• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.304-307
• /
• 2008

Two-dimensional Stokes flow due to the line source and line sink of same strength in semi-infinite flow region with free surface is analysed using complex variable theory and conformal mapping. Surface tension effects are included while gravity is neglected. From the results of analysis, flow pattern and free surface shape are obtained and velocity distribution on the free surface is determined with 2 independent parameters Ca (capillary number) and h (non-dimensionalized distance between source and sink). When the location of the sink is above the source, velocity on the free surface converges and a cusp occurs on the free surface for the value of Ca above some critical capillary number.

• 대한의용생체공학회:의공학회지
• /
• 제16권3호
• /
• pp.279-288
• /
• 1995

Ultrasonic Doppler systems for the purpose of estimating blood flow velocity, blood flow volume, and flow imaging are commonly used due to advantages of non-invasive and real time observation. Specially, the technical developments of color flow mapping (2-D Doppler) systems have made a relatively rapid progress. However, the 2-D Doppler systems have several problems, such as the range ambiguity, low signal to noise ratio, and slow frame rate. The slow frame rate problem is resolved by using the spatial average which is a method to acquire more data samples for mean frequency estimation. In this paper, spatial average method using the 2nd order sampling instead of quadrature sampling is proposed. The experimental results show that the proposed methods have good performance and easy application to the color flow mapping system.

• 설비공학논문집
• /
• 제14권3호
• /
• pp.254-260
• /
• 2002

There have been many studies for the flow through internally finned tube, since the heat exchangers with fin device derive much attention in heat transfer enhance cent. In this study, analysis of laminar flow through the circular tube with longitudinal fins are investigated. The height and the number of fins are arbitrary. The flow field is assumed to be laminar and conformal mapping is used to obtain analytic solution. From the analytic solution, equi-velocity lines are shown, and the flow rate through the finned tube is calculated for various fin heights and numbers of fins. Darcy friction factor for this finned tube and shear stress distributions on the wall and fin are also considered.

• 한국전산유체공학회지
• /
• 제9권4호
• /
• pp.20-33
• /
• 2004

In this study a stretching-mapping method is proposed for calculating the materials' stretching exponents, which are to be used in quantification of the mixing effect. In this method, the mapping tensor associated with the deformation of each fluid material is first obtained. Then deformations of a lot of materials are obtained by applying the mapping tensor. The local stretching rates and their space-average values are next computed with the mapped deformations. Application to a simple time-periodic flow within a cavity shows that the method is indeed effective compared with the conventional method; i.e. the mapping method is fast and yields the same results as the conventional one.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.56.1-56.1
• /
• 2008

• 한국정보과학회논문지:정보통신
• /
• 제41권4호
• /
• pp.167-176
• /
• 2014

본 논문은 이동 환경 위주의 미래 인터넷 환경을 위해 제안된 Mobile Oriented Future Internet (MOFI) 구조에 대하여 OpenFlow 기반 구현 이슈와 KOREN 실험망을 이용한 성능 분석을 논의한다. MOFI 구조는 호스트 식별자(host identifier)와 지역 위치자(local locator) 사용, 데이터 전달을 위한 Query 우선의 데이터 전달(Query-First Data Delivery), 식별자와 위치자간 분산형 매핑 시스템(Distributed Mapping System)을 특징으로 한다. 기존 MOFI 연구에서는 intra-domain 이동성 지원을 위해 6-to-4 터널링 기법 및 리눅스 플랫폼을 활용한 구현 방식을 제안하고 실험실 테스트베드에서 성능분석을 수행하였다. 한편, 본 논문에서는 inter-domain 이동성 지원을 위한 세부 절차를 논의하고 Click Modular Router와 OpenFlow 플랫폼을 활용한 MOFI 구현 방식을 제안한다. 나아가, 실제 KOREN 실험망을 활용한 성능 실험을 통해 MOFI 구조와 기존 이동성 제어 방식인 Proxy Mobile IP (PMIP) 기법을 비교한다. 실험 결과, 이동성 제어를 위한 시그널링 지연 시간 및 처리되는 메시지 수 측면에서 MOFI 구조가 기존 PMIP 이동성 제어 기법에 비하여 더 좋은 성능을 보이고 있음을 확인하였다.

• 한국해양공학회지
• /
• 제35권3호
• /
• pp.183-190
• /
• 2021

Tomographic particle image velocimetry (PIV) is a widely used method that measures a three-dimensional (3D) flow field by reconstructing camera images into voxel images. In 3D measurements, the setting and calibration of the camera's mapping function significantly impact the obtained results. In this study, a camera self-calibration technique is applied to tomographic PIV to reduce the occurrence of errors arising from such functions. The measured 3D particles are superimposed on the image to create a disparity map. Camera self-calibration is performed by reflecting the error of the disparity map to the center value of the particles. Vortex ring synthetic images are generated and the developed algorithm is applied. The optimal result is obtained by applying self-calibration once when the center error is less than 1 pixel and by applying self-calibration 2-3 times when it was more than 1 pixel; the maximum recovery ratio is 96%. Further self-correlation did not improve the results. The algorithm is evaluated by performing an actual rotational flow experiment, and the optimal result was obtained when self-calibration was applied once, as shown in the virtual image result. Therefore, the developed algorithm is expected to be utilized for the performance improvement of 3D flow measurements.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.768-773
• /
• 2011

The prediction method of future events using the time histories of velocity or pressure, etc., is a useful way for controlling various air vehicles. For example, the sensors of velocity or pressure can be used to extract the time mode coefficients of eigenmode of flow field, and then the result is applied to suppress wake or drag. The velocity information is mapped to the entire flow field, so this mapping function can be used to predict the future events based on the current information. The mapping function is composed of the huge amount of weight parameters, so the efficient way of finding these parameters is needed. Here, the neural network algorithm is studied to draw a mapping function using the number and location of velocity sensors.

• Journal of Biosystems Engineering
• /
• 제24권2호
• /
• pp.135-144
• /
• 1999

An yield monitoring system plays a key role in precision farming. An yield monitoring system and a DGPS were implemented to a widely used domestic combine for yield mapping of a small sized paddy field, and yield mapping algorithms were investigated in this study. The yield variation in the 0.1ha rice paddy field was measured by installing a yield flow sensor and a grain moisture sensor at the end of the clean grain elevator discharging grains into a grain tank. Yield map of the test filed was drawn in a point map and a linear interpolated map based on the result of the field test. The size of a unit yield grid in yield mapping was determined based on the combine traveling speed, effective harvesting width and data storing period. It was possible to construct the yield map of a small sized paddy field.

• Geosciences Journal
• /
• 제22권6호
• /
• pp.891-902
• /
• 2018

Techniques for more reliable detection of 3D subsurface flow paths are highly important for most water-related geotechnical projects. In this case study, a magnetometric resistivity method with a new approach and state-of-the-art technology ("Willowstick survey") was applied to the testbed dam (YD dam) site, and its applicability was validated by geotechnical investigation techniques including borehole drilling and sampling, Lugeon test, flow direction and velocity test, and seismic tomography. In addition to the magnetometric survey, a 3D electrical resistivity survey was performed independently and the results were compared and discussed. The electrical resistivity survey was effective in detecting groundwater levels, but it was limited in mapping leakage paths. On the other hand, the Willowstick magnetometric survey effectively detected geologic weaknesses (e.g., fault fracture) and potential leakage paths of the dam site foundation rocks. The results of this research are expected to be effective for water infrastructures where leakage is an important issue.