• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.86-88
• /
• 2008

Organosiloxane based spin on planarizing dielectrics (PTS-E and PTS-R) were developed for application in flat panel displays as a replacement to conformal chemical vapor deposited SiNx. Here we demonstrate the successful use of siloxane-based material as a passivation layer for active matrix $\alpha$-Si thin film transistors (TFT) on both rigid and flexible substrates.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.660-663
• /
• 2008

In this study, it was mainly focused on the mechanism and reliability performances of PI/PET composites after many times of curving. We developed a new process of spacer for flexible display to improve the maintenance of cell gap. This new process used the laser carving technology, which is widely applied on printing press, to produce the pattern of spacers and shaped both of the alignment film and spacers simultaneously by press of pattern. Assembling the spacer-shaped film and plastic substrates together well and it shows an excellent performance on the maintenance of cell gap and reliability of curving.

• 한국재료학회지
• /
• 제17권7호
• /
• pp.352-357
• /
• 2007

Since a pattern defects "repair" system using a diode pumped solid state laser for Flat Panel Display (FPD) was suggested, a lot of laser systems have been explored and developed for mass-production microfabrication process. A maskless lithography system using 405 nm violet laser and Digital Micromirror Device (DMD) has been developed for PDP and Liquid Crystal Display (LCD) Thin Film Transistor (TFT) photolithography process. In addition, a "Laser Direct Patterning" system for Indium Tin Oxide (ITO) for Plasma Display Panel(PDP) has been evaluated one of the best successful examples for laser application system which is applied for mass-production lines. The "heat" and "solvent" free laser microfabrications process will be widely used because the next-generation flat panel displays, Flexible Display and Organic Light Emitting Diode (OLED) should use plastic substrates and organic materials which are very difficult to process using traditional fabrication methods.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.529-529
• /
• 2006

Several laboratories worldwide have demonstrated the feasibility of producing amorphous silicon thin film transistor (TFT) arrays at temperatures that are sufficiently low to be compatible with flexible foils such as stainless steel or high temperature polyester. These arrays can be used to fabricate flexible high information content display prototypes using a variety of different display technologies. However, several questions must be addressed before this technology can be used for the economic commercial production of displays. These include process optimization and scale-up to address intrinsic electrical instabilities exhibited by these kinds of transistor device, and the development of appropriate techniques for the handling of flexible substrate materials with large coefficients of thermal expansion. The Flexible Display Center at Arizona State University was established in 2004 as a collaboration among industry, a number of Universities, and US Government research laboratories to focus on these issues. The goal of the FDC is to investigate the manufacturing of flexible TFT technology in order to accelerate the commercialization of flexible displays. This presentation will give a brief outline of the FDC's organization and capabilities, and review the status of efforts to fabricate amorphous silicon TFT arrays on flexible foils using a low temperature process. Together with industrial partners, these arrays are being integrated with cholesteric liquid crystal panels, electrophoretic inks, or organic electroluminescent devices to make flexible display prototypes. In addition to an overview of device stability issues, the presentation will include a discussion of challenges peculiar to the use of flexible substrates. A technique has been developed for temporarily bonding flexible substrates to rigid carrier plates so that they may be processed using conventional flat panel display manufacturing equipment. In addition, custom photolithographic equipment has been developed which permits the dynamic compensation of substrate distortions which accumulate at various process steps.

• 디자인융복합연구
• /
• 제15권2호
• /
• pp.301-317
• /
• 2016

새롭게 등장하는 플렉서블 디스플레이 인터페이스에서는 곡면표현이 가능하고 구부리거나 말거나 접는 등 디스플레이의 변형이 일어나는 특성을 바탕으로 새로운 사용행태를 야기할 수 있다는 점에서, 기존의 딱딱한 평면 디스플레이가 제공하지 못했던 새로운 경험을 줄 수 있을 것으로 논의되고 있다. 그러나 현재 플렉서블 디스플레이 분야에서 사용자경험의 총체적인 속성을 밝히는 연구를 찾기 어려움에 따라, 본 연구에서는 플렉서블 디스플레이 인터페이스에서 사용자가 기대하는 경험이 무엇인지 밝히고자 하였다. 이를 위해, 먼저 기존의 디지털 미디어 인터페이스에서의 사용자경험에 대한 문헌과 플렉서블 디스플레이 인터페이스에서의 사용자경험에 대한 문헌을 조사하고, 현재 사용자의 인식을 반영하기 위한 인터뷰를 진행하여 사용자경험을 나타내는 52개 항목을 수집하였다. 이 항목들은 사용자 기대경험 차원 도출을 위한 측정 문항으로 사용되었으며, 308명을 대상으로 설문조사를 진행하였다. 조사 결과, 플렉서블 디스플레이 인터페이스에서 기대되는 사용자경험은 기능성, 이해성, 유희성, 편의성, 친숙성, 자극성, 적응성, 공동성, 실제성, 심미성의 10가지 차원으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.227-230
• /
• 2005

