• 제목/요약/키워드: flow dependency

검색결과 195건 처리시간 0.028초

열린 끝단과 중앙 홈을 갖는 스퀴즈 필름 댐퍼의 감쇠 특성에 대한 실험적 규명 (Experimental Identification of the Damping Characteristics of a Squeeze Film Damper with Open Ends and Central Groove)

  • 김남규;김태호;강경대
    • Tribology and Lubricants
    • /
    • 제40권1호
    • /
    • pp.28-37
    • /
    • 2024
  • This paper presents the development of a squeeze film damper (SFD) test rig and experimental identification of the effects of clearance, damper length, journal eccentricity ratio, excitation amplitude, oil supply pressure, and oil flow rate on the damping coefficients of a test SFD with open ends and a central groove. Test data are compared with predictions from a simple model developed for short SFDs with open ends and a central groove. The test results show a significant decrease in the damping coefficient with increasing clearance and a dramatic increase with damper length, which are in good agreement with the simple model predictions. According to the simple model, the damping coefficient is inversely proportional to the cube of the clearance and directly proportional to the cube of the length. An increase in the journal eccentricity ratio results in a dramatic increase in the damping coefficient by as much as 15 times that of the concentric case, particularly at low excitation frequencies. By contrast, the measured damping coefficient remains almost constant with changes in the excitation amplitude and supply pressure, which are not major factors in the damper design. In general, the test data agree well with the simple model predictions, excluding cases that show increases in the SFD length and journal eccentricity, which indicate significant dependency on the excitation frequency.

온도의존성 열특성 계수를 고려한 화재에 노출된 철근콘크리트 골조의 해석적 연구 (Temperature-Dependency Thermal Properties and Transient Thermal Analysis of Structural Frames Exposed to Fire)

  • 한병찬;권영진;김재환;신영수;최은규
    • 콘크리트학회논문집
    • /
    • 제19권3호
    • /
    • pp.283-292
    • /
    • 2007
  • 본 연구는 화재에 노출된 철근콘크리트 구조물의 열적 특성 및 구조 거동을 예측할 수 있는 비정상 온도 분포 해석 및 비선형 유한요소해석 기법 개발에 관한 것으로써, 범용 유한요소해석 프로그램인 DIANA를 이용하여 화재에 의한 고온을 받는 철근콘크리트 구조에 대한 수치해석을 수행하고 그 결과를 비교분석하였다. 고온을 받는 철근콘크리트 골조에 대한 수치해석은 시간의존 비정상 온도 분포 해석과 비선형 유한요소해석의 2단계로 진행된다. 비정상 온도 분포 해석에서는 열전도율, 열용량, 열팽창계수에 대한 시간의존 변수를 온도 함수로 표현하여 이를 고려하였으며, 비선형 유한요소해석에 있어서는 콘크리트의 비선형성과 균열을 고려하기 위하여 파괴 역학적 관점을 도입하였다. 또한 철근콘크리트 단순보에 대한 내화 실험을 실시하여, 재료의 열적 특성 및 해석 기법에 대한 검증을 실시하였다. 이러한 해석 기법을 철근콘크리트 골조로 확장하여 열에 의한 콘크리트 및 철근의 역학적 물성 변화 요인을 고려한 해석을 통하여 각각의 변수에 대한 비교 분석을 수행하였다. 본 연구에서의 고온 환경하의 철근콘크리트 구조물에 대한 비선형 유한요소해석기법은 온도에 따른 재료의 열적 특성 및 역학적 성능 및 화재-온도 곡선을 자유롭게 입력하여 고려할 수 있으며, 추후 관련 해석에 용이하게 사용될 수 있을 것으로 판단되었다.

