• 한국염색가공학회지
• /
• 제10권4호
• /
• pp.37-44
• /
• 1998

The purpose of this study was to elucidate the effect of weight loss of polyethylene terephthalate(PET) fabrics on the mechanical properties such as bending and shear. In order to compare the effect of treatment machine on the mechanical properies of treated PET fabrics, PET fabrics were hydrolyzed with NaOH aqueous solution using Tank machine and Liquor flow machine, respectively. The results were as follows ： 1. The bending rigidity and shear stiffness of hydrolyzed PET fabric decreased markedly up to about 10％ weight loss regardless of treatment machines. At the above 10％ weight loss, the variation of these properties is nearly unchanged. In addition, the bending hysteresis and shear hysteresis also showed similar trend. 2. Weft density change of PET fabrics treated with Liquor flow machine decreased by 1pick/inch. It is assumed that this is attributed to the tension during the treatment of Liquor flow machine. On the other hand, the weft density change of PET fabrics treated with Tank machine is scarcely influeneced by the weight loss. While warp density of PET fabrics treated with Liquor flow machine had no change with weight loss, warp density of PET fabrics treated with Tank machine decreased by 6pick/inch due to the tension. 3. The bending rigidity and shear stiffness of PET fabrics hydrolyzed with liquor flow machine slightly higher than with Tank m/c at the above 10％ weight loss. It is assumed that this is caused by the increasement of the crossing pressure of warp and weft yarn and contact points of filaments in the yarns. Also, the bending and shear hysteresis of PET fabrics treated with Tank machine were higher than that of liquor flow machine.

• Journal of Periodontal and Implant Science
• /
• 제33권2호
• /
• pp.139-147
• /
• 2003

The roots of teeth exposed by gingival recession, may be successfully covered by various type of gingival grafting procedures. Vascularization of the recipient site is an essential determinant of the grafts' survival during the first healing stages. It has been suggested that a procedure by which they stimulate the periosteum presurgically will induce the proliferation of neo-endothelium in the site to be operated. The purpose of this study is to evaluate the variations in the gingival blood flow during 4weeks after periosteal stimulation in patient scheduled to receive gingival grafts and to compare variations in the gingival blood flow between smoker and non-smoker. Laser Doppler Flowmetry(floLAB(R), Moor Instruments Ltd, England ; wave length = 780mm. Max. power =l.6mW) was used to measure the gingival blood flow. 112 sites of 68 male patients (32 smokers and 36 non-smoker), aged between 23 and 48 years (smoker : 24-44 years. mean=32.6, non-smoker : 23-48 years, mean=28.5) were monitored for the blood flow. Gingival blood flow measured at before periosteal stimulation, 1-, 2-, 3-, and 4-weeks after periosteal stimulation from 10 a.m. to 2 p.m. The difference of blood flow in each measuring time, each measuring site and between smokers and non-smokers were statistically analyzed by MANOVA. The results were as follows : (1) Blood flow stayed increased for 2 weeks, and then, it was a tendency to decrease(p<0.05). (2) There was no statistically significant difference of blood flow change between smokers and non-smokers. (3)The blood flow at middle site had lower than mesial and distal site during the measuring periods(p<0.05). The present study suggested that blood flow change following periosteal stimulation was significant difference, thus periosteal stimulation before gingival graft might induce favorable results in gingival recession patient.

• 한국해안·해양공학회논문집
• /
• 제22권5호
• /
• pp.333-343
• /
• 2010

목포해역에서 조위와 조류 관측자료를 분석하여, 낙조류 우세 조류특성을 보이는 것을 확인하였으며 낙조류 우세를 발생하는 물리적 요인에 대해 검토하였다. 노출한계수심, 바닥마찰응력 산정방법, 해안 매립, 조석의 진폭, 비선형 조석, 와점성계수와 목포해역의 낙조류 우세현상의 관련성에 대해서 2차원 해수유동 모형을 적용하여 자세히 조사하였다. 다양한 조건에 대한 모의결과로부터 노출한계수심과 와점성계수는 모의결과에 거의 영향을 주지 않으며, 바닥마찰응력이 증가함에 따라 조류의 비선형성이 증가하여 낙조류 우세현상이 나타나는 것을 확인할 수 있었다. 간사지가 미치는 영향은 간사지가 육지로 바뀌면 낙조류 우세가 심해지고, 간사지가 바다로 바뀌면 낙조류 우세가 사라지는 것을 확인할 수 있었다. 그동안 목포해역에서 진행되어온 해안매립사업은 낙조우세현상을 심화시켜 왔음을 확인할 수 있었으며, 비선형 조석은 비대칭 조류를 생성하는 데 결정적인 역할을 하여 조류의 비대칭성인 강한 목포해역에서 조류를 모의할 때는 개방경계 조위에 비선형조석을 포함해야 함을 확인할 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.587-591
• /
• 2011

To improve the performance of the control butterfly valve seals are used to eccentric shaft. In this case, vertical opening gas of the butterfly valve is non-symmetrical, which will change the flow pattern around the valve. In this study, the eccentric drive shaft of the butterfly valve to change flow characteristics are performed numerically. Flow pattern and pressure drop are investigated as the valve opening angle increases for a given mass flow rate. The valve flow coefficient is compared to the without eccentric shaft.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.360-368
• /
• 2010

This paper describes the flow field and the blade pressure distribution of a horizontal axis wind turbine in various yawed flow conditions. These measurements were carried out with 2.4m-diameter rotor with pressure sensors and a 2-dimensional laser Doppler velocimeter for each azimuth angle in a wind tunnel. The results show that aerodynamic forces of the blade based on the pressure measurements change according to the local angle of attack during rotation. Therefore the wake of the yawed rotor becomes asymmetric for the rotor axis. Furthermore, the relations between aerodynamic forces and azimuth angles change according to tip speed ratio. By the experimental analysis, the flow field and the aerodynamic forces for each azimuth angle in yawed flow condition were clarified.

