• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.299-303
• /
• 2015

Flexible space is an adaptable space that has been increasingly used in many office and academic buildings as it increases the use of the space available and reduces the unnecessary building area. However, the architectural, engineering and construction (AEC) industry lacks a formalized method that helps architects predict and update the space utilization of flexible space during the project development, as such prediction aims to maximize the use of the building space available without exceeding the target utilization policy. Consequently, current manual utilization prediction results in lower accuracy level and limits the maximized use of the flexible space, which has multiple space-use types that affect the prediction of utilization. To address this problem, we identified eight space-use type differentiators (SUTDs) based on the literature review and observations and discussed the use of them in automated space-use analysis (SUA), which can predict the utilization of flexible space via a computer program. This research builds on SUA and contributes to flexible space planning by providing a means of a more comprehensive and accurate SUA.

• Journal of Communications and Networks
• /
• 제8권2호
• /
• pp.144-150
• /
• 2006

A serious problem with traditional 'command & control' spectrum management techniques is that they do not easily accommodate new technologies and new services. This paper describes the necessary principles of flexible-use spectrum rights which may allow a wide variety of spectrum uses in a single general-purpose band. Based on the electrospace description of the radio spectrum, these principles allow general aggregation or division of licensed electrospace regions via secondary markets, providing rules for how regulatory limits change under aggregation or division. These flexible-use principles limit transmitter behaviors that tend to create a more difficult operating environment for receivers, while making receivers responsible for handling any remaining interference. The author shows how flexible-use principles could provide a basis for real-world flexible-use frequency bands.

• Architectural research
• /
• 제22권4호
• /
• pp.145-154
• /
• 2020

Zoning has long been criticized for its negative effects and has been taken for granted that zoning works as a hurdle to urban diversity. Responses in the US have emphasized more fine-grained zoning approaches that plan mixed use. This paper introduces and evaluates Seoul's zoning system as a possible alternative. While US zoning regulations have relied on distinguishing ever larger numbers of land use zoning categories, Seoul has opted to integrate new land uses into existing classifications, allowing for greater flexibility of use in each zone. Using municipal building records to evaluate land use in three mid-density residential districts, this paper demonstrates that Seoul's flexible zoning is capable of producing diverse mixed use neighborhoods. It then highlights the potential downside of this approach, showing that flexibility allows for the commercialization and sectoral gentrification of residential districts. It concludes by suggesting that a combination of flexible zones and more fine-grained plans would capture the advantages of both US and Korean planning.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.353-353
• /
• 2000

To control a light weight flexible manipulator, a composite fuzzy controller is proposed. The controller is designed based on two time scaled models. A singular perturbation technique is applied for deriving the models. The proposed controller, however, does not use the complex equilibrium manifold equations, which are usually needed in the controller based on the two time scaled models. The controller for a slow sub-model and a fast sub-model are T-S type fuzzy controllers, which use 3 linguistic variables for each sub-model. A step trajectory is used in simulations as a reference trajectory of joint motions. The results of simulations with the proposed controller show excellent damping of flexible motions compared to a controller with derivative control of flexible motions.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.113-122
• /
• 2014

The objective of the paper is to clarify a methodology based on the use of the existing component mode synthesis methods for the case of two damped substructures which are coupled through a linking viscoelastic flexible substructure and for which the structural modes with free geometrical interface are used for each main substructure. The proposed methodology corresponds to a convenient alternative to the direct use either of the Craig-Bampton method applied to the three substructures (using the fixed geometric interface modes) or of the flexibility residual approaches initiated by MacNeal (using the free geometric interface modes). In opposite to a geometrical interface which is a topological interface on which there is a direct linkage between the degrees of freedom of substructures, we consider a physical flexible interface which exists in certain present technologies and for which the general framework linear viscoelasticity is used and yields a frequency-dependent damping and stiffness matrices of the physical flexible interface.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.62-65
• /
• 2018

In the era of the 4th Industrial Revolution, IoT products of various and specialized fields are being developed and produced. Especially, the generation of the artificial intelligence, robotic technology Multilayer substrates and packaging technologies in the notebook, mobile device, display and semiconductor component industries are demanding the need for flexible materials along with miniaturization and thinning. To do this, this work use FCCL (Flexible Copper Clad Laminate), which is a flexible printed circuit board (PCB), to implement FPCB (Flexible PCB), COF (Chip on Film) Use is known to be essential. In this paper, I propose a transfer device which prevents the occurrence of scratches by analyzing the mechanism of wrinkle and scratch mechanism during the transfer process of thin film material in which the thickness increases while continuously moving in air or solution.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1718-1723
• /
• 2003

This paper presents a computational method for deformation modes of a flexible body in multibody system from the experimental modal analysis and an efficient method for flexible multibody dynamic analysis by use of the modes. It is difficult to directly use experimental modal parameters in flexible multibody dynamic analysis. The major reasons are that there are many inconsistencies between experimental and analytical modal data and experimental noises are inherent in the experimental data. So two methods, such as, a method for ortho-normalization of experimental modes and the other one for mode expansion, are suggested to gain deformation modes of a flexible body from the experimental modal parameters. Using the virtual work principle, the equation of motion of a flexible body is derived. The effectiveness of the proposed method will be verified in the numerical example of cab vibration of a truck by comparing analysis and test results.

• 대한치과기공학회지
• /
• 제32권1호
• /
• pp.59-63
• /
• 2010

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.383-386
• /
• 1996

In this paper, we propose a design method and control law for plannar type two-link flexible manipulator. In designing flexible links, we use Rayleigh's principle. To control flexible manipulator, input distribution controller is used, which is primarily on the basis of nonlinear variable structure control(VSC). The simulation results are also shown.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.395-405
• /
• 2005

본 논문은 고항복비-고강도강의 효율적인 이용을 위하여 유강혼합구조 시스템의 실험결과를 요약한 것이다. 최근 건축구조물에서도 대형화 및 초고층화 되어감에 따라 사용강재에 대하여 높은 성능을 요구하게 되었고, 고강도강을 사용해야 하는 경우가 늘고 있다. 하지만 고강도강은 항복비가 높고 최대 응력시 변형도가 작고 탄성계수가 연강과 같다는 단점으로 인하여 수요가 증가하고 있지 못한 실정이다. 이러한 고항복비를 가지는 고강도강의 결점을 보완하고 효과적인 사용을 위해서는 새로운 구조시스템이 필요하다. 본 연구에서는 고항복비를 가지는 고강도강을 건축구조물에 효과적으로 적용할 수 있는 방안으로 유강혼합구조 시스템을 제안하고, 고강도강이 포함된 유강혼합기둥 실험을 통하여, 고강도강을 효율적으로 사용할 수 있는 가능성을 제시하고자 하였다. 내력비와 강성비를 포함할 수 있는 강요소 (stiff element)와 유요소 (flexible element)의 항복변형비를 변수로 하여, 유강혼합구조시스템 적용시 적절한 항복변형비를 찾고자 하였다. 실험결과 제안된 유강혼합구조시스템은 연강만으로 이루어진 시스템에 비해 높은 에너지 흡수능력을 보여주었고, 강요소에 대한 유요소의 항복변형비가 2.7~3.3일 때 가장 큰 에너지 흡수능력을 갖는 것을 확인할 수 있었다.