• 전기학회논문지
• /
• 제61권12호
• /
• pp.1948-1952
• /
• 2012

The paper presents modal testing and analysis in order to obtain the dynamic characteristics of a middle spacer grids of a nuclear fuel rod. A spacer grid is one of the important structural elements supporting nuclear fuel rods. Such a fuel rod can be oscillated by its thermal expansion, neutron irradiation and etc. due to cooling water flow under the operation of a nuclear power plant. When the fuel rod vibrates, fretting wear due to repeated friction motion between the fuel rods and spacer grids can be occurred, and so the fuel rod is damaged. In this paper, through modal analysis and testing, natural frequencies and modes of a middle spacer grid were calculated, and the following conclusions were obtained. Firstly the numerical first-seven natural frequencies for spacer grids of a fuel rod having complicated structures have a small difference within 3.8% with experimental natural frequencies, and so the suitability of simulation results was verified. Secondly, experimental mode shapes for a middle spacer grid of a nuclear fuel rod were verified by obtaining lower non-diagonal terms through MAC(Modal Assurance Criteria), and were confirmed by the simulation modes.

• 정보학연구
• /
• 제8권3호
• /
• pp.159-176
• /
• 2005

The Purpose of this Article is to analyze the special settlement and electronic settlement system in the international trade. First, Factoring is a fast, easy and flexible way to improve a company's cash flow and generate working capital for the company. Factoring can be short-term or part of an ongoing financing program. New companies can benefit as well, since there is no requirement for a long-term credit history. Second, Forfaiting is a method of trade financing that allows exporters to obtain cash and be free of all risks by selling their medium term receivables on a 'without recourse' basis. Forfaiting can be an alternative to export credit or insurance cover, especially for those transactions in which the export credit agency is not open to a particular country and/or bank. Third, The Bolero System is jointly financed by SWIFT(Society for World International Financial Telecommunications) which handles most of the electronic funds transfer for banks, and the Through Transport Mutual Assurance Association(the TT Club), a mutual insurance association most of whose members are drawn from the Multimodal transport industry or transport intermediaries. Fourth, TradeCard is a payment and settlement system that is an alternative to letters of crdeit. That is, TradeCard is a business-to-business e-commerce infrastructure that enables buyers and sellers to conduct and settle international trade transactions securely over the Internet.

• 한국해양공학회지
• /
• 제31권2호
• /
• pp.103-110
• /
• 2017

The temperature of subsea pipeline, approximately as high as $100^{\circ}C$, is significantly higher than the temperature of surrounding sea water and sediment. In this reason, heat can be lost from the subsea pipeline to cause serious operation problem. Therefore it is important that the subsea pipeline must be designed to ensure that heat loss is small enough. Heat loss of unburied pipeline is higher than buried pipeline. For that purpose, trenching and backfilling system is a commonly used method for maintaining flow assurance in subsea pipeline installation. For this commonly used method, knowing thermal conductivity of backfill is essential to protect a heat loss of pipeline. This paper presents thermal conductivity of backfill soil using laboratory model test and numerical analysis for various backfill. In conclusion, it can be seen that higher the sand content of the man-made backfill sample, the higher the thermal conductivity. On the other hand, as the water content increases, the thermal conductivity becomes smaller.

• 산업경영시스템학회지
• /
• 제36권4호
• /
• pp.18-24
• /
• 2013

A document control system (DCS), ANSIM (KAERI Advanced Nuclear Safety Information Management) was designed for the purpose of documents preparation, review, and approvement for JRTR (Jordan Research and Training Reactor) project. The ANSIM system consists of a document management, document container, project management, organization management, and EPC (Engineering, Procurement and Construction) document folder. The document container folder run after specific contents, a revision history of the design documents and drawings are issued in KAERI. The EPC document work-scope is a registry for incoming documents in ANSIM, the assignment of a manager or charger, document review, preparing and outgoing PM memorandum as attached the reviewed paper. On the other hand, KAERI is aiming another extra network server for the NRR (New Research Reactor) by the end of this year. In conclusion, it is the first, computation system of DCS that provides document form, document number, and approval line. Second, ANSIM increases the productivity of performance that can be recognized the document work-flow of oneself and all participants. Finally, a plenty of experience and knowledge of nuclear technology can be transmitted to next generation for the design, manufacturing, testing, installation, and commissioning. Though this, ANSIM is expected to allow the export of a knowledge and information system as well as a research reactor.

