• 상하수도학회지
• /
• 제25권2호
• /
• pp.185-192
• /
• 2011

Pearson's correlation was used to determine relations between infiltration and affecting factors using flow monitoring data measured in 24 areas with different characteristics. Factors showed relatively high correlations than others were indexed to determine infiltration rates of the study area. Among 8 factors(service area, sewer length, sewer diameter, multiplier of sewer length and diameter, number of manholes, population, number of properties, number of households) tested, the multiplier of sewer length and diameter, the number of population and the number of household in each service area indicated higher correlation coefficient(>0.8) than others. The goodness of fitness of linear regressions between infiltration and the factors followed the order: sewer length and diameter(0.68)> population(0.65)> number of household(0.60). Infiltration rates calculated by the multiplier of sewer length and diameter, the number of population and the number of household in each service area were 0.046~1.0396 $m^{3}/d{\cdot}mm-km$, 0.0917~1.7355 $m^{3}/capita{\cdot}d$, 0.196~4.529 $m^{3}/household {\cdot}d$ respectively. After sewerage rehabilitation work of the area, the infiltration rates calculated by above factors with high correlations are expected to be used for comparing effectiveness of the work once they are estimated under the same flow measuring conditions.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권3호
• /
• pp.156-165
• /
• 2004

Concentrations of substrates, glucose, and ammionia in biological processes have been on-line monitored by using glucose-flow injection (FIA) and ammonia-FIA systems. Based on the on-line monitored data the concentrations of substrates have been controlled by an on-off controller, a PID controller, and a neural network (NN) based controller. A simulation program has been developed to test the control quality of each controller and to estimate the control parameters. The on-off controller often produced high oscillations at the set point due to its low robustness. The control quality of a PID controller could have been improved by a high analysis frequency and by a short residence time of sample in a FIA system. A NN-based controller with 3 layers has been developed, and a 3(input)-2(hidden)-1(output) network structure has been found to be optimal for the NN-based controller. The performance of the three controllers has been tested in a simulated process as well as in a cultivation process of Saccharomyces cerevisiae, and the performance has also been compared to simulation results. The NN-based controller with the 3-2-1 network structure was robust and stable against some disturbances, such as a sudden injection of distilled water into a biological process.

• 한국멀티미디어학회논문지
• /
• 제18권1호
• /
• pp.35-41
• /
• 2015

SDN(Software Defined Networking) has been considered as a new future computer network architecture and DDoS(Distributed Denial of Service) is the biggest threat in the network security. In SDN architecture, we present the technique to defend the DDoS SYN Flooding attack that is one of the DDoS attack method. First, we monitor the Backlog queue in order to reduce the unnecessary monitoring resources. If the Backlog queue of the certain server is occupied over 70%, the sFlow performs packet sampling with the server address as the destination address. To distinguish between the attacker and the normal user, we use the source address. We decide the SYN packet threshold using the remaining Backlog queue that possible to allow the number of connections. If certain sources address send the SYN packet over the threshold, we judge that this address is attacker. The controller will modify the flow table entry to block attack traffics. By using this method, we reduce the resource consumption about the unnecessary monitoring and the protection range is expanded to all switches. The result achieved from our experiment show that we can prevent the SYN Flooding attack before the Backlog queue is fully occupied.

• 방사성폐기물학회지
• /
• 제14권1호
• /
• pp.35-44
• /
• 2016

Leading national R&D project to design a PWR spent nuclear fuel interim dry storage system that has been under development since mid-2009, which consists of a dual purpose metal cask and concrete storage cask. To ensure the safe operation of dry storage systems in foreign countries, major confinement monitoring techniques currently consist of pressure and temperature measurement. In the case of a dual purpose metal cask, a pressure sensor is installed in the interspace of bolted double lid(primary and secondary lid) in order to measure pressure. A concrete storage cask is a canister based system made of double/redundant welded lid to ensure confinement integrity. For this reason, confinement monitoring method is real time temperature measurement by thermocouple placed in the air flow(air intake and exit) of the concrete structure(over pack and module). The use of various monitoring technologies and operating experiences for the interim dry storage system over the last decades in foreign countries were analyzed. On the basis of the analysis above, development of the confinement monitoring technology that can be used optimally in our system will be available in the near future.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.503-504
• /
• 2017

최근 세계 각국의 경제적 성장과 함께 건강한 삶에 대한 관심이 증가하고 있으며, 이에 따른 스마트헬스케어 산업이 활성화 되고 있다. 스마트헬스케어 분야에서는 IoT기술의 부각에 따라 웨어러블 형태의 생체정보 계측기술이 부각되고 있다. 본 연구에서는 웨어러블 헬스케어에 응용이 가능하고 활동 중에도 편리하게 심박동의 모니터링을 수행 할 수 있는 장갑형태의 착용형 심박동 모니터링시스템을 구현하고자 하였다. 이를 위해 손가락 말초에서의 혈류량변화를 모니터링하고 디스플레이 할 수 있는 장갑형 웨어러블 헬스케어시스템을 제작하고 그 성능평가를 수행하였다. 실험결과 실제 일상생활 중 움직임을 수반하더라도 심박동의 모니터링이 가능함을 확인할 수 있었다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.107-112
• /
• 2004

Corresponding to the importance of real-time position tracing in the customs free zone, the logistics monitoring system utilizing GPS and PDA correctly confirms the position of the logistics at real time. Information obtained through the use of bluetooth is transmitted into the control station that controls the flow of the logistics. This logistics monitoring system can efficiently identify the movement of the logistics all the time.

