for nonlinear free-surface-wave problem is developed in this paper. The final goal of this study is to simulate the towing tank experiment of a ship model and to partially replace the experiment by the numerical model. The exact problem in the scope of potential flow theory is formulated by a variational principle based on the classical Hamilton's principle. A localized finite element method is used in the present numerical computations which made use of the following two notable steps. The first step is an efficient treatment of the numerical radiation condition by using the intermediate nonlinear-to-linear transition buffer subdomain between the fully nonlinear and linear subdomains. The second is the use of a modal analysis in the final stage of the solution procedures, which enables us to reduce the computation time drastically. With these improvements the present method can treat a much larger computational domain than that was possible previously. A pressure patch on the free surface was chosen as an example. From the present computed results we could investigate the effect of nonlinearity on the down-stream wave pattern more clearly than others, because much larger computational domain was treated. We found, specifically, the widening of the Kelvin angle and the increase of the wave numbers and the magnitude of wave profiles.

• Journal of the Korean Geophysical Society
• /
• v.3 no.2
• /
• pp.113-126
• /
• 2000

We have conducted multiple geophysical surveys to investigate the geoenvironmental change of the Nanjido Landfill due to the stabilization process. Geophyscial surveys are comprized of gravity, magnetic, dipole-dipole electrical and SP methods. Due to the field conditions, surveys were conducted on the top surface of the landfill no.2 and southern border areas in front of landfills. The gravity anomalies obtained on the top surface of the landfill no.2 in 1999 show that the gradient of the anomaly on the central area is decreasing in comparison with that observed four years ago. The complexity of magnetic anomaly pattern it also decreasing. These facts suggest that the stabilization work of the Nanjido landfill makes some progress by compaction process due to repetitive subsidence and refilling. The dipole-dipole electrical resistivity and SP data obtained on the outside of the waterproof wall at the landfill no.1 were severely affected by unsatisfactory surface conditions. On the other hand, the dipole-dipole electrical resistivity profiles obtained on the inside and outside parts of the waterproof wall at the landfill no.2 show the blocking effect of leachate flow by the waterproof wall. Few SP anomalies are observed on the top and side surfaces of the landfill no.2, but SP anomalies obtained on the base area inside the waterproof wall strongly reflect the effect of leachate collecting wells.

• Geophysics and Geophysical Exploration
• /
• v.9 no.3
• /
• pp.225-230
• /
• 2006

Fluid replacement and conductivity logging have been applied to three boreholes in coastal aquifer in order to identify permeable fractures and to estimate the origin of saline groundwater. Fluid replacement technique measures and monitors the change of borehole fluid conductivity with depth under ambient or pumping condition after replacing the original borehole fluid with different one (by pumping out original one and injecting simultaneously new one at the hole bottom). After the replacement of borehole fluid, the change of fluid conductivity can be the direct indicator of the intake flow of formation water through aquifer such as permeable fractures or porous formations. The conductivity profiles measured with times therefore indicate the locations of permeable zone or fractures within the open hole or the fully slotted casing hole. As a result of fluid conductivity logging for three boreholes at coastal area in Yeonggwang, Jeonam Province, it is interpreted that the seawater intrusion in this area is not by remnant saline groundwater after land reclamation but mainly by intrusion of saline water through fractured rock. This approach might be useful for assessing the characteristics of seawater intrusion, the design of optimal pumping, the mitigation of seawater intrusion using freshwater injection, and estimating the hydraulic characteristics in coastal aquifer.