• Journal of the Korea Institute of Building Construction
• /
• v.4 no.1
• /
• pp.127-132
• /
• 2004

CFT(Concrete Filled Steel Tube) is a structure of circular or squared of steel column filled with concrete. The steel tube holds the concrete inside and that makes this structure to perform superior features on stiffness, proof stress, transformation, fire resistance and construction itself. In this study, by over the 800kgf/$\textrm{cm}^2$ of high strength concrete for CFT column, research has been done on the basic property of matter such as fluidity, resistance on segregation, compressive strength, setting icons of the concrete filled in the steel tube under conditions of standard weather. Physical properties of concrete for CFT that Concrete with silica fume, fly ash of air entraining and high-range water reducing agent, that used to CFT column research purpose to find the most ideal composition, which is achieved by the investigation in the concrete's property of matter like ability of Slump, Slump Flow, Air content, Bleeding, and Settlement. For this study, experiments which are bused on obtained the result through physical test are practiced, with all of the experiment, specimens only for control are produced in each method of curing and analyzed to relations with core strength in mock-up test. In mock-up test, the research is studied compactability of concrete filled in tube and degree of hydration hysteresis, as a basic reference for applying to field of CFT column which is used over 800kgf/$\textrm{cm}^2$ high strength concrete.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.1
• /
• pp.97-103
• /
• 2004

In case of a fire in road or railway tunnel it is always necessary to keep the escape condition as good as possible. Most of the victims of major fires in tunnels are because they couldn't leave the tunnel in time and were trapped by smoke, or rescue teams couldn't reach the place of the accident due to low visibility and high temperature. In spring 2003 a comprehensive field experiment was undertaken in a large scaled tunnel in Youngin City to test the effectiveness of a new water spray curtain system, designed to the air qualify inside of a tunnel in case of fire during passenger's escape to safe routes, In order to control the smoke propagation, fixed water sprayed nozzles were used to make water curtain system, which can be installed or hanging water piping line below ceiling. The experiment was accompanied by an extensive measurement campaign in order to measure temperature dropping effect and flow conditions as well as CO concentration for various water sprayed curtains produced by sprinkler heads or water spray nozzle. Eventually comparison analysis were undertaken to investigate the performance of water curtains under fixed water pressure. Therefore most effective water curtain system was presented on the basis of water droplet size in long tunnel.

• KSBB Journal
• /
• v.18 no.4
• /
• pp.301-305
• /
• 2003

The study of pancreatin extraction was investigated by supercritical fluid process. Using supercritical carbon dioxide extraction with entrainer the purification of pancreatin was possible to remove lipids from Hog pancreas. To observe the optimum conditions different experimental variables were changed as pressure, temperature, flow rate of solvent and 0.25 mm of sample size were evaluated for effective removal of lipids. Ethanol and n-hexane were used as an entrainer with 5 mL/min. Increasing pressure at constant temperature the efficiency of the lipid removal in Hog pancreas was improved and the protein was concentrated without denaturalization, compared that of the control Hog pancreas. The most efficient conditions of lipid elimination were 17 MPa of pressure and 35$^{\circ}C$ of temperature and 0.25 mm of sample size.

