• Earthquakes and Structures
• /
• v.5 no.1
• /
• pp.23-48
• /
• 2013

In this study, the effect of flexibility of superstructures and nonlinear characteristics of LRB (Lead Rubber Bearing) isolator on inelastic response of base isolated structures is investigated. To demonstrate the intensity of damage in superstructures, demand response modification factor without the consideration of damping reduction factor, demand RI, is used and the N2 method is applied to compute this factor. To evaluate the influence of superstructure flexibility on inelastic response of base isolated structures, different steel intermediate moment resisting frames with different heights have been investigated. In lead rubber bearing, the rubber provides flexibility and the lead is the source of damping; variations of aforementioned characteristics are also investigated on inelastic response of superstructures. It is observed that an increase in height of superstructure leads to higher value of demand RI till 4-story frame but afterward this factor remains constant; in other words, an increase in height until 4-story frame causes more damage in the superstructure but after that superstructure's damage is equal to the 4-story frame's. The results demonstrate that the low value of second stiffness (rubber stiffness in LRBs) tends to show a significant decrease in demand RI. Increase in value of characteristic strength (yield strength of the lead in LRBs) leads to decrease in the demand RI.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.943-946
• /
• 2007

Recently, lots of research are going on relation to Improving the Flexibility through all of construction I industry in that space, materials, structure, construction method, etc. The style , space and pattern of housing have been changing by reason that satisfying change of residential environment at the needs of the times, transformation of future-oriented construction trend and recognition of demand-oriented. Therefore, this study should suggest alternations through comparing and analyzing to construction factor of improving the Flexibility, and then should show direction and guideline for realizing actual a long life housing at the next generation through applicable and various classification examples in