• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.71-74
• /
• 2008

This paper aims at studying the key design elements for the optimal ventilation system design, developing the design models and suggesting the design guidelines. The key elements include the basic exhaust emission rate, wall friction coefficient, vehicle drag coefficient and slip streaming effect, jet fan operating efficiency, natural ventilation force and installation scheme for jet fans and ventilation monitors in tunnel. The design models developed in this study are one-dimensional ventilation simulator to analyze the air flow, pressure profile and pollutant dispersion inside and outside tunnel, expert model to choose the optimal ventilation method, and the ventilation characteristic chart to evaluate the preliminary ventilation system. The study results are reflected in the design guideline for road tunnel ventilation system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.2
• /
• pp.133-139
• /
• 2010

PC camera-based instant messenger have problems of video image break/delay and noise. The reason is caused by a composed problem that PC Camera is belong to the connected PC and operating in the PC. This research suggests an instant messenger that uses network camera connected to LAN instead of PC camera. Therefore, the instant messenger has a component that the camera is separated from PC. This research designs sequence diagram, video calls flow chart, and graphic user interface of the instant messenger. The instant messenger based on network camera provides high quality video calls service and makes it possible to call from a special remote site with real-time video image.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.139-145
• /
• 2015

In these days, hazards in laboratories are consistently increasing due to high technological advance in modern science. Efforts to prevent accidents in laboratories became law named [ACT ON THE ESTABLISHMENT OF SAFE LABORATORY ENVIRONMENT]. The law made laboratories more safely but it's not enough to keep up laboratory safety in advanced countries. To improve laboratory safety, this study reformed laboratory emergency response flow chart based on each emergency scenarios and its evaluated hazards in laboratories applied wireless hazard detecting equipments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.1-16
• /
• 1997

This paper improves the autonomy for supplier's schedule and the flexibility of the final assembly line. The final assembly line is a single work station and each product taking different assembly time is considered. In the assembly schedule, the heuristic method based on the goal chasing method is used. Consequently, suppliers can independently determine their output rates and thus, change their workload pattern according to their needs and priorities. Moreover, this flexibility can help to avoid expensive final-assembly-line stoppages in case of sudden part supply disruptions. The sequencing method can be easily implemented into an existing just-in-time system. In addition, the mathematical model was formulated and the algorithm was explained through the flow chart. The numerical example was given and the efficiency of this method is shown through the analysis of computational results of that example.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.4 s.40
• /
• pp.453-461
• /
• 1991

The purpose of this research was to develop an automatic design with dialogue function in computer for pants pattern making. AutoCAD including AutoLISP was the programable software package, so AutoCAD were used basically for this research. The conclusions were like these; 1. Dialogue functions of computer allowed the designer to choose emotional elements. 2. The coordinate points needed in drafting for women's pants pattern making were suggest-ed by numerical fomula. So, if the input data of body sizes needed were used, pants patterns for person were automatically obtained as the output. 3. The several curvature parts were presented by using exponent function and the arc drawing of AutoCAD and the degree of bends were to be selected by choosing the simple parameter of algebraic function and arc AutoCAD command. 4. The program permited pattern manipulation and pattern grading of five standard sizes were presented. Also its flow chart by AutoLISP with dialogue function were presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.2
• /
• pp.91-96
• /
• 2015

There are provision for risk analysis in IEC standards. It is to determine the need for installation of a surge protection device (SPD) in order to protect the low-voltage electrical installations from overvoltages caused by atmospheric phenomena and the like. However, scattered many related standards, the lack of details are not easy to apply it in the field. We investigated the relevant domestic and international standards for applies to the international standards in domestic. And we proposed the flow chart for determining the need for protection of the low-voltage electrical installations from overvoltage due to atmospheric phenomena and it set the appling target facility.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1013-1016
• /
• 2002

