• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.512-516
• /
• 2012

Recently the Korean government's green energy growth policy has been taken at the national level due to the sufficient supply of renewable energy. Some specific technique should be taken in consideration for the operation of the grid voltage and power quality management. In this case, there may have some chance of operational problems. Typical problems arise when grid-connected solar power produced by Pacific sunshine. The power flow in the reverse direction can create overvoltage on the distribution line and gives value of malfunction on the system. Line voltage and overvoltage adjustment practice can stop these symptoms occurred. Under these circumstances, this paper presents an interconnection test devices for photovoltaic(PV) systems composed of distribution system simulator, PV system simulator and control and monitoring systems using the LabVIEW S/W, and simulates the customer voltage characteristics considering the 3 parameters on the introduction capacity for PV systems, system configuration and Power factor. This paper also proposes a new calculation algorithm for voltage profile to make comparison between calculation values and test device values. The results show that the simulation results for the normal operation characteristics of PV systems which are very practical and effective.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.3
• /
• pp.179-192
• /
• 2007

Based on ontologies, semantic Web services enable the discovery, selection, and composition. OWL-S is a do facto standard ontology for describing semantics of Web services. Due to the difficulty of the OWL-S grammar, the teaming curve for constructing OWL-S description manually can be steep. This paper presents an efficient method for generating OWL-S descriptions from UML diagrams, which are widely used for software design and development. The proposed method is based on UML profiles to generate an OWL-S ontology from sequence or activity diagrams, which represent the behavior of a business process. Specifically, an XMI file extracted from UML diagrams is transformed into an OWL-S description via an XSLT script. Experimental results with a large volume of UML diagrams show that the proposed method deals with the control flow of complex processes and is superior to previous methods.

• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.83-93
• /
• 2016

For the continuous stable production of oyster, estimation of food availability (F) was carried out in Goseong Bay, south of coast Korea. Primary productivity ranged from 0.07 to $0.44gC/m^2/day$ (average $0.25gC/m^2/day$), lowest in July and highest in January. The distribution of primary productivity at Goseong Bay showed the pattern of "high in the south and low in the north." Food availability (F) was $F{\leq}0$, indicating insufficient food supply, from August to November and F > 0 from January to April. Continuous insufficient food supply was observed at 18 oyster farms in the southern part of the bay and 4 in its northern part. Mortality at the oyster farms was 56% on the average, and around 58% of death occurred during November when food supply was insufficient. The optimal population of cultured oyster per unit flow area was calculated to be $110-115indiv./m^2$ (198-201 indiv./string). When the sea area was divided into 3 regions (A, B, C) according to carrying capacity, the carrying capacity of (A) regions was $52-53indiv./m^2$ (93-95 indiv./string), (B) regions was $142-144indiv./m^2$ (255-259 indiv./string), and (C) regions was $198-202indiv./m^2$ (356-363 indiv./string). In particular, (A) regions showed extremely low productivity. For continuous stable oyster farming at Goseong Bay, it is necessary to control point and non-point source pollution through continuous environmental monitoring and to adjust harvest according to the base carrying capacity during the season of high water temperature.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.53-59
• /
• 2010

This research aims in finding a more optimal ejector size for evacuating engine exhaust gasses and 20% of the cell cooling air. The remaining 80% of cell cooling air pumped into the test chamber is separately exhausted from the test chamber via a discharge port fitted with flow control valves and vacuum pump. Unlike its predecessor this configuration utilizes a smaller capture area to improve pressure recovery. The modified ejector size has a diameter of 1100mm enough to evacuate 66kg/s jet engine exhaust in addition to about 20%, 24kg/s of the cell cooling air tapped from the sterling chamber. This configurations has an area ratio of the engine exit and ejector inlet of about 1.2. Simulation results of the proposed ejector configuration, indicates improved pressure recovery.