입수 충격 수중 순간 소음에 대한 실험적 연구 (Experimental Study on Underwater Transient Noise Generated by Water-Entry Impact)

  • 정영철;성우제;이근화;김형록
    • 한국음향학회지
    • /
    • 제33권1호
    • /
    • pp.10-20
    • /
    • 2014
  • 본 연구에서는 입수 충격에 의한 수중 순간 소음을 연구하기 위해, 황해에서 발사대를 이용하여 해상 실험을 진행하였다. 해상시험선인 청해호 우현상에서 발사대를 이용하여 실린더 몸체를 수직으로 발사하였으며, 이때 발생하는 소음을 하이드로폰으로 측정하였다. 실험에서는 원통형, 원뿔형, 반구형 두부 형상을 가진 3가지 종류의 실린더 몸체가 사용되었다. 측정된 신호는 시간적으로 확연하게 구분되어 3단계로 전시되었다 : (1) 초기 충돌 및 물체 진동단계, (2) 개방 공동 유동 단계, (3) 공동 붕괴 및 거품 진동 단계. 대부분의 경우, 거품 진동 단계의 파형이 초기 충돌 및 물체 진동 단계에 비해 우세하게 나타났다. 공동이 붕괴되기 시작하는 핀치 오프 시간은 0.18 ~ 0.2 s에 발생하였으며, 평균 거품 지속 시간은 0.9 ~ 1.3 s로 지속되었다. 입수 충격 소음은 100 Hz 이하의 대역에서 에너지가 집중되어 있었으며, 생성되는 소음은 두부 형상, 물체 질량, 발사 속도에 의해 영향을 받았다. 결과적으로, 거품 주파수에서 에너지 스펙트럼 밀도의 크기는 원통형, 원뿔형, 반구형 순으로 나타났으며, 동일 입수체에 대해서는 초기 에너지가 클수록 거품 주파수에서 에너지 스펙트럼 밀도가 크게 나타났다. 최종적으로, 버블이 폭발하는 물리적 현상을 기반으로 모의된 신호와 계측 값간 비교 결과 만족스러운 결론을 얻을 수 있었다.

극 초음속 경계층 해석을 위한 γ-Reθt모델 개선 연구 (A Study on Improvement γ-Reθt Model for Hypersonic Boundary Layer Analysis)

  • 강선오;오세종;박동훈
    • 한국항공우주학회지
    • /
    • 제48권5호
    • /
    • pp.323-334
    • /
    • 2020
  • 경계층 천이는 극초음속 비행체의 열공력 성능에 직접적인 영향을 미치기 때문에, 성능 해석과 설계를 위해 천이지점의 정확한 예측 능력이 필수적으로 요구된다. 본 연구에서는 극초음속 경계층 천이 예측을 위한 γ-Reθt 모델을 개선하고 검증하였다. 천이 시작 위치 결정에 영향을 주는 간헐도 수송방정식 생성항의 계수를 압축성 경계층 상사해를 기반으로 마하수와 벽면온도, 자유류 정체온도 등에 대한 함수 형태로 구성하고 적용하였다. 기본 모델의 Reθc와 Flength 상관관계식에 마하수에 따른 천이 시작 운동량두께 레이놀즈수와 천이구간의 길이 변화를 반영할 수 있도록 마하수에 대한 관계식을 추가로 결정하여 적용하였다. 실용적인 사용을 고려하여 제안 모델을 상용 CFD 코드에 적용하였으며, 검증을 위해 모델을 사용하여 극초음속 평판과 원뿔 경계층 해석을 수행하였다. 실험 결과와의 비교를 통해 마하수와 단위 레이놀즈수 변화에 대한 개선된 예측성능을 확인하였다.

수직축 조류발전 터빈의 유체공학적 용량 산정기법 개발 (Development of Hydrodynamic Capacity Evaluation Method for a Vertical-Axis Tidal Stream Turbine)

