• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1089-1094
• /
• 1993

A pilot system for flexible automatic assembly has been built at ASRI in Seoul National University. The system is designed for being capable of assembling different variants and products. The system consists of three industrial robots, four free-flow conveyors, automatic tool changers, RCC and fixtures. This paper describes the concept and the technical solutions of the developed flexible assembly cell. Results of performance evaluation using colored petri net are also presented and discuss.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.78-81
• /
• 2008

We developed tight adhesion techniques of two plastic substrates to maintain cell gap stability for rugged flexible LCDs. By combining rigid spacers and several adhesion materials, we demonstrated mechanically very stable flexible LCDs against pressure and bending.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.232.1-232.1
• /
• 2005

• 센서학회지
• /
• 제26권3호
• /
• pp.173-178
• /
• 2017

In this paper, we newly developed an omnidirectional receiver for visible light communication (VLC). The omnidirectional receiver was composed of a flexible solar cell attached on a cylindrical surface with its axis in vertical direction. The solar cell surface was symmetrical and showed an almost uniform receiving pattern in a horizontal plane. The maximum difference in a receiving pattern was within 7% of its peak value in a horizontal plane. This configuration is very easy to fabricate and useful in constructing wireless sensor networks in which one receiver needs to detect multiple LED signals in different directions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.49-54
• /
• 1992

A flexible robotic assembly cell is modeled using Petri net. A simulator is developed and used to predict the optimal status of the system. The assembly cell of flexible manufacturing system(FMS) pilot plant of Automation and Systems Research Institute(ASRI) in Seoul National University is modeled. The system consists of 3 robots, 4 conveyors, automatic guided vehicle(AGV) and auto-stacker. The simulator is programmed in Turbo C on IBM PC, supporting a simple graphic simulation with pull-down menu. The flexibility of the assembly cell in the FMS plant is guaranteed, since it is possible to predict the optimal status of the system using this simulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.242-248
• /
• 1987

Recently, a quite large number of investigation is published on the subject of Flexible Manufacturing System which can cope with the volatile market demand and the variety of product. Minimum requirement of designing FMS is depicted and by investigating the communication system between the machine tool and the cell control computer, ana between the central computer and the cell control computer, when it is formed as a sub-system of an FEM, the software can be evolved to the control software of the total Flexible Manufacturing System. It is developed the communication system between the central computer and the cell control computer which is the basic structure of the control architecture of FMS under the concept of DNC (Direct Numerical Control). It is used CYBER 180-830 as the central computer, and GMC-1100 computer as the cell control computer, and the main basic program is developed and tested, thus forming a DNC system which can be used in educational environment.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권1호
• /
• pp.41-47
• /
• 2016

Purpose: The purpose of this study was to evaluate electrical and structural degradation of flexible CIGS sollar cell exposed to high temperature and humid atmosphere. Method: Accelerated degradation was performed for various time under $85^{\circ}C/85%RH$ and then electrical and structural properties were analyzed by 4-point probe method, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). Results: Sheet resistance of the top ITO layer increased with exposure time to the high temperature and humid atmosphere. Blunting of the protrusion morphology of ITO layer was observed for the degraded specimen, while no phase change was detected by XRD. Oxygen was detected at the edge area after 300 hours of exposure. Conclusion: Increase in electrical resistance of the degraded CIGS solar cell under high temperature and humid environment was attribute to the oxygen or water absorption.

• Journal of Electrochemical Science and Technology
• /
• 제14권2호
• /
• pp.120-130
• /
• 2023

PEMFC has high potential for future development due to its high energy density, eco-friendliness, and high energy efficiency. When it becomes small, light and flexible, it can be competitive as an energy source for portable devices or flexible electronic devices. However, the use of hard and heavy materials for structural rigidity and uniform contact pressure transmission has become an obstacle to reducing the weight and flexibility of PEMFCs. This review intends to provide an example of the application of a new structure and material for lightweight and flexibility. As a lightweight PEMFC, a tubular design is presented and structural advantages through numerical modeling are explained. Manufacturing methods to realize the structural advantages and possibilities of tubular PEMFCs are discussed. In addition, the materials and manufacturing processes used to fabricate lightweight and flexible PEMFCs are described and factors affecting performance are analyzed. Strategies and structural improvements of light and flexible movements are discussed according to the component parts.

• 한국염색가공학회지
• /
• 제20권1호
• /
• pp.44-47
• /
• 2008

Organic semi-conductive materials have characteristics such as the advantages of easy formability, low-cost and diversity along with moderate semi-conductive properties. In this paper, we developed a flexible organic-inorganic hybrid solar cell fiber. First, we made a solar cell on the glass and attached the solar cell on the glass fiber similarly. In the latter case, thermal deposition method was employed in order to effectively apply ITO onto fiber surface. The amount of ITO was controlled by varying the temperature from 25, 150 to $300^{\circ}C$. Optimum result was obtained at $150^{\circ}C$ where maximize the deposition amount without significant decomposition of ITO. Despite of maximum open circuit voltage of 0.39V, the resulting current was quite unstable and weak, limiting realistic applications. It was, however, concluded that the flexible solar cell fiber developed showed a possibility of low-weight application from functional clothing for military to space suit mainly due to flexibility and thus wear ability.

• 소성∙가공
• /
• 제21권8호
• /
• pp.499-505
• /
• 2012

The fuel cell is a very promising power generation system combining the benefits of extremely low emissions, high efficiency, ease of maintenance and durability. In order to promote the commercialization of fuel cells, a flexible forming process, in which a hyper-elastic rubber is adopted as a medium to transmit forming pressure, is suggested as an efficient and cost effective manufacturing method for fuel cell bipolar plates. In this study, the ability of this flexible forming process to produce the micro channel arrays on metallic bipolar plates was first demonstrated experimentally. Then, a finite element (FE) model was built and validated through comparisons between simulated and experimental results. The effects of key process parameters on the forming performance such as applied load and punch velocity were investigated. As a result, appropriate process parameter values allowing high dimensional accuracy without failure were suggested.