The concepts of flexible displays and plastic electronics have become some of the most talked about new product opportunities for direct view flat panel displays in recent years. The potential advantages are frequently cited, but the achievement of commercially viable products will require many significant technological innovations in new materials and manufacturing technology. This paper will provide a very broad overview of the rationale for developing flexible displays, the market drivers, the applicable display technologies, the major hurdles that must be overcome and the required evolution of new manufacturing technologies that are essential for successful commercialization. This is intended to provide the outline and context for the series of presentations on specific aspects in each of these topics that will be delivered and discussed at the Plastic Electronics Special Session of the 2005 IMID conference.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.856-859
• /
• 2002

A system for high-resolution analysis of defective elementary cell (R, G or B) on Flat Panel Display (FPD) is described. Based on multiple acquisitions of low-resolution shifted images of the display, our system doesn't require a high-resolution sensor neither tedious alignment of the display, and will remain up to date even facing an important increase of the display dimensions. Our process, highly automated and thus flexible and robust, is expected to perform a full analysis in less than 60s. It is mainly intended for production tests and display classification by manufacturers.

• 한국인쇄학회지
• /
• 제29권2호
• /
• pp.71-82
• /
• 2011

Electronic display markets has been developed. The cathode ray tube of brown form recently celebrated their 100th by first display. Also LCD of flat form recently celebrated their 25th by second display and it has advantage of small volume, lower consumption power. But FPD has problem that is property of brittle and noncarrying by glass substrate. Therefore the arrival of portable electronics devices has put an increasing premium on durable, lightweight and inexpensive display components. It is flexible display by third display. Also electronics field such as printed wiring board, RFID, membrane switch prefer flexible display. The conductive pattern can be used mostly in field of electronic displays and electronics. This manufacture of conductive pattern in present used is screen printing. The the conductive pattern. It has advantages of flexibility, high conductivity, drying in low temperature, good conductivity. screen printing has problem that is low productivity and use not flexible substrate because of high fire temperature. This study was developed novel method to form the conductive pattern. It has advantages of flexibility, high conductivity, drying in low temperature, good conductivity.

• 한국HCI학회논문지
• /
• 제10권2호
• /
• pp.13-19
• /
• 2015

디스플레이 기술은 비약적으로 발전되었다. 특히 플렉서블 디스플레이에 대한 연구를 관련 기업들이 앞다투어 진행하고 있다. 현재 시장에는 플렉서블 디스플레이의 초기 단계인 커브드 디스플레이를 사용한 스마트폰, TV 등이 출시되어 있고, 데스크탑용 커브드 모니터 역시 최근에 출시되어 사무용 또는 엔터테인먼트용으로 이용되고 있다. 본 연구의 목적은 엔터테인먼트용으로 50" 멀티 모니터를 사용시 모니터의 곡률이 사용 자세 제어에 미치는 영향에 관한 것이다. 실험에는 두 종류의 곡률 (평면, 곡률반경 600mm)이 사용되었다. 총 10명의 근골격계질환이 없고, 양안 시력이 모두 0.8이상이고, 색맹 또는 색약이 아닌 평균 (SD) 20.9 (1.5)세의 대학생들이 실험에 참여하였다. 피험자들은 일반적인 VDT 환경의 실험실에서 각 곡률당 30분씩 핸들과 페달을 사용해 운전 게임을 하였다. 각 피험자가 운전 게임을 하는 동안 의자 위에 놓여진 압력 매트를 통해 이들의 COP (Center of Pressure)가 측정되었다. 자세 제어 분석을 위하여, 총 4개의 COP 측정치, Mean Velocity, Median Power Frequency, Root-Mean-Square (RMS) Distance, 그리고 95% Confidence Ellipse Area를 사용하였다. 실험 결과, 곡면대비 평면 디스플레이에서 전후 방향 (Anterior-Posterior; AP)의 RMS distance값이 더 큰 경향을 보였다. 이 결과를 통해 평면 디스플레이를 사용하여 운전 게임을 하는 동안 피험자의 전후 방향으로 몸을 더 많이 움직였다고 할 수 있다. 이는 평면 디스플레이가 곡면 디스플레이보다 화면의 가로방향으로 시거리 차이가 더 크기 때문에, 초점의 이동시간이 더 길어지는 것과 관련이 있을 수 있다. 또한, 평면 디스플레이 대비 곡면 디스플레이에서 더 높은 몰입감을 느끼거나, 더 집중할 수 있는 것과 관련이 있을 수 있다. 디스플레이 곡률에 따른 이런 행동상의 차이가 근골격계 질환에 미치는 영향에 대한 추가 연구가 필요하다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1336-1339
• /
• 2007

Since organic thin film transistor (OTFT) provides simple and low cost processes, its application to the OTFT display has been studied. We developed an RC oscillator using organic thin film transistor and inverters with bootstrapping transistors. Device parameters were optimized by the simulation and OTFT RC oscillators were fabricated. The oscillator frequency and its dependence on resistance and bias voltage were studied. The organic TFT is adequate for low cost and simple process integrated circuits. The frequency of oscillation was simulated and measured. It is acceptable for low-cost microelectronic device and flat panel displays.