• The Korean Journal of Pain
• /
• v.6 no.1
• /
• pp.49-54
• /
• 1993

The use of intravenous patient-controlled analgesia is an effective and increasingly used means of providing postoperative pain relief. Recently a non-electric, disposable and portable infusor, the Baxter $Infusor^{(R)}$, has developed. This delivers not only a continuous drug infusion but can also deliver extradoses of medication on demand. The present study examined the benefits of two kinds of analgesics for pain management in 28 patients undergoing gynecological surgery. One group, 14 patients, received i.v. meperidine 0.5 mg/kg as loading dose in the recovery room and PCA with meperidine 3 mg/kg/day for 3 days only(M group). In the other group, 14 patients, also received i.v. meperidine 0.5 mg/kg as loading dose in the recovery room and PCA meperidine 3 mg/kg/day for 3 days and droperidol 5 mg(MD group). The PCA device used was the Baxter $Infusor^{(R)}$. This unit was fitted with patient control module which had a flow rate 0.5 ml/hr and the lockout time was 15 min. Resulting from the study, the MD patients in the first and second days post-operatively, reported less pain compared with the M group. VAPS(Visual Analogue Pain Scales) values were $3.52{\pm}l.61$ vs. $2.22{\pm}0.69$, $2.38{\pm}1.12$ vs. $1.45{\pm}0.48$ and $1.93{\pm}1.65$ vs. $0.98{\pm}0.36$, respectively pertaining to M and MD groups. In conclusion, the MD group with meperidine and droperidol(mixed regimen) provided more effective postoperative analgesia than M group(meperidine only).

• Journal of Pharmaceutical Investigation
• /
• v.30 no.4
• /
• pp.247-252
• /
• 2000

The advantages of transdermal administration are avoiding hepatic first pass effect, minimizing inter- and intra-patient variation, maintaining steady-state plasma level to provide long-term therapy from a single dose, and allowing a rapid termination of drug input. Clenbuterol, a selective ${\beta}_2-adrenergic$ receptor stimulant, has been introduced as a potent bronchodilator for patients with bronchial asthma, chronic obstructive bronchial disease. For the development of transdermal systems containing clenbuterol, two limiting factors - long lag time and low flux - must be overcome. In this study, we attempted to select optimal formulation for preparation of clenbuterol patch using hairless mouse skin and flow-through diffusion cell. The flux of clenbuterol increased as the percent of clenbuterol dose dependently in the concentration range of 5-15%. Based on this result, we fixed the concentration of clenbuterol as 15%. The effect of various penetration enhancers on percutaneous absorption of clenbuterol through hairless mouse skin was investigated. Labrafil was the most effective enhancer, which increased the permeability of clenbuterol approximately 4-fold compared with the control without penetration enhancer. Optimal enhancer concentration was 3%. The effect of various adhesives on penetration of clenbuterol was also investigated. Among the adhesives studied, MA-31 was the most effective adhesive. Furthermore, the clenbuterol patch composed of 15% clenbuterol, 3% Labrafil and 82% MA-31, which gave most excellent penetration of drug in in vitro penetration study, maintained therapeutic plasma levels in in vivo study using S.D. rats. These studies demonstrated a good feasibility of clenbuterol administration through the intact skin using a transdermal patch, and show a possibility of the development of clenbuterol patches.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.137-146
• /
• 2014

The geology of the study area which is located in Samkoe-dong, Dong-gu, Daejeon city comprises black slate, limestone, and pebble-bearing phyllitic rock as meta-sedimentary rocks; and biotite granite and quartz porphyry intrusions. Face mapping revealed sliding in three or four sites of contained coaly slate, where the dip of the foliation and other discontinuities is parallel to the surface slope. The cause of the slope sliding is this parallelism as well as the swelling of the coaly slate when wet. In contrast, the slop on the opposite side of the road is relatively stable because the dip of the foliation and other discontinuities are oblique or normal to the surface slope. To ensure slope stability, a cut-and-cover tunnel was designed and constructed for the new road.

• Journal of the Korean Society of Earth Science Education
• /
• v.9 no.1
• /
• pp.97-105
• /
• 2016