• Computers and Concrete
• /
• v.12 no.2
• /
• pp.131-149
• /
• 2013

Various types of reinforcement splicing methods have been developed and implemented in reinforced concrete construction projects for achieving the continuity of reinforcements. Due to the complicated reinforcement arrangements and the difficulties in securing bar spacing, the traditional lap splicing method, which has been widely used in reinforced concrete constructions, often shows low constructability and difficulties in quality control. Also, lap spliced regions are likely to be over-reinforced, which may not be desirable in seismic design. On the other hand, mechanical splicing methods can offer simple and clear arrangements of reinforcement. In order to utilize the couplers for the ribbed-deformed bars, however, additional screw processing at the ends of reinforcing bars is typically required, which often lead to performance degradations of reinforced concrete members due to the lack of workmanship in screw processing or in adjusting the length of reinforcing bars. On the contrary, the use of screw-ribbed reinforcements can easily solve these issues on the mechanical splicing methods, because it does not require the screw process on the bar. In this study, the mechanical coupler suitable for the screw-ribbed reinforcements has been developed, in which any gap between the reinforcements and sleeve device can be removed by grouting high-flow inorganic mortar. This study presents the uniaxial tension tests on the screw-ribbed reinforcement with the mechanical sleeve devices and the cyclic loading tests on RC columns with the developed coupler. The test results show that the mechanical sleeve connection developed in this study has an excellent splicing performance, and that it is applicable to reinforced concrete columns with a proper confinement by hoop reinforcement.

• Advances in nano research
• /
• v.5 no.3
• /
• pp.261-279
• /
• 2017

Spectroscopic investigation of Si quantum dots (Si-QDs) embedded in silicon nitride was performed over a broad stoichiometry range to optimize light emission. Plasma-enhanced chemical vapor deposition was used to grow the $SiN_x$ films on Si (001) substrates. The film composition was controlled via the flow ratio of silane ($SiH_4$) and ammonia ($NH_3$) in the range of R = 0.45-1.0 allowed to vary the Si excess in the range of 21-62 at.%. The films were submitted to annealing at $1100^{\circ}C$ for 30 min in nitrogen to form the Si-QDs. The properties of as-deposited and annealed films were investigated using spectroscopic ellipsometry, Fourier transform infrared spectroscopy, Raman scattering and photoluminescence (PL) methods. Si-QDs were detected in $SiN_x$ films demonstrating the increase of sizes with Si excess. The residual amorphous Si clusters were found to be present in the films grown with Si excess higher than 50 at.%. Multi-component PL spectra at 300 K in the range of 1.5-3.5 eV were detected and nonmonotonous varying total PL peak versus Si excess was revealed. To identify the different PL components, the temperature dependence of PL spectra was investigated in the range of 20-300 K. The analysis allowed concluding that the "blue-orange" emission is due to the radiative defects in a $SiN_x$ matrix, whereas the "red" and "infrared" PL bands are caused by the exciton recombination in crystalline Si-QDs and amorphous Si clusters. The nature of radiative and no radiative defects in $SiN_x$ films is discussed. The ways to control the dominant PL emission mechanisms are proposed.

• Wind and Structures
• /
• v.25 no.1
• /
• pp.79-100
• /
• 2017

The use of wind energy resources is developing rapidly in recent decades. There is an increasing number of wind farms in high wind-velocity areas such as the Pacific Rim regions. Wind turbine towers are vulnerable to tropical cyclones and tower failures have been reported in an increasing number in these regions. Existing post-disaster failure case studies were mostly performed through forensic investigations and there are few numerical studies that address the collapse mode simulation of wind turbine towers under strong wind loads. In this paper, the wind-induced failure analysis of a conventional 65 m hub high 1.5-MW wind turbine was carried out by means of nonlinear response time-history analyses in a detailed finite element model of the structure. The wind loading was generated based on the wind field parameters adapted from the cyclone boundary layer flow. The analysis results indicate that this particular tower fails due to the formation of a full-section plastic hinge at locations that are consistent with those reported from field investigations, which suggests the validity of the proposed numerical analysis in the assessment of the performance of wind-farms under cyclonic winds. Furthermore, the numerical simulation allows to distinguish different failure stages before the dynamic collapse occurs in the proposed wind turbine tower, opening the door to future research on the control of these intermediate collapse phases.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.22
• /
• pp.10015-10020
• /
• 2014

