• 조명전기설비학회논문지
• /
• 제14권3호
• /
• pp.49-58
• /
• 2000

본 논문에서는 FACTS(Flexible AC Transnission System)로 분류되는 여라 기기중 기존의 전압제어 및 무효 전력보상기들이 가지고 있는 바속응성과 불연속성 문제를 해결해줄 수 있는 정지형 무효전력 보상가(Static Var Compensator : SVC)를 포함한 전력계통에 신경회로망 제어기를 적용하여 안정화에 관하여 연구하였다. 제안된 신경회로망 제어기는 오차와 오차변화량을 입력하는 오차역전과 학습 알고리즘을 사용하고, 학습시간올 단축하기 위해 모멘텀 방법을 사용하였다. 제안된 방법의 강인섬을 입증하기 위해 중부하시 및 정상부하시에 초기 전력을 변동시킨 경우와 초기에 회천자각을 변동시킨 경우에 대하여 시스렘의 회전자각, 각속도 편차 특성 및 단 자전압의 동특성을 고찰하여 다른 시스템보다 응답특성이 우수합을 보였다.

• 한국정보통신학회논문지
• /
• 제20권1호
• /
• pp.131-141
• /
• 2016

SRM은 저비용, 간단한 자기구조, 넓은 운전속도, 높은 효율, 직류전원과의 우수한 결합성 등의 장점을 가진 전동기구이다. SRM의 토오크는 자속의 방향과는 무관하여 자기구조의 배치가 유연한 특성을 가지고 있어 다양한 자기구조를 가지고 있다. 본 논문에서는 자속방향에 따라 Radial-Flux SRM와 Axial-Flux SRM로 크게 나누었고 기계적인 구조의 차이에 따라 Radial-Flux SRM에는 Conventional, Segmented stator and rotor, Double stator SRM 로, 그리고 Axial-Flux SRM에는 C-core stator와 Axial-airgap SRM로 분류하였고 각각에 대해 비교 해석하여 적절한 용도에 최적의 자기구조를 선택할 수 있도록 각각의 기본적인 특성을 제시하였다.

• 대한토목학회논문집
• /
• 제9권4호
• /
• pp.51-61
• /
• 1989

비선형 거동을 일으키는 구조물의 불규칙 진동해석이나 운동방정식이 매개여기와 비제차 여기를 포함하는 능동장비의 동적해석에는 불규칙 진동분야에서 보편적으로 사용되는 스펙트럼해법의 적용이 불가능하다. 만약 불규칙 입력하중을 인공적으로 시뮬레이션 할 수 있다면 이러한 문제들은 운동방정식에 직접적분법을 적용하여 동적응답을 얻을 수 있다. 본 논문에서는 FFT기법을 이용하여 비정상 불규칙 지반가속도를 시뮬레이션하는 효과적이고 실제적인 방법을 제시하며, 이렇게 얻은 인공지진을 응용하는 문제로서 지진하충을 받는 회전축-베어링계의 동적응답을 시뮬레이션하였다. 또한 시뮬레이션기법의 적용성 및 실용성을 검토하기 위한 민감도에 대한 연구도 제시하였다.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.639-646
• /
• 1995

The objective of this study is to minimize the weight of a damped anisotropic roto-bearing system considering whirl natural frequency and stability. The system is modeled as an assemblage of rigid disks, flexible shafts and discrete bearings. The system design variables are the crosssectional areas of shaft elements and the properties of bearings. To analyze the system, the polynomial method which is derived by rearranging the calculations performed by a transfer matrix method is adopted. For the optimization, the optimization software IDOL (Integrated Design Optimization Library) which is based on the Augmented Lagrange Multiplier (ALM) method is employed. Also, an analytical design sensitivity analysis of the system is used for high accuracy and efficiency. To demonstrate the usefulness of the proposed optimal design program incorporating analysis, design sensitivity analysis, and optimization modules, a damped anisotropic rotor-bearing system is optimized to obtain 34$ weight reduction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.701-706
• /
• 2012

This research is concerned with the derivation of equations of motion for a slewing beam and the application of input shaper to the bang-bang control to achieve vibration suppression. When a uniform beam with a tip mass rotates about the axis perpendicular to the undeformed beam's longitudinal axis, it experiences inertial loading. Hence, the beam vibrates. In this paper, we used the input shaper for the maneuvering control to suppress vibrations. The maneuvering control which can achieve a minimum-time control is a bang-bang control. The input-shaped bang-bang maneuvering is used to suppress vibrations both theoretically and experimentally. The slewing beam experiment is not an easy subject because of the inherent damping existing inside the rotor. We propose the use of a negative damping to eliminate the rotor damping. Numerical and experimental results show that the input-shaper can be effectively used for the vibration suppression of a slewing beam.