• 대한환경공학회지
• /
• 제30권2호
• /
• pp.190-198
• /
• 2008

본 연구에서는 주유소 등의 지하 유류저장탱크나 파이프의 제한된 수명으로 인해 발생할 수 있는 가솔린의 누출에 의해 MTBE로 토양이 오염되었을 경우를 가정하여, 칼럼실험을 수행하고, CXTFIT 기법을 이용하여 토양 내 MTBE의 이동특성을 살펴 보았다. 칼럼실험에서는 토성, 수분함량, 유기물함량, 주입유속을 달리하여, 주입액과 유출액의 MTBE의 농도 측정값을 비교하고, CXTFIT기법을 이용하여 two-site 비평형 흡착모델에 사용된 매개변수(D, R, $\beta$, $\omega$)를 구하였다. 이들 매개변수와 파과곡선을 이용하여 MTBE의 토양 내 이동특성을 살펴보았다. 토양 내 미세입자와 유기물함량이 많을수록 이류에 의한 영향이 감소하는 것으로 나타났으며, 수분함량과 유속의 증가는 이류에 의한 MTBE의 이동을 더욱 가속시키는 것으로 나타났다.

• 한국HCI학회논문지
• /
• 제13권1호
• /
• pp.21-28
• /
• 2018

1인가구의 급증과 스마트 디바이스 사용의 증가로 1인가구 중심의 컨텍스트 분석과 1인가구 제품에 대한 구체적인 디자인 방향성이 필요한 실정이다. 기존 연구들은 1인가구와 다인가구의 구분없이 스마트 디바이스의 전반적인 컨텍스트에 대한 분석을 진행하였다. 하지만 1인가구는 다인가구에 비해 가족 구성원수와 연령 분포, 주거 공간의 차이가 있기 때문에 스마트 디바이스에 대한 차별화된 행태를 분석해야 한다. 이에 본 연구는 실제 1인가구의 스마트 디바이스 사용 환경을 조사 범위로 한정 짓고, 기존의 포괄적인 컨텍스트의 정의를 사용자의 상황을 중심으로 한정지어 정리하였다. 그리고 구체적이고 실증적인 연구 결과를 위해 사용자 리서치를 통해 나온 Contextual Task를 통하여 Consolidated Flow Model을 구축하였다. 이는 1인가구의 물리적 공간 보장, 효율성, 라이프스타일 반영, 안전성 보장 등의 인터랙션 특징을 나타내고 있다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.21-25
• /
• 2014

In order to develop 2nd generation (2G) high-temperature superconducting (HTS) wires as commercial products, it is necessary to perform a high speed investigation of their superconducting performance. Room-temperature and non-contact optical scanning tools are necessary to verify the microstructure of the superconducting materials, the current flow below the critical temperature, and the critical current density. In this paper, we report our results of an inspection of the electrical transport properties of coated conductors. The samples that we used in our study were highly qualified rare-earth based coated conductors produced via co-evaporation, and $SmBa_2Cu_3O_{7-y}$ (SmBCO) was the superconducting materials used in our studies. A film grown on IBAD-MgO templates shows larger than 400 A/cm at 77 K and a self-field. The local transport properties of the films were investigated by room-temperature imaging by thermal heating. The room-temperature images show structural inhomogeneities on the surface of the films. Bolometric response imaging via low-temperature bolometric microscopy was used to construct the local current mapping at the surface. These results indicate that the non-uniform regions on the surface disturb the current flow, and laser scanning images at room-temperature and at a low-temperature suggest a correlation between the structural properties and transport properties. Thus this method can be effective to evaluate the quality of the coated conductors.

• 한국정보시스템학회지:정보시스템연구
• /
• 제12권1호
• /
• pp.159-175
• /
• 2003

During the early stage of radioactive disposal programs, important issues related with quality assurance of data sets, methodologies, R&D procedures are recognized as important ones. This paper focused on the development of web-based workflow standards for the QA procedures of the radioactive waste disposal programs. The flow of process was analyzed based on workflow concepts proposed by the Workflow Management Coalition (WfMC). QA system is based on the principles of T2R3. T2R3 Workflow was used to standardize and restructure the business and/or work process in the industry or organization. The WfMC has identified five functional interfaces to a workflow service as part of its standardization program. They are composed of process definition interface, worklist handler, application program interface, interface between workflows, and system management. The task flow and QA program were defined based on the workflow ideas. QA procedures for the R&D results of radiation disoposal were analyzed following the reference model of workflow. In addition, six program run list were created and implemented. The creation, revision, and approval of the test data were designed to be inplemented on the web environment. Through this system, R&D procedures such as planning, research, documentation, internal review and future independent peer review processes could be well organized and stored more systematically on the database and knowledge base. This will encourage the usage and data sharing between interested parties through it's clear and transparent workflow standards.