  • 이대형;현범수;이정기;김문찬;이신형
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제15권2호
    • /
    • pp.142-149
    • /
    • 2012
  • 다양한 축척을 갖는 조류발전용 수직축 터빈의 유속과 직경의 변화가 터빈의 유체공학적 효율에 미치는 영향을 수치적으로 연구하였다. 수치해석은 직경 산정식을 사용하여 도출된 동일형상의 다양한 치수의 기준터빈에 대하여 수행되었으며 유속과 직경 변화에 따른 효율의 차이에 대해 알아보았다. 해석결과 터빈의 효율은 레이놀즈 수 변화에 따라 체계적으로 증가하는 것을 확인하였으며, 이로부터 크기가 다른 동일형상의 터빈의 성능은 TSR(Tip Speed Ratio)과 레이놀즈수(Reynolds number)만의 함수로 표시할 수 있음을 알 수 있었다. 이상의 수치해석 결과를 이용하여 수직축 터빈 초기설계단계에서 필요한 간편한 용량산정기법을 제안하고 유속, 직경, 터빈회전수 간의 상호관계를 다양한 관점에서 도표화 하였다. 본 연구는 터빈용량 10 kW~300 kW 사이의 수직축 터빈 초기설계 시에 효과적으로 활용될 수 있을 것으로 기대된다.

빈곤노인의 노화경험에 대한 현상학적 연구 (A Phenomenological Study on the Lived Experience of Aging of the Poor Elderly)

  • 장경은
    • 한국사회복지학
    • /
    • 제61권4호
    • /
    • pp.355-380
    • /
    • 2009
  • 본 연구는 빈곤노인의 노화경험의 의미를 발견해내고 이를 바탕으로 빈곤노인을 위한 복지정책을 제시하고자 하였다. 이러한 목적을 위해 빈곤노인을 기준표집방법으로 총 16명 선정하여 심층면접을 진행하였고 Colaizzi(1978)의 현상학적 연구방법을 사용하였다. 연구결과, 빈곤노인의 노화경험의 의미는 27개 주제, 10개 주제묶음과 4개의 범주로 나타났다. 4개의 범주는 '죽음으로 향해 가기', '초라해지는 마음', '험한 인생살이', '삶의 끈을 지켜나가기'이었다. 이러한 의미를 통합해볼 때 빈곤노인의 노화경험의 본질은 '정부로부터 생계비를 받을지언정 제 힘으로 살아가기'로 발견되었다. 빈곤노인의 노화경험은 의존적이라기보다는 독립적이고 긍정적인 삶의 의미를 강하게 드러냈고, 생계비가 최소한의 생존비용임을 보여주었고, 심한 죽음불안을 나타냈으며, 가(家) 중심의 유교문화적 맥락을 통해 이해될 수 있었다. 이에 빈곤노인복지정책은 이들의 독립적이고 긍정적인 생활지원을 위한 사회활동의 촉진, 최저생계비의 현실화, 심리정서적 서비스의 강화, 죽음준비교육의 실시, 빈곤노인복지정책의 매뉴얼 구축 등으로 제시되었다.

  • PDF

PIV를 이용한 흡수조 내 유속분포 및 와류강도 측정에 대한 연구 (A Study of the Velocity Distribution and Vorticity Measurement in the Pump Sump Using PIV)

  • 변현혁;김서준;윤병만
    • 대한토목학회논문집
    • /
    • 제40권2호
    • /
    • pp.145-156
    • /
    • 2020
  • 최근 도시지역의 불투수율 증가로 인해 내수침수 위험성이 증가하고 있다. 이에 도시침수 방지대책으로 빗물펌프장의 증설 및 신설에 대한 필요성이 부각되고 있다. 빗물펌프장의 효율을 증가시키기 위해서는 흡수조에서 발생하는 와류의 제어가 필요하다. 따라서 와류를 효과적으로 제어하기 위해서 펌프 흡수조 내 흐름특성 분석이 필요하다. 이에 본 연구에서는 입자영상유속측정법을 이용하여 흡수조 내 유속분포 및 와류강도를 측정하기 위한 촬영 및 분석 조건들에 대한 민감도 분석을 실시하여 흡수조 내 유속 및 와류강도 측정의 한계를 확인하고 최적 방법들을 제시하고자 한다. 이를 위해 우선 레이저를 이용하여 흡수조 내 흐름을 촬영하였고, 상관영역 크기와 촬영 시간간격 및 측점 간격의 변화에 따른 유속분포와 와도분포를 비교하여 민감도를 검토하였다. 본 연구에서 대상으로 한 흐름조건의 자유수면와류의 경우 상관영역 크기가 와류 크기의 약 13 % 이상에서는 유속 산정 정확도가 감소하는 것으로 나타났으며, 연속되는 두 장의 영상 간 입자의 변위가 1 mm 이상이 되면 연직방향의 흐름 때문에 이탈되는 입자들이 많아져 정확도가 감소하는 것으로 나타났다. 또한 자유수면와류가 차지하는 격자의 개수가 증가할수록 와도의 크기가 커지는 것으로 나타났다. 이와 같은 연구결과는 입자영상유속계를 활용한 흡수조 내 유속분포 및 와류강도 측정 시 촬영 및 영상분석 조건을 결정하는데 기초자료로 활용될 것으로 기대된다.

