• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.6
• /
• pp.491-495
• /
• 2007

This paper has demonstrated the electrical properties of SiGe pMOSFETs fabricated on both bulk-Si and PD SOI substrates. Two principal merits, the mobility increase in strained-SiGe channel and the parasitic capacitance reduction of SOI isolation, resulted in improvements in device performance. It was observed that the SiGe PD SOI could alleviate the floating body effect, and consequently DIBL was as low as 10 mV/V. The cut-off frequency of device fabricated on PD SOI substrate was roughly doubled in comparison with SiGe bulk: from 6.7 GHz to 11.3 GHz. These experimental result suggests that the SiGe PD SOI pMOSFET is a promising option to drive CMOS to enhance performance with its increased operation frequency for high speed and low noise applications.

• Ocean Systems Engineering
• /
• v.9 no.1
• /
• pp.21-42
• /
• 2019

In this paper, the Finite-Analytic Navier-Stokes (FANS) code is coupled with an in-house finite-element code to study the dynamic interaction between a floating buoy and its mooring system. Hydrodynamic loads on the buoy are predicted with the FANS module, in which Large Eddy Simulation (LES) is used as the turbulence model. The mooring lines are modeled based on a slender body theory. Their dynamic responses are simulated with a nonlinear finite element module, MOORING3D. The two modules are coupled by transferring the forces and displacements of the buoy and its mooring system at their connections through an interface module. A free-decay model test was used to calibrate the coupled method. In addition, to investigate the capability of the present coupled method, numerical simulations of two degree-of-freedom vortex-induced motion of a CALM buoy in uniform currents were performed. With the study it can be verified that accurate predictions of the motion responses and tension responses of the CALM buoy system can be made with the coupling CFD-FEM method.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1231-1240
• /
• 2019

Unlike land-based nuclear power plants, a marine or floating reactor is affected by external forces due to ocean conditions. These external forces can cause additional accelerations and affect each system and equipment of the marine reactor. Therefore, in designing a marine reactor and evaluating its performance and stability, a thermal hydraulic safety analysis code is necessary to consider the thermal hydrodynamic effects of ship motion. MARS, which is a reactor system analysis code, includes a dynamic motion model that can simulate the thermal-hydraulic phenomena under three-dimensional motion by calculating the body force term included in the momentum equation. In this study, it was verified that the dynamic motion model can simulate fluid motion with reasonable accuracy using conceptual problems. In addition, two modifications were made to the dynamic motion model; first, a user-supplied table to simulate a realistic ship motion was implemented, and second, the flow regime map determination algorithm was improved by calculating the volume inclination information at every time step if the dynamic motion model was activated. With these modifications, MARS could simulate the thermal-hydraulic phenomena under ocean motion more realistically.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.439-441
• /
• 2021

The number of bedsores patients is increasing every year due to the aging society, and the importance of bedsores management is emerging as a burden on nurses due to the pandemic situation of COVID-19. Curses are a disease that causes ulcers due to floating posture, and it is a disease that is burdensome for nurses to periodically change their body position. Therefore, this study proposes a system that can reduce the burden on nurses by detecting the risk of inducing bedsores and monitoring the status of calls in real time. Through this system, it will be possible to increase nursing work by solving the difficulties of nursing in the bedsores of nurses.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.5
• /
• pp.512-518
• /
• 2024

Titanium oxide (TiO₂), a representative photocatalyst, reacts to ultraviolet ray energy and has antibacterial, deodorizing, and antifouling properties using superhydrophilic properties, so it is widely used in various industrial fields such as environmental purification, building exterior walls, and road facilities. However, due to the nature of the photocatalyst, it reacts to ultraviolet rays known to be harmful to the human body, and is designed to react to natural light outdoors and to ultraviolet light sources inside a sealed device indoors, so indoor space is extremely limited. This study aims to develop spatial antibacterial technology for everyday living spaces by researching methods for antibacterial and deodorization by reacting titanium oxide (TiO₂)-based photocatalysts with the visible light range emitted from lighting devices in everyday spaces. Through the results of this study, it was verified through experiments that the photocatalyst exhibits antibacterial and deodorizing properties in response to lighting devices (LED, fluorescent lights, etc.) used in daily life. Based on the research results, we hope that various studies will be conducted to create a safer living environment by applying this technology to various fields such as large-scale complex facilities where an unspecified number of floating populations gather, airports, port waiting rooms, and public transportation.

• Applied Microscopy
• /
• v.32 no.4
• /
• pp.319-327
• /
• 2002

Salvinia natans, an unique water fern having a small rootless body, developed three different types of trichomes throughout the plant. The most peculiar type exhibiting rows of obvious, whitish, multicellular trichome clusters was noticed in the upper surface of the floating leaves. Eight to ten branches within a cluster extended ca. $370{\sim}420{\mu}m$ from the leaf surface. No stalk cell was found, however, four large epidermal cells were discernable at the base of four central branches in the cluster. Each branch consisted of $8{\sim}10$ obliquely-oriented small cells that gradually decreased in size toward the branch tip. The second type was found in the lower surface of the floating leaves, stems, and sporocarps. Multicellular uniseriate trichomes, ca. $430{\sim}980{\mu}m$ long, were distributed all over these structures. The tip of trichome was acicular, but a semi-spheric protuberance of approximately $24{\sim}32{\mu}m$ in diameter occurred at the base of each trichome. The protuberance appeared to be firmly attached to the side of the basal cell, however, internal connection to the trichome cell itself was uncertain. The third type was similar to the second in that multicellur uniseriate trichomes with acicular tip and a protuberance at the base were present. However, the trichomes were considerably long relative to the second type, and only occurred along the surface of highly dissected, submerged leaves. A majority of the trichomes exceeded more than 2 mm in length that hung downward in the water. Regardless of trichome type, all trichomes contained a huge central vacuole with very thin cytoplasm, resulting from the fusion of several vacuoles during early trichome development. The various densely-distributed trichomes formed in Salvinia natans probably play an important role in plant buoyancy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.5
• /
• pp.802-807
• /
• 2002

This study was conducted to see effects of dietary bacterial fiber produced by Gluconoucetobacter hansenii on gross structure, and disaccharidase activities of small intestine and body lipid status in rats. Bacterial fiber was prepared by drying and alkali treatment of floating membrane produced IS days after the bacterial culture using coconut juice media. Male Sprague-Dawely rats of 320+10 g were grouped into three and fed 0.5% (w/w) cholesterol diets with three different dietary fibers, i .e. cellulose, and pectin and bacterial fiber, at the level of 2% (w/w). During four-week experimental period, food intakes and body weight gains were not different among three groups. Total lengths and jejunal fragment weights of small intestine did not differ among the three groups but cecal weight was higher in bacterial fiber groups than those of the other two groups. Colon content and fecal dry weight were lower in bacterial fiber group. Sucrase activity of the jejunal mucosa was lower in bacterial fiber group but maltase activity was not different from those of the other two groups. Plasma total cholesterol level was lower and that of HDL-cholesterol higher in pectin group than those of cellulose and bacterial fiber groups, the latter of which did not differ. Both in plasma and liver triglyceride levels were lower in bacterial fiber group than cellulose and pectin groups, and liver cholesterol level was lower in pectin group. Relative liver weights and Plasma activities of GOT md GPT were not different among three groups. It is concluded that bacterial fiber used in the present study had hypotriglyceridemic effect that help improve lipid status in the body.

• Korean Journal of Ecology and Environment
• /
• v.52 no.4
• /
• pp.293-305
• /
• 2019

In this study we investigated the effect of a floating photovoltaic (FPV) system in Cheongpung Lake on water quality. The FPV with a tilt angle of 33° covered ca. 0.04% of surface area (97 ㎢) of Chungju Lake. The water qualities of the whole lake before and after installation of FPV were first compared. DO, BOD, TOC, and Chl-a of the whole lake were increased, while conductivity decreased after installation period at the significance level of 0.05. This change was probably due to the increased influx of nutrients by 40% resulting from increased precipitation during the same period. We also measured water quality parameters on May and Nov. 2017 at the FPV center (FPVC) and nearby control sites, and compared water quality. The result showed that the FPVC and nearby sites were not significantly different (p>0.05), demonstrating that the FPV does not cause a decline of water quality. The water temperature, light intensity, and phytoplankton community were also measured. The water temperature was not different between the sites, while the light intensity decreased to 27~50%. Despite reduced light intensity at FPVC, the phytoplankton standing crops and the number of species were not significantly different (p>0.05). However, in the early November samples, standing crops was significantly higher in FPVC than control with periphytic diatoms belonging to Aulacoseira genus being dominant. This may be due to the temporal water body behavior or local retention of current by FPV system. This study may provide a measure of future installation of a FPV system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.4
• /
• pp.235-243
• /
• 1991

This paper is concerned with developing infinite elements which are applicable to wave diffraction and radiation problems in the vertical plane. The near need region surrounding the solid body is modeled using conventional finite elements. but the far fold region is represented using the infinite elements developed in this study. The shape functions for the infinite elements are derived from the analytical eigenseries solution of the scattered waves in the far field region. The system matrices of the elements are constructed by performing the integration in the infinite direction analytically to achieve computational efficiency. Numerical analysis is carried out for two floating bodies with different cross-sectional shapes to prove the efficiency and validity of the elements. Numerical experiments are also performed to determine the suitable location of the infinite elements which directly affect accuracy and efficiency of the solution.

• Korean Institute of Interior Design Journal
• /
• v.23 no.6
• /
• pp.51-59
• /
• 2014

Rem Koolhaas has pursued new architectural approaches breaking with conventional ones. Around the 1990s when large-scale projects occurred with the union of Europe ahead, Koolhaas recognized the limits to the existing methods for responding to such changes. Accordingly, he came to use design methods based on 'congestion' and 'void' as strategical alternatives, which became the moment for him to leap forward from the previous working sphere based in Europe to becoming an architect who would be commissioned a number of large-scale global projects. Therefore, this study intends to investigate his design methods which utilized congestion and void, and to derive spatial characteristics from the projects based on such methods. First of all, the study looked into the historical background, definition and process of congestion and the void as design methods, and analyzed his projects to which such methods were applied by classifying them into the following categories: 1) the void that removes a space of singularity; 2) the void that penetrates space while making a flow; and 3) the void that is formed by vertical extrusion. Then, the characteristics of architectural spaces made in this way were identified as 1)the single-body appearance made by congestion and the following types of space made by the void: 2) the non-uniformly shaped space that looks like floating; 3) the flexible space with various flows and directions; and 4) the space with virtual possibilities that embrace contingent events. This understanding of Rem Koolhaas's design methods which were attempted in various ways at his critical turning point will be the foundation to understand the overall world of his works.