• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.9-16
• /
• 2011

When a hydrofoil ship plies at high speed, there exist possibilities of collision with ocean mammals dwelling near the surface. An active sonar located within the immersed hydrofoil structure that provides the lift for the vessel, can be used for early warning of their presence. The proper functioning of the active sonar system depends on its ability to reject noise and pick up the target signal. In this article, we measured the noise on a hydrofoil of an operating ship with two flush-mounted hydrophones. The measurements were conducted for the purpose of (1) identifying the effect of operating state of machinery likes engine, cooler and generator (2) observing the change of noise depending on the measuring position (3) observing the change of noise with increasing ship speed. To verify our experiment, experiments were performed three times and the measured results are compared with other investigations and they show similarity to each other. The results are analyzed with frequency domain in order to apply to operating active sonar detecting system and focus on high frequency band within sonar's operating frequency region. Through these experiments and analysis, it is expected that we can identify the generated noise around hydrofoil where active sonar is installed and these results lead us to design active sonar that could distinguish target signal from noise more effectively.

• Journal of Chest Surgery
• /
• v.32 no.8
• /
• pp.693-701
• /
• 1999

Recently non-invasive diagnostic imaging replaced the invasive catheter angiography in the diagnosis of vascular disease. Catheter methods are now almost confined to the purpose of intervention. Coronary artery or coronary artery bypass graft still needs catheter technique because of small diameter and the cardiac motion. The last challenge for radiologists in this domain is to obtain a non-invasive imaging. Electron beam tomography(EBT) for high temporal resolution is able to obtain a coronary arteriogram or coronary artery bypass graft (CABG), of which CABG imaging is quite useful for the evaluation of patency. In our experience as well as others, the accuracy of EBT angiogram in evaluating CABG patency revealed that the accuracy of patency of saphenous vein grafts(SVG) is high due to relatively wide lumen, short and straight course and less influence from cardiac motion. The sensitivity and specificity of patency of SVGs were 92%, 97% respectively in the prospective evaluat on and 100% each in the retrospective evaluation. A false positive and a false negative case are rudimentary errors in the initial learing period. In contrast the analysis of left internal mammary artery(LIMA) graft was difficult due to the inherent small size and the adjacent surgical clips provoking beam-hardening artifact; therefore, the method of combining 3 dimensional reconstruction and flow mode study was important in improving the accuracy of LIMA patency. The sensitivity and specificity of LIMA patency were 100% and 80% in both prospective and retrospective evaluation. Therefore, EBT angiography is an accurate non-invasive diagnostic modality for evaluating the patency of CABG, particularly in SVGs. The accuracy can be improved with the improvement of the EBT and the development of the image reconstruction software.

• The Journal of Engineering Geology
• /
• v.14 no.3 s.40
• /
• pp.301-311
• /
• 2004

This study is suggested a new dielectric tracer test method to understand geological structure of porous media and groundwater flow to use the dielectric constant which is one of electrical special quality of various geological materials. To measure their parameters, tracer material is made an ethanol mixing liquid(EML) having a same specific gravity of water. Also, soil materials are prepared a dielectric tracer test using the FDR system that could measure dielectric constant for saturated standard sand and river sand layers which have different initial porosity. To compare with their results, we discussed with the concentration variation of saline water having a saline concentration $3\%$ which is general tracer material by using the electro multi-meter system in the laboratory or field test. In two tracer experiment results, EML tracer test could confirm definitely EML concentration variation from each saturated soil layer as standard and river sands. However, tracer test of saline water $3\%$ concentration could not confirm permeating movement of water by degree of salinity change because these are settled at lower part column in a whole column area continuously. These causes are that specific gravity of saline water is heavier than water. That is, it could know that deposition of saline water is composed of lower part of soil column continuously independently of the direction of water into saturated soil material.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.16-22
• /
• 2010

To maintain the storage quality of agricultural products, temperature uniformity during cold storage, which is affected by fan flow rate and product arrangement, is important. We simulated and validated a CFD (Computational Fluid Dynamics) model that can predict both airflow and temperature distribution in a cold storage environment. Computations were based on a commercial code (FLUENT 6.2) and two turbulence models. The standard k-$\varepsilon$ model and the Reynolds stress model (RSM) were chosen to improve the accuracy of CFD prediction. To obtain comparative data, the temperature distribution and velocity vector profiles were measured in a full-scale cold storage facility and in a 1/5 scale model. The agricultural products domain in cold storage was modeled as porous for economical computation. The RSM prediction showed good agreement with experimental data. In addition, temperature distribution was simulated in the cold storage rooms to estimate the uniformity of temperature distribution using the validated model.