Consequences of Water Induced Disasters to Livelihood Activities in Nepal

  • Gurung, Anup;Karki, Arpana;Karki, Rahul;Bista, Rajesh;Oh, Sang-Eun
    • 한국환경농학회지
    • /
    • 제31권2호
    • /
    • pp.129-136
    • /
    • 2012
  • BACKGROUND: The changes in the climatic conditions have brought potentially significant new challenges, most critical are likely to be its impact on local livelihoods, agriculture, biodiversity and environments. Water induced disasters such as landslides, floods, erratic rain etc., are very common in developing countries which lead to changes in biological, geophysical and socioeconomic elements. The extent of damages caused by natural disasters is more sever in least developing countries. However, disasters affect women and men differently. In most of the cases women have to carry more burden as compared to their male counterpart during the period of disasters. METHODS AND RESULTS: This study examines the impact of disasters on the local livelihood especially agriculture and income generating activities of women in three districts of Nepal. The study uses the primary data collected following an exploratory approach, based on an intensive field study. The general findings of the study revealed that women had to experience hard time as compared to their male counterpart both during and after the disaster happen. Women are responsible for caring their children, collecting firewood, fetching water, collecting grass for livestock and performing household chores. Whereas, men are mainly involved in out-migration and remained out-side home most of the time. After the disaster occurred, most of the women had to struggle to support their lives as well as had to work longer hours than men during reconstruction period. Nepal follows patriarchal system and men can afford more leisure time as compared to women. During the disaster period, some of the households lost their agricultural lands, livestock and other properties. These losses created some additional workload to women respondent, however at the same time; they learn to build confidence, self-respect, self-esteem, and self-dependency.Although Nepal is predominantly agriculture, majority of the farmers are at subsistence level. In addition, men and women have different roles which differ with the variation in agro-production systems. Moreover women are extensively involved in agricultural activities though their importances were not recognized. Denial of land ownership and denial of access to resources as well as migration of male counterparts are some of the major reasons for affecting the agricultural environments for women in Nepal. CONCLUSION: The shelter reconstruction program has definitely brought positive change in women's access to decision making. The gradual increase in number of women respondent in access to decision making in different areas is a positive change and this has also provided them with a unique opportunity to change their gendered status in society.Furthermore, the exodus out-flow of male counterparts accelerated the additional burden and workload on women.

Leuconostoc mesenteroides Sikhae의 Crude Dextransucrase 반응시간에 따른 Dextran 생성액의 유변성 (Effect of Reaction Time on the Rheological Properties of Dextran Formed Solution Produced by Crude Dextransucrase from Leuconostoc rnesenteroides Sikhae)