• 방사성폐기물학회지
• /
• 제4권1호
• /
• pp.65-75
• /
• 2006

방사성폐기물 처분 연구 사업이 법률적인 인허가 뿐만이 아니라 일반 국민의 동의를 얻기 위해서는 처분 사업의 안전성에 대한 신뢰성 획득이 중요하며 이를 위해 투명하게 공개될 수 있는 종합 성능 평가 (TSPA, Total System Performance Assessment)의 수행 이 필요하다. 본 연구에서는 처분 성능 평가의 투명성 증진을 위한 방안의 하나로 처분 종합 성능 평가 전 과정에 대해 품질 보증 원칙을 도입하여 평가 관련 전체 업무에 관한 신뢰성 향상을 꾀하고자 하였다. 이를 위해 처분 종합 성능 평가 수행의 다섯 단계인 (1) 기획, (2) 연구 수행 , (3) 문서화, (4) 내부 검토, (5) 독자적인 외부 검토 과정에 T2R3의 품질 보증 원칙을 적용한 인터넷 기반의 Cyber R&D Platform이 개발되었다. 인터넷을 기반으로 하는 본 시스템의 개발을 통해 안전성 평가 관련 모든 참여자들은 평가 전 과정에서 투명성이 유지된 데이터들에 쉽게 접근하여 이를 이용할 수 있다 Cyber R&D Platform은 안전성 평가를 위한 시나리오 개발 관련 데이터인 FEP 목록과 관련 시나리오 정보, 관련 시나리오 도출 과정 및 평가 체계 등을 체계적으로 구축한 FEAS (FEp to Assessment through Scenario development)프로그램과 안전성 평가에 필요한 입력 데이터들을 분류, 저장해 놓은 PAID (Performance Assessment Input Data) 프로그램, 그리고 이러한 자료들을 품질 보증 원칙과 절차에 의한 승인 과정을 통해 입력, 저장할 수 있는 품질 보증 시스템으로 구성되어 있으며 이를 통합 운영함으로써 도출된 데이터들의 신뢰성을 높이고자 하였다. 향후 연구에서는 Cyber R&D Platform과 평가 software와의 통합 운영으로 웹 기반 시스템에 대한 한 번의 접속만으로 안전성 평가 관련 모든 정보를 확인, 이용할 수 있도록 할 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제30권9호
• /
• pp.2021-2026
• /
• 2009

Toluene, xylene and styrene are volatile organic solvents that are commonly used in mixtures in many industries. Because these solvents are metabolized and then excreted in urine, their urinary metabolites are thought to be biomarkers of occupational exposure to these solvents. Therefore, a simple, rapid, and yet reliable analytical method for determining the metabolites is required for accurate biological monitoring. In the present study, a simple and rapid HPLC-UV method was developed for the simultaneous determination of eight major metabolites of toluene, xylene and styrene: hippuric acid (HA), mandelic acid (MA), o-, m- and p-methylhippuric acids (o-, m- and p-MHAs), and o-, m- and p-cresols. A monolithic column was employed as the stationary phase and several conditions, including flow rate, composition of mobile phase and column temperature, were variables for the optimization of the chromatographic resolution. All eight metabolites were successfully resolved within 5 minutes in 10% aqueous ethanol containing 0.3% acetic acid and 1.6% $\beta$-cyclodextrin, using a flow rate gradient of 1.0 - 5.0 mL/min at 25 ${^{\circ}C}$. The performance of this method was validated by linearity, intra- and inter-day accuracy, and precision. The linearity was observed with correlation coefficients of 0.9998 for HA, 0.9999 for MA, 0.9989 for o-MHA, 0.9998 for m-MHA, 0.9991 for p-MHA, 0.9997 for o-cresol, 0.9998 for m-cresol, and 0.9986 for p-cresol. The intra- and inter-day precision of the method were less than 5.89% (CV) and the accuracy ranged from 92.95 to 106.62%. The validity was further confirmed by analysis of reference samples that were prepared by the inter-laboratory quality assurance program of the Korea Occupational Safety and Health Agency (KOSHA, Seoul, Korea). All measured concentrations of the analytes agreed with the certified values.