Background: Fentanyl is used as an analgesic to treat pain in a variety of patients with cancer and recently it has become considered to also act as an antitumor agent. The study present was designed to investigate the effects of fentanyl on colorectal cancer cell growth and plausible mechanisms. Materials and Methods: The human colorectal carcinoma cell line HCT116 was subcutaneously injected into nude mice. The viability of HCT116 was tested by MTT assay, and apoptosis by flow cytometry and caspase-3 activity. The expression of Sirt1 and NF-${\kappa}B$ were evaluated by Western blotting and the levels of Sirt1 and NF-${\kappa}B$ by fluorescence method. SiRNA was used to silence and Ad-Sirt1 to overexpress Sirt1. Results: Our data showed that fentanyl could inhibit tumor growth, with increased expression of Sirt1 and down-regulation of Ac-p65 in tumors. Compared with control cells without treatment, HCT116 cells that were incubated with fentanyl had a higher apoptotic rate. Moreover, fentanyl could increase expression and activity of Sirt1 and inhibitor expression and activity of NF-${\kappa}B$, which might be mechanisms of fentanyl action. Conclusions: Fentanyl increased colorectal carcinoma cell apoptosis by inhibition of NF-${\kappa}B$ activation in a Sirt1-dependent manner.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10079-10083
• /
• 2015

Background: Endothelin-1 and Endostar are both significant for the progression, proliferation, metastasis and invasion of cancer. In this paper, we studied the effect of ET-1 RNAi and Endostar in PC-3 prostatic cancer cells. Materials and Methods: The lentiviral vector was used in the establishment of ET-1 knockdown PC-3 cells. Progression and apoptosis were assessed by CKK-8 and flow cytometry, respectively. Transwell assay was used to estimate invasion and signaling pathways were studied by Western blotting. Results: ET-1 mRNA and protein in ET-1 knockdown PC-3 cells were reduced to 26.4% and 22.4% compared with control group, respectively. ET-1 RNAi and Endostar both were effective for the suppression of progression and invasion of PC-3 cells. From Western blotting results, the effects of ET-1 regulation and Endostar on PC-3 cells were at least related to some signaling pathways involving PI3K/Akt/Caspase-3, Erk1/2/Bcl-2/Caspase-3 and MMPs (MMP-2 and MMP-9). Furthermore, combined treatment of ET-1RNAi and Endostar was found to be more effective than single treatment. Conclusions: Both ET-1 RNAi and Endostar can inhibit the progression and invasion of PC-3 cells, but combined treatment might be a better therapeutic schedule.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2765-2770
• /
• 2012

Background: There is a long standing interest in the identification of medicinal plants and derived natural products for developing cancer therapeutics. Here we investigated the antiproliferative properties of Melissa officinalis (MO) from Turkey on breast cancer. Methods: MO extracts were studied for cytotoxicity against breast cancer cell lines (MCF-7, MDA-MB-468 and MDA-MB-231). In vitro apoptosis studies were performed by annexin V staining and flow cytometry analyses. Immunohistochemistry for Ki-67 and caspase 7 in the tumoral tissue sections of DMBA-induced mammary tumors in rats was also performed, along with TUNEL assays to detect apoptotic cells. In vivo anticancer activity testing was carried out with reference to inhibition of growth of DMBA induced mammary tumors in rats. Results: MO showed cytotoxicity against three cancer cell lines, inducing increase in Annexin-positive cells. Expression of caspase-7 protein and TUNEL positive cells were much higher in rats treated by MO, compared with the untreated control group, while expression of Ki-67 was decreased. Furthermore, in vivo studies showed that mean tumor volume inhibition ratio in MO treated group was 40% compared with the untreated rats. Conclusion: These results indicated that MO extrcts have antitumoral potential against breast cancer.