  • 박춘상;이철호
    • 한국미생물·생명공학회지
    • /
    • 제20권3호
    • /
    • pp.316-323
    • /
    • 1992
  • 가자미 식해에서 분리한 Leuconostoc mesenteroides(Sikhae)로부터 생산한 dextransucrase 조효소액에 10 sucrose를 반응시켜 얻은 dextran 생성액의 유변성과 생성된 dextran의 분자량 분포 및 수율을 반응시간별로 조사하였다. Dextran 생성속도는 반응액의 HPLC를 이용한 당분석과 점도측정으로 추정이 가능하였다. Periodate oxidation 시험결과 정제된 dextran은 89의 Alpha-(1-6) 결합외에 11의 Alpha-(1-3) 부결합이 존재하는 것으로 판단되며, 반응시간이 경과함에 따라 dextran 생성액은 높은 항복력을 갖는 Bingham-pseudoplastic 유체특성을 나타내었다. 반응시간이 결과함에 따라 시간의존 특성(thixothropicity)이 증가하였는데 이러한 현상은 GPC 분석을 통하여 dextran 생성액내 고분자 dextran의 비율증가에 의한 것임을 알 수 있었다. Dextran 생성액은 반응 8시간후에 최고점도 (2680 cP. $\gamma$=$33.75s^{-1}$, $25^{\circ}C$)를 나타내었으며, 그 이후부터 점도는 다시 감소하였다. 또한 dextran 생성액은 온도가 증가함에 따라 점도가 감소하였으며, 이는 Arrhenius의 일반식으로 표시할 수 있었다. Arrhenius 식으로 구한 dextran 생성액의 유동 활성화에너지는 반응시간이 경과함에 따라 증가하였으며, 8시간 반응시킨 dextran 생성액의 경우 1.69kcal/gmole 정도로써 온도증가에 의한 점도변화가 비교적 적음알 수 있었다.

  • PDF

The Estimation of Emission Factor of N2O and CH4 by Measurement from Stacks in the Waste Incinerators and Cement Production Plants

  • Choi, Sang-Min;Im, Jong-Kwon;Hong, Ji-Hyoung;Lee, Sue-Been;Zoh, Kyung-Duk
    • 한국환경보건학회지
    • /
    • 제33권3호
    • /
    • pp.217-226
    • /
    • 2007
  • The purpose of this study is to estimate the emission factor of $non-CO_2$ global warming gases such as $N_2O$ and $CH_4$ by measuring concentrations from stacks of waste incinerators and cement production plants. Based on the established monitoring methods, $N_2O$ concentration measured from stacks in incinerator were between 0.62 and $40.60\;ppm_v$ (ave. $11.50\;ppm_v$). The concentration of $N_2O$ was dependent on the incinerator types. However, the concentrations of $CH_4$ gas were between 2.65 and $5.68\;ppm_v$ (ave. $4.22\;ppm_v$), and did not show the dependency on the incinerator types. In the cement production plant, the concentration ranges of $N_2O$ from the stack were from 6.90 to $10.80\;ppm_v$ (ave. $8.60\;ppm_v$), and $CH_4$ were between 1.80 and $2.20\;ppm_v$ (ave. $2.60\;ppm_v$). Using measured concentrations, the emission amounts of $N_2O$ and $CH_4$ from stacks per year were calculated. The results were is 4.2 ton $N_2O/yr$ in the incinerators, and 53.7 ton $N_2O/yr$ in the cement facilities. The big difference is from the flow rate of flue gas in the cement facilities compared to the incinerators. By the same reason, the $CH_4$ emission amounts in cement plant and incinerator was found to be 339 ton $CO_2/yr$ and 34.1 ton $CO_2/yr$, respectively. Finally, the emission factor of $N_2O$ in the incinerators were calculated using the measured concentration and the amount of incinerated wastes, and was $42.5\sim799.1\;g/ton$ in kiln and stoker type, $11.9\sim79.9\;g/ton$ in stoker type, 90.1 ton/g in rotary kiln type, 174.9 g/ton in fluidized bed type, and 63.8 g/ton in grate type, respectively. Also, the emission factors of $CH_4$ were found to 65.2-91.3 g/ton in kiln/stoker type, 73.9-122 g/ton in stoker type, 109.5 g/ton rotary kiln, and 26.1 g/ton in fluidized bed type. This result indicates that the emission factor in incinerators is strongly dependent on the incinerator types, and matched with result of IPCC (International Panel on Climate Change) guideline.