• 한국소음진동공학회논문집
• /
• 제22권6호
• /
• pp.542-549
• /
• 2012

This research is concerned with the derivation of equations of motion for a slewing beam and the application of input shaper to the bang-bang control to achieve vibration suppression. When a uniform beam with a tip mass rotates about the axis perpendicular to the undeformed beam's longitudinal axis, it experiences inertial loading. Hence, the beam vibrates. In this paper, we used the input shaper for the maneuvering control to suppress vibrations. The maneuvering control which can achieve a minimum-time control is a bang-bang control. The input-shaped bang-bang maneuvering is used to suppress vibrations both theoretically and experimentally. The slewing beam experiment is not an easy subject because of the inherent damping existing inside the rotor. We propose the use of a negative damping to eliminate the rotor damping. Numerical and experimental results show that the input-shaper can be effectively used for the vibration suppression of a slewing beam.

• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.236-243
• /
• 2010

Fiber Bragg grating(FBG) sensor arrays can be used to monitor the mechanical behavior of the large composite structures such as wind turbine rotor blades and aircrafts. However, brittle FBG sensors, especially multiplexed FBG sensors are easily damaged when they are installed in the flexible structures. As a protection of brittle FBG sensors, epoxy packaged FBG sensors have been presented in this paper. Finite element analysis and experiments were performed to evaluate the effects of adhesives, packaging materials and the bonding layer thickness on the strain transmission. Two types of epoxy were used for packaging FBG sensors and the sensor probes were attached with various bonding layer thickness. It was observed that thin bonding layer with high elastic modulus ratio of the adhesive to packaging provided good strain transmission. However, the strain transmission was significantly decreased when elastic modulus of the adhesive was much lower than the packaged FBG sensor probe's one.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1022-1027
• /
• 2007

This paper presents a method to analyze the unbalance response of a high speed polygon mirror scanner motor supported by sintered metal bearing and flexible structures by using the finite element method and the mode superposition method considering the asymmetry of the gyroscopic effect and sintered metal bearing. The eigenvalues and eigenvectors are calculated by solving the eigenvalue problem and the adjoint eigenvalue problem by using the restarted Arnoldi iteration method. The decoupled equations of motion can be obtained from global finite element motion equations by using the orthogonal relation between the right eigenvectors and left eigenvectors. The decoupled equations of motion are used to analyze the unbalance response of a high speed polygon mirror scanner motor. The validity of the proposed method is verified by comparing the simulated unbalance response with the experimental results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.128-135
• /
• 2006

This paper presents a finite element method to analyze the free vibration of a flexible HDD composed of the spinning disk-spindle system with fluid dynamic bearings(FDBs), the head-suspension-actuator with pivot bearings, and the base plate with complicated geometry. Experimental modal testing shows that the proposed method well predicts tue vibration characteristics of a HDD. This research also shows that even the vibration motion of the spinning disk corresponding to half-speed whirl and the pure disk mode are transferred to a head-suspension-actuator and base plate through the air bearing and the pivot bearing consecutively. The proposed method can be effectively extended to investigate the forced vibration of a HDD and to design a robust HDD against shock.

• 한국소음진동공학회논문집
• /
• 제17권1호
• /
• pp.24-32
• /
• 2007

This paper presents a finite element method to analyze the free vibration of a flexible HDD composed of the spinning disk-spindle system with fluid dynamic bearings(FDBs), the head-suspension-actuator with pivot bearings, and the base plate with complicated geometry. Experimental modal testing shows that the proposed method well predicts the vibration characteristics of a HDD. This research also shows that even the vibration motion of the spinning disk corresponding to half-speed whirl and the pure disk mode are transferred to a head-suspension-actuator and base plate through the air bearing and the pivot bearing consecutively. The proposed method can be effectively extended to investigate the forced vibration of a HDD and to design a robust HDD against shock.