• 한국방재학회 논문집
• /
• 제7권5호
• /
• pp.11-18
• /
• 2007

고인성 섬유보강 시멘트 모르터의 휨피로 거동을 규명하고자 실내실험을 실시하였다. 정적 휨실험과 휨피로 실험을 위해 섬유혼입율에 따라 5개의 시험체와 14개의 시험체를 각각 제작하였다. 휨피로 시험에 앞서서 정적 파괴하중과 응력수준을 결정하기 위하여 정적 휨시험이 실시되었다. 피로응력수준과 섬유혼입율에 따른 휨피로 거동을 분석하였으며 휨피로응력수준과 파괴시 하중반복회수와의 상관관계식을 제안하였다.

• 한국농공학회지
• /
• 제44권2호
• /
• pp.117-126
• /
• 2002

Concrete containing discontinuous discrete steel fiber in a normal concrete is called steel fiber reinforced concrete(SFRC). Tensile as well as flexural strengths of concrete could be substantially increased by introducing closely spaced fibers which delay the onset of tension cracks and increase the tension strength of cracks. However, many properties of SFRC have not been investigated, especially properties on repeated loadings. Thus, the purposes of this dissertation is to study the flexural fatigue characteristics of SFRC considering cumulative damage. A series of experimental tests such as compressive strength, splitting tensile strength, flexural strength, flexural fatigue, and two steps stress level fatigue were conducted to clarify the basic properties and fatigue-related properties of SFRC. The main experimental variables were steel fiber fraction (0, 0.4, 0.7, 1, 1.5%), aspect ratio (60, 83). The principal results obtained through this study are as follows: The results of flexural fatigue tests showed that the flexural fatigue life of SFRC is approxmately 65% of ultimate strength, while that of plain is less than 58%. Especially, the behavior of flexural fatigue life shows excellent performance at 1.0% of steel-fiber volume fraction. The cumulative damage test of high-low two stress levels is within the value of 0.6 ∼ 1.1, while that of low-high stress steps is within the value of 2.4 ∼ 4.0.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1531-1548
• /
• 2015

The aim of this study is to investigate the relationship between Barcol hardness (H) and flexural modulus (E) degradation of composite sheets subjected to flexural fatigue. The resin transfer molding (RTM) method was used to produce 3-mm-thick composite sheets with fiber volume fraction of 44%. The composite sheets were subjected to flexural fatigue tests and Barcol scale hardness measurements. After these tests, the stiffness and hardness degradations were investigated in the composite sheets that failed after around one million cycles (stage III). Flexural modulus degradation values were in the range of 0.41-0.42 with the corresponding measured hardness degradation values in the range of 0.25-0.32 for the all fatigued composite sheets. Thus, a 25% reduction in the initial hardness and a 41% reduction in the initial flexural modulus can be taken as the failure criteria. The results showed that a reasonably well-defined relationship between Barcol hardness and flexural modulus degradation in the distance range.

• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.925-946
• /
• 2015

This paper presents a new cost-effective hybrid GFRP-Concrete deck system that the GFRP panel serves as both tensile reinforcement and stay-in-place form. In order to understand the fatigue behavior of such hybrid deck, fatigue test on a full-scale specimen under sagging moment was conducted, and a series of static tests were also carried out after certain repeated loading cycles. The fatigue test results indicated that such hybrid deck has a good fatigue performance even after 3.1 million repeated loading cycles. A three-dimensional finite element model of the hybrid deck was established based on experimental work. The results from finite element analyses are in good agreement with those from the tests. In addition, flexural fatigue analysis considering the reduction in flexural stiffness and modulus under cyclic loading was carried out. The predicted flexural strength agreed well with the analytical strength from finite element simulation, and the calculated fatigue failure cycle was consistent with the result based on related S-N curve and finite element analyses. However, the flexural fatigue analytical results tended to be conservative compared to the tested results in safety side. The presented overall investigation may provide reference for the design and construction of such hybrid deck system.