The purpose of this study was to examine the effects of storytelling skill on science concept and science learning motivation. For this study the 5 grade, 2 class was divided into a research group and a comparative group. The class was pre-tested in order to ensure the same standard. The research group had the science class with storytelling skill, and the comparative group had the class of the teacher centered lectures on 11 classes in 8 weeks. The storytelling skill was focused on set the astronomical target wants to set up a story, through the small group discussion, present subject of the story, set the protagonist of the story for smooth configuration of the story, in order to smooth the flow of the story, make up a story around a hero, to make a clear story, decorated with pictures, shapes, graphs, etc, group story, complete with an astronomical(saints) in storytelling. To prove the effects of this study, science concept was split up according to knowledge, inquiry, attitude. Also, science learning motivation consisted of assignment is worth, learning beliefs about control, self efficacy. The results of this study are as follows. First, using storytelling skill was effective in science concept. Second, using storytelling skill was effective in science learning motivation. Also, after using storytelling skill was good reaction by students. As a result, the elementary science class with storytelling skill had the effects of developing science concept and science learning motivation. It means the science class with storytelling skill has potential possibilities and value to develop science concept and science learning motivation.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.499-504
• /
• 2009

Erythrosine is used a food coloring, ink and dye, etc. but erithrosine is rarely used in United States due to its known hazards. The adsorption characteristics of erythrosine by granular activated carbon were investigated in the batch adsorber and the packed column. The adsorptivity of activated carbon for erythrosine were largely improved by pH control. When the pH was 11 in the sample, the erythrosine could be removed 98% of initial concentration. It was estabilished that the adsorption equilibrium of erythrosine on granular activated carbon was successfully fitted by Freundlich isotherm equation in the concentration range from 10mg/L to 1,000mg/L. The characteristics of breakthrough curve of activated carbon packed column depend on the design variables such as initial concentration, bed height, and flow rate.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.193-200
• /
• 2007

Natural gas is one of the most promising alternatives to gasoline and diesel fuels because of its lower harmful emissions, including $CO_2$, and high thermal efficiency. In particular, natural gas is seen as an alternative fuel for heavy-duty Diesel Engines because of the lower resulting emissions of PM, $CO_2$ and $NO_x$. Almost all CNG vehicles use the PFI-type Engine. However, PFI-type CNG Engines have a lower brake horse power, because of reduced volumetric efficiency and lower burning speed. This is a result of gaseous charge and the time losses increase as compared with the DI-type. This study was conducted to investigate the effect of injection conditions (early injection mode, late injection mode) on the combustion phenomena and performances in the or CNG Engine. A DI Diesel Engine with the same specifications used in a previous study was modified to a DI CNG Engine, and injection pressure was constantly kept at 60bar by a two-stage pressure-reducing type regulator. In this study, excess air ratios were varied from 1.0 to the lean limit, at the load conditions 50% throttle open rate and 1700rpm. The combustion characteristics of the or CNG Engine - such as in-cylinder pressure, indicated thermal efficiency, cycle-by-cycle variation, combustion duration and emissions - were investigated. Through this method, it was possible to verify that the combustion duration, the lean limit and the emissions were improved by control of injection timing and the stratified mixture conditions. And combustion duration is affected by not only excess air ratio, injection timing and position of piston but gas flow condition.

• Journal of Biomedical Engineering Research
• /
• v.35 no.5
• /
• pp.119-124
• /
• 2014

A Ventricular assist device (VAD) is one of the most efficient treatments to raise the survivability of the end stage heart failure patient. However, some of LVAD patients have died for the failures and improper control of LVAD. To detect critical dangers in LVAD, the monitoring methods of LVAD outflow have been requested, because it can be affected by patient's hemodynamic states and abnormal conditions of LVAD. In the case of an external pulsatile LVAD, the air movement through the air line can be used to estimate LVAD outflow. In this study, the air movement in the air-line of the extracorporeal pulsatile LVAD was measured with a differential pressure sensor between different points. The precise estimation of air movement could be achieved by additional measurement of air pressure. In a series of in-vitro experiments, the LVAD outflow were changed according to the afterload of LVAD and the differential pressure of LVAD didn't have close correlation with the LVAD outflow that were measured with an ultrasonic flowmeter at the same time. However, new precise estimation with the data from differential pressure and one point pressure in the air-line showed higher correlations with LVAD outflow.