• 한국가시화정보학회지
• /
• 제19권1호
• /
• pp.94-99
• /
• 2021

In order to increase the efficiency of thermoelectric refrigerators using the Peltier effect, it is necessary to optimize the distribution of the flow of cold air from the fan. In this study, the flow flowing upwards and downwards while changing the area of the flow path was visualized using the PIV technique for the control of cold air in a thermoelectric refrigerator. From these results, the flow rate according to the change in the area of the flow path was confirmed, and design criteria for optimizing the distribution of cold air flowing to the top and bottom of the refrigerator were suggested.

• 한국수자원학회논문집
• /
• 제46권7호
• /
• pp.707-717
• /
• 2013

충적하천에서 발생하는 하천의 침식과 퇴적은 흐름을 통해 발생하는 자연적인 현상이다. 침식 및 퇴적과 관련된 수치모형을 이용한 분석은 하천에 존재하는 보와 같은 수리구조물들의 유사이송을 연구하는데 중요한 요소이다. 본 연구에서는 다기능보들의 효과적인 운영을 위하여 낙동강수계에 위치해 있는 창녕함안보를 대상으로 하상변동을 예측하였다. 2차원 모형은 CCHE2D를 이용하여 유사이송이 지배적으로 발생하는 다기능보 상 하류 구간 12 km를 대상으로 침식과 퇴적에 대한 모의를 수행하였다. 2003년 태풍 "매미"사상을 대상으로 모형을 검 보정 하였으며, 모의결과와 관측값의 비교를 통하여 전체 모의구간에서 신뢰성 있는 결과가 도출되었다. 함안창녕보가 건설된 이후 태풍사상에 의한 하상변동은 상당히 증가하는 것으로 나타났고 하상변동은 유사의 재분배를 야기하였다. 보와 같은 수리구조물들은 하도내 흐름과 유속을 변화시키기 때문에 세굴과 퇴적 문제를 심화시켰다.

• 소음진동
• /
• 제11권1호
• /
• pp.57-67
• /
• 2001

Proposed in this paper is a method of measurement of the flow rate in a pipe. The sound waves which are propagated within a pipe are characterized by that the wavenumber in the axial direction is changed according to the flow rate, and these characteristics are used in the present method of measurement of the flow rate. The amount of change in wavenumber of sound waves according to the flow rate can be obtained from the relationship among acoustic pressure signals within a pipe, which are measured by using a microphone array. The flow rate can be obtained by using the amount of change in wavenumber of sound waves and the relational equation of the flow rate. With respect to errors that can occur during the measurement of the flow rate, the types of errors and the method of correction of those errors are presented. This method of measurement of the flow rate has application limitation conditions due to the sensor interval, assumption of sound waves as plane waves, etc. The numerical simulation and experiments for measuring the flow rate of air in a pipe are performed in order to verify the applicability of this method of measurement of the flow rate. The experimental results are shown to be similar to those of the numerical simulation. And the flow rate measured is shown to be consistent with the actual value within 5% error bound.

• 한국공작기계학회논문집
• /
• 제13권1호
• /
• pp.63-68
• /
• 2004

Recently ER fluids are put to practical use in fluid power industry field. As only with electrical signal change to the valve in which ER fluid flowing, ER fluid flow is controlled, so devepment of simple ER valves have been tried. In this case a technical problem is to check the pressure drop caused from flow rate change in valves because the pressure drop is very small. In this study ER valves are designed and manufactured, and small pressure drop induced from flow rate change is checked by pressure transducer which is made with appling strain gage. The ER valves and pressure drop check method are considered to be applied to the fluid power industry.

• 한국가시화정보학회지
• /
• 제11권2호
• /
• pp.46-54
• /
• 2013

Study of the wave structure and shear layer in the vicinity of a wall mounted cavity is done by time averaged colour schlieren and time resolved instantaneous shadowgraph technique in an M=1.7 flowfield. Effect of change of cavity width on flow structure is investigated by using constant length to depth (L/D) ratio cavity models with varying length to width (L/W) ratio of 0.83 to 4. The time averaged shock wave structure was observed to change with change in cavity width. Dependence of the shock angle at the leading edge on the shear layer width is also evident from the images obtained. Unsteadiness in the flow field in terms of shear layer dynamics and quasi steady nature of shock waves was evident from the images obtained during instantaneous shadowgraph experiments. Apart from the leading and trailing edge shocks, several other waves and flow features were observed. These flow features and the associated physical phenomena are discussed in details and presented in the paper.