• IMMUNE NETWORK
• /
• v.6 no.4
• /
• pp.192-198
• /
• 2006

Background: Investigating strategy to enhance efficiency of gene transfer via adenovirus is critical to sustain gene expression in targeted cells or tissues to regulate immune responses. However, the use of adenovirus as a gene delivery method has been limited by the native tropism of the virus. In this study, the critical parameter is to improve the efficient binding of viral particles to the plasma membrane prior to cellular uptake. Methods: Human immunodeficiency virus (HIV-1) trans-acting activator of transcription (TAT), a protein transduction domain, was fused to the ectodomain of the coxsackie-adenovirus receptor (CAR). The CAR-TAT protein was produced from a Drosophila Schneider 2 cells (S2) transfected with CAR-TAT genes. The function of CARTAT was analyzed the efficiency of adenoviral gene transfer by flow cytometry, and then immunizing AdVGFP with CAR-TAT was transduced on dendritic cells (DCs). Results: S2 transfectants secreting CAR-TAT fusion protein has been stable over a period of 6 months and its expression was verified by western blot. Addition of CAR-TAT induced higher transduction efficiency for AdVGFP at every MOI tested. When mice were vaccinated with DC of which adenoviral transduction was mediated by CAR-TAT, the number of IFN-${\gamma}$ secreting T-cells was increased as compared with those DCs transduced without CAR-TAT. Conclusion: Our data provide evidence that CAR-TAT fusion protein enhances adenoviral transduction and immunogenecity of transgenes on DCs and may influence on the development of adenoviral-mediated anti-tumor immunotherapy.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.472-483
• /
• 2013

Actual maritime exercise for improving the capability of submarine sonar operator leads to a lot of cost and constraints. Sonar simulator maximizes the capability of sonar operator and training effect by solving these problems and simulating a realistic battlefield environment. In this study, a passive sonar simulator algorithm is suggested, where the simulator is divided into three modules: maneuvering module, noise source module, and sound propagation module. Maneuvering module is implemented in three-dimensional coordinate system and time interval is set as the rate of vessel changing course. Noise source module consists of target noise, ocean ambient noise, and self noise. Target noise is divided into modulated/unmodulated and narrowband/broadband signals as their frequency characteristics, and they are applied to ship radiated noise level depending on the vessel tonnage and velocity. Ocean ambient noise is simulated depending on the wind noise considering the waveguide effect and other ambient noise. Self noise is also simulated for flow noise and insertion loss of sonar-dome. The sound propagation module is based on ray propagation, where summation of amplitude, phase, and time delay for each eigen-ray is multiplied by target noise in the frequency domain. Finally, simulated results based on various scenarios are in good agreement with generated noise in the real ocean.

• Journal of KIISE:Software and Applications
• /
• v.36 no.1
• /
• pp.70-81
• /
• 2009

Ontology is an explicit specification of concepts and relationships between concepts in an interest domain. As considered as one of typical knowledge representation methods, ontology is applied to various studies such as information extraction, information integration, information sharing, or knowledge management. In IT based industries, ontology is applied to research on information integration and sharing in order to enhance interoperability between enterprises. In supply chains or logistics, several enterprises participate as business partners to plan movements of goods, and control goods and logistics flows. A number of researches on information integration and sharing for the effective and efficient management of logistics or supply chains have been addressed. In this paper, we address an ontology as a knowledge-base for semantic-based integration of logistics information distributed in the logistics flow. Especially, we focus on developing an ontology that enables to represent and translate semantic meaning of EPC data in the EPC Network applied logistics. We present a scenario for tracing products in logistics in order to show the value of our ontology.