• Environmental Engineering Research
• /
• 제13권4호
• /
• pp.184-191
• /
• 2008

Long term monitoring was conducted to investigate a surface runoff of pollution from urban highway. The monitoring data was collected for 18 rainfall events and was used to correlate pollution load to various parameters, such as rainfall intensity, antecedent dry days and total discharge flow. Runoff coefficient and seasonal variation were also evaluated. The mean runoff coefficient of the highway was 0.823(range; $0.4687{\sim}0.9884$), and wash-off ratio for $COD_{Mn}$ and SS loads was 72.6% and 64.3%, respectively. For the initial rainfall event, the runoff EMC of $COD_{Mn}$ was high in summer and the EMC of SS was high in autumn season. However the seasonal variation of T-N and T-P was not significant. The discharged $COD_{Mn}$-EMC was $147.6\;mg/L{\sim}9.0\;mg/L$ on the generated $COD_{Mn}$-EMC of $98.8\;mg/L{\sim}8.9\;mg/L$. While the generated EMC of SS was in $285.7\;mg/L{\sim}20.0\;mg/L$ and its discharged EMC was in $190.4\;mg/L{\sim}8.0\;mg/L$. EMC of pollutants was not directly related to the first flush rainfall intensity and the antecedent dry days. But the correlation was relatively high between EMC and cumulative runoff flow volume. The trend of EMC was reduced with the cumulative runoff flow volume.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1505-1515
• /
• 2009

A new method to semicontinuously determine $PM_{2.5}$ ionic species with a short time resolution is described in detail. In this system, a particle collection section (mixing part, particle collection chamber, and air/liquid separator) was developed. A Y-type connector was used to mix steam and an air sample. The particle collection chamber was constructed in the form of a helix coil and was cooled by a water circulation system. Particle size growth occurred due to the high relative humidity and water absorbed particles were efficiently collected in it. Liquid samples were drained out with a short residence time (0.08-0.1 s). The air/liquid separator was also newly designed to operate efficiently when the flow rate of the air sample was 16.7 L $min^{-1}$. For better performance, the system was optimized for particle collection efficiency with various types of test aerosols such as ($NH_4)_2SO_4,\;NaCl,\;NH_4HSO_4,\;and\;NH_4NO_3$. The particle collection efficiencies were almost 100% at different concentration levels in the range over 500 nm in diameter but 50-90% in the range of 50-500 nm under the following experimental conditions: 15 coil turns, a water flow rate for steam generation of 0.65 mL $min^{-1}$, and an air sample flow rate of 16.7 L $min^{-1}$. Finally, for atmospheric applications, chemical compositions of $PM_{2.5}$ were determined with a time resolution of 20 min on January 11-24, 2006 in Seoul, Korea, and the chemical characteristics of $PM_{2.5}$ ions were investigated.

• 한국수자원학회논문집
• /
• 제38권1호
• /
• pp.73-82
• /
• 2005

국내산지사면의 토양수분 시공간적 분포상황을 파악하기 위한 토양수분 측정법을 개발하였다. 대상유역을 정밀 측량하여 수치고도모형을 구성한 다음 흐름분배 알고리즘을 적용하였고 역측랑을 통한 대상 유역의 흐름분배 알고리즘의 유의성을 판단하였다. 이를 통한 공간적 변화의 대표성을 최대화하기 위한 장기 모니터링 시스템을 구축하였으며, 토양수분의 정확한 측정을 위해 TDR(Time Domain Reflectometry)을 이용하였다. 측정은 설마천 유역의 범륜사 우측사면에서 수행되었다. 강우사상에 의한 시공간적 토양수분의 변화 자료를 성공적으로 획득하였다. 획득된 토양수분자료는 측정시스템의 효용성과 사면유출의 과정에 대한 물리적인 과정을 나타낸다. 불연속적인 토양수분의 연직분포 양상은 사면 수문과정에서 선행흐름이나 대공극 흐름의 중요성을 의미한다.

• 한국지능시스템학회논문지
• /
• 제27권1호
• /
• pp.35-41
• /
• 2017

본 연구는 모델기반설계 기법을 이용하여 자동차 클러스터의 감시 및 제어를 하는 스테이션을 설계한다. 설계 도구로 매트랩 GUI(Graphic User Interface), M 프로그램, 시뮬링크(simulink), 스테이트 플로우(state flow), 툴박스(tool box)를 사용하여 실제 자동차 클러스터 시스템과 연동하여 자동차에서 들어오는 경고, 인터럽트 등의 각종 정보 등을 감시한다. 감시 수단으로는 PC(Personal Computer) 스테이션을 사용하여 자동차 클러스터 설계 시 툴 박스의 인터페이스 명령함수가 실제 자동차 클러스터 시스템과 연동하게 한다. 따라서, 기존의 텍스트 방식과 달리 모델기반설계로 개발된 자동차 클러스터 시스템은 각 기능 및 알고리즘을 블록과 상태플로우로 프로그램에 따라 작성하기 때문에 알고리즘의 수정이나 기능 추가가 용이하며, 또한, PC를 통해 모니터 상에서 동작 알고리즘을 검증하기 때문에 클러스터의 개발과 수정에 따른 많은 시간과 비용을 절감할 수 있는 효과를 준다.