제어 시스템에 사용되는 흐름 제어 언어로는 IL(Instruction List), ST(Structured Text), FBD(Function Block Diagram), SFC(Sequential Function Chart), LD (Ladder Diagram)가 있다. 일반적으로 제어 시스템에 탑재하여 사용하는 언어는 상기 언어 중 두 종류 이하의 특정 언어로 제한되어 있다. 이러한 제약을 보완하기 위해, 모든 흐름 제어 언어를 통합 분석할 수 있는 통합 분석기가 필요하다. 본 논문에서는 흐름 제어 언어의 통합 분석 처리가 가능하도록 그래픽 표현의 FBD 를 문자 표현의 EST(Extended Structured Text)로 변형하는 규칙과 문자 표현의 EST 를 IL 로 변형하는 규칙을 제시한다. 언어간의 변형 과정에서 FBD 를 ST 로 표현할 수 없는 부분을 EST 로 정의한다. 또한 본 논문에서 제안된 EST 를 기반으로 통합 분석기의 구조를 제시한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1993.02a
• /
• pp.401-493
• /
• 1993

하천 수질관리 실무에 가장 널리 사용되고 있는 QUAL2-E 모형에 대한 이론적 배경과 입력 자료의 준비, 결과의 분석 및 활용에 이르는 모형 적용상의 제반 과정에 대한 강의와 토론 후에 실습을 통하여 모형의 사용방법을 습득하도록 한다. 1. 수질오염 예측을 위한 이론적 기본틀 2. 우리나라 실무에서 사용중인 수질 관련 모형과 문제점 3. QUAL2-E 모형의 이론적 배경 3.1 모형의 구성 개념 3.2 하천 수리학적 특성 3.3 지형-기상학적 특성 3.4 수질 관련 인자 간의 기능적 상호관계 4. QUAL2-E 모형의 적용 절차 4.1 적용 가능한 수체 4.2 대상 오염물질(15종류) 4.3 수질예측과정 Flow Chart 4.4 입력자료의 구성 4.5 출력자료의 구성 5. QUAL2-E 모형의 실습

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.446-450
• /
• 1996

본 논문은 Computer Aided Software Engineering (CASE) Tool을 이용할 경우의 Safety Critical 소프트웨어 개발 방법론인 구조적 분석 및 구조적 설계 모델링 방법론을 Teamwork CASE tool의 예를 중심으로 제안하고자 한다. 제시된 사례는 NSIS(Nuclear Safety Information System)으로서 Essential Modeling과 Implementation Modeling을 제시하였는데 Teamwork CASE 환경하에서의 분석 및 설계 절차, 지침 등을 제시하였다. Essential Modeling에서는 NSIS의 MMIS 분석범위 및 External Interface를 제시하는 환경 모델(Environmental Model)과 MMIS의 기능을 계층구조적으로 분할하는 행위모델링(Behaviroal Modeling)을 각각 Context Diagram과 Data Flow Diagram (DFD)으로 그 과정을 제시하였다. Implementation Modeling에서는 Essential Modeling으로 부터 나온 결과물을 토대로 Boss Rule, Transform Rule과 Transaction Rule 등을 거쳐 NSIS MMIS의 설계 근간이 되는 Structured Chart(SC)를 제시하였다. 본 논문에서 제시된 모델링 방법론을 통하여 Safety Critical 소프트웨어 개발시 Teamwork CASE Tool을 활용할 수 있음과 동시에 분실 및 설계의 일치성을 통하여 Safety Critical 소프트웨어의 안전성 확립과 품질보증 목표에 기여할 수 있다.

• The Journal of Korea Robotics Society
• /
• v.17 no.4
• /
• pp.431-437
• /
• 2022

This paper deals with a study on the automatic depalletizing robot for parcels loaded in rolltainer of domestic postal distribution centers. Specifically, we proposed a robot system that detect parcels loaded in a rolltainer with a 3D camera and perform de-palletizing using a cooperative robot. In addition, we developed the task flow chart for parcel de-palletizing and the method of retreat motion generation in the case of collision with rolltainer. Then, we implemented the proposed methods to the robot's controller by developing robot program. The proposed robot system was installed at the Anyang Post Distribution Center and field tests were completed. Field tests have shown that the robotic system has a success rate of over 90% for depalletizing task. And it was confirmed that the average tact time per parcel was 7.3 seconds.