• Journal of Science of Art and Design
• /
• v.9
• /
• pp.49-87
• /
• 2006

Narrative has broad domains. So it is related to the everything man faces in his daily life and also performed in various modes. Narrative is revealed through all media including a character, which is also applied to plastic art. And narrative objects formed beyond the differences in media aid forms of expression are commonly based on a language. The study on such objects which created a new conceit of narratology can be said to be a spiritual trend by which to understand the world and man from the viewpoint of a 'story'. Plastic art took high interest in narrative in the same period as the rise of postmodernist art in the latter half of the 20th century, which was also applied to sculpture. The researcher, therefore, investigated through the history of sculpture in the 20th century the process in which narrative was denied under the value system of modernism and reappeared with the quickening of postmodernism. And as a result this period could be briefly characterized by 'return to figure' and 'reappearance of narrative'. The is, such flow means that late sculpture converted its center of interest from simple geometric abstract forms to irregular, figurative images. The researcher chose as the subject of his study the work of Louise Bourgeois, who was judged to have performed narrative positively and successfully among a great number of performed narrative positively and successfully among a great number of postmodernist sculptors who adopted it as their own strategy of expression. As the central artist of postmodrnist sculpture, She expressed human desire and condition as sexuality through the introspection of her own personal experience in contrast to the character of pop art sensitive to external world. The researcher borrowed narrative semiotics as a method of analyzing more elaborately the problem about the generation of narrative shown in her works. For it, he selected as the sample work for analysis Bourgeois's , which were judged to contain narrative most abundantly and as the metaphor of a gaze and recollection presented a new woman self that sublimed love, hatred, and loneliness. The narrative in her works are characterized by introspection questioning one's own trauma. It has independent domain and characteristics and clearly reveals narrative and content-centered characteristics, which are commonly discovered in postmodernist sculpture. The researcher could more concretely and definitely understand the characteristics of narrative through figurative images by analyzing the sample work. The researcher wanted to call your attention to the fact that the sculpture in the late 20th century contained narrative commonly and uniformly despite being characterized by various expressions and modes. And the focused on highlighting the fact that the narrative was more effectively revealed through figurative images of human body and simultaneously analyzing the formalizing process and structure for narrative. Besides he wanted to argue that the position of narrative defining the characteristics of sculpture should be valued more justly. Also, such acceptance of narrative, which is discovered in the sculpture, will have to be understood as the characteristics of the period reflecting the cultural aspect of the present time.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.245-255
• /
• 2008

Korea Hydro and Nuclear Power Company(KHNP) conducted site investigations for a low and intermediate-level nuclear waste repository in the Gyeong Ju site. The site characterization work constitutes a description of the site, its regional setting and the current state of the geosphere and biosphere. The main objectives of hydogeological investigation aimed to understand the hydrogeological setting and conditions of the site, and to provide the input parameters for safety evaluation. The hydogeological characterization of the site was performed from the results of surface based investigations, i.e geological mapping and analysis, drilling works and hydraulic testing, and geophysical survey and interpretation. The hydro-structural model based on the hydrogeological characterization consists of one-Hydraulic Soil Domain, three-Hydraulic Rock Domains and five-Hydraulic Conductor Domains. The hydrogeological framework and the hydraulic values provided for each hydraulic unit over a relevant scale were used as the baseline for the conceptualization and interpretation of flow modeling. The current hydrogeological characteristics based on the surface based investigation include some uncertainties resulted from the basic assumption of investigation methods and field data. Therefore, the reassessment of hydrostructure model and hydraulic properties based on the field data obtained during the construction is necessitated for a final hydrogeological characterization.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.38-52
• /
• 1991

In this paper, a semi-Lagrangian method is used to solve the nonlinear hydrodynamics of a three-dimensional body beneath the free surface in the time domain. The boundary value problem is solved by using the boundary integral method. The geometries of the body and the free surface are represented by the curved panels. The surfaces are discretized into the small surface elements using a bi-cubic B-spline algorithm. The boundary values of $\phi$ and $\frac{\partial{\phi}}{\partial{n}}$ are assumed to be bilinear on the subdivided surface. The singular part proportional to $\frac{1}{R}$ are subtracted off and are integrated analytically in the calculation of the induced potential by singularities. The far field flow away from the body is represented by a dipole at the origin of the coordinate system. The Runge-Kutta 4-th order algorithm is employed in the time stepping scheme. The three-dimensional form of the integral equation and the boundary conditions for the time derivative of the potential Is derived. By using these formulas, the free surface shape and the equations of motion are calculated simultaneously. The free surface shape and fille forces acting on a body oscillating sinusoidally with large amplitude are calculated and compared with published results. Nonlinear effects on a body near the free surface are investigated.