• Korean Chemical Engineering Research
• /
• 제62권4호
• /
• pp.355-363
• /
• 2024

공중합 아라미드는 기존의 파라계 아라미드의 단점인 낮은 신축성을 개선한 섬유로서 굴곡 성능이 우수한 특성을 갖고있지만 굴곡피로 성능을 평가할 수 있는 평가법은 부재한 실정이다. 현재 국내에서는 공중합 아라미드 개발을 위해 다양한 연구가 진행되고 있으며 아라미드의 신뢰성을 세계적 수준까지 발전시키기 위해서는 굴곡성능을 평가할 수 있는 평가법 개발이 필요한 상황이다. 본 연구에서는 공중합 아라미드의 굴곡피로성능을 평가할 수 있는 평가장치와 평가법을 개발하고 아라미드의 굴곡피로성능을 분석하였다. 굴곡피로시험기의 굴곡부는 마찰을 최소화 하기 위해 롤러 재질을 세라믹 재질로 선정하였으며 롤러 형태는 회전형태로 제작하였다. 롤러의 직경은 최소허용곡률을 계산하여 10 mm로 선정하였다. 굴곡피로시험을 통해 B₁₀ 수명을 산출하였으며 파라계 아라미드는 125,770회, 공중합 아라미드 598,150회, ANF(Aramid Nano Fiber)로 표면처리한 공중합 아라미드는 589,073회로 나타내었다. S-N선도를 통해 하중 변화에 따른 피로 수명 관계를 파악하였으며 고하중 조건에서도 공중합 아라미드 가 파라계 아라미드 보다 우수한 굴곡피로 성능을 나타내고 ANF로 표면처리한 공중합 아라미드 또한 우수한 굴곡 피로 성능을 나타내는 것을 확인하였다.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.469-478
• /
• 2020

This study aims to establish a new methodological framework for the evaluation of the evolution of the reliability of plain concrete for pavement vs number of cycles under flexural fatigue loading. According to the framework, a new method calculating the reliability was proposed through probability simulation in order to describe a random accumulation of fatigue damage, which combines reliability theory, one-to-one probability density functions transformation technique, cumulative fatigue damage theory and Weibull distribution theory. Then the statistical analysis of flexural fatigue performance of cement concrete tested was carried out utilizing Weibull distribution. Ultimately, the reliability for the tested cement concrete was obtained by the proposed method. Results indicate that the stochastic evolution behavior of concrete materials under fatigue loading can be captured by the established framework. The flexural fatigue life data of concrete at different stress levels is well described utilizing the two-parameter Weibull distribution. The evolution of reliability for concrete materials tested in this study develops by three stages and may corresponds to develop stages of cracking. The proposed method may also be available for the analysis of degradation behaviors under non-fatigue conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.401-406
• /
• 2002

The purpose of this research was to obtain fatigue property of pavement concrete by flexural fatigue test. The size of specimen used in fatigue tests was 10$\times$10$\times$46cm. The specimens of pavement concrete were fabricated using the concrete at job site. The fatigue tests were performed by applying into a constant amplitude loading. The flexural fatigue tests were performed by stress levels of 90%, 80%, 70% and 60%, and stress ratio of 0.1. From this research, the S-N relationship, S-N-P relationship were derived and Weibull probability density functions was plotted using the distribution parameters.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.1-4
• /
• 2001

A new non-destructive fatigue prediction model of the composite laminates is developed. The natural frequencies of fatigue-damaged laminates under extensional loading are related to the fatigue lift of the laminates by establishing the equivalent flexural stiffness reduction as a function of the elastic properties of sublaminates. The flexural stiffness is derived by relating the $90^{\circ}$-ply elastic modulus reduction, and using the laminate plate theory to the degraded elastic modulus and the intact elastic modulus of other laminate. The natural frequency reduction model, in which the dominant fatigue mode can be identified from the sensitivity scale factors of sublaminate elastic properties, provides natural frequency vs. fatigue cycle curves for the composite laminates. Vibration tests were also conducted on $[\textrm{90}_{2}\textrm{0}_{2}]_s$ carbon/epoxy laminates to verify the natural frequency reduction model. Correlations between the predictions of the model and experimental results are good.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.623-624
• /
• 2006

The behavior of hardmetals under cyclic loads is investigated. Unnotched specimens were employed to obtain practical information regarding fatigue in hardmetals. All the tested hardmetals exhibit an increase in the number of cycles until failure with a decrease in the maximum stress, i.e., the hardmetals exhibit a high fatigue sensitivity. The fatigue strength increases with the cobalt content. Although distinct fatigue limits, as observed in metals, cannot be observed, the calculated fatigue limit stress at $10^7$ cycles is found to be approximately 70% of the flexural strength, and the stress value exhibits a linear relationship with the flexural stress.

• 대한토목학회논문집
• /
• 제6권2호
• /
• pp.103-109
• /
• 1986

본(本) 논문(論文)에서는 작용되는 피로하중의 크기에 따른 콘크리트의 피로수명분포를 연구(硏究)하였다. 콘크리트보에 대하여 휨피로 실험을 수행하였으며, 피로응력의 크기는 세 가지로서 정적휨강도의 각각 85%, 75% 및 65%로 하여 피로수명을 측정하였다. 본 연구의 실험결과 피로하중의 크기에 따라 확률분포함수의 형태가 비교적 크게 달라짐을 발견하였으며, 이것은 콘크리트의 피로신뢰해석시 피로하중의 크기에 대한 영향을 고려해야 함을 말해 주고 있다. 분포매개변수의 결정은 도식법, 모멘트법 및 Maximum Likelihood 방법에 의거하였다. 콘크리트의 휨피로수명의 Weibull 분포(分布) 형상매개변수는 하중의 크기에 따라 2.0~4.0의 범위에 있는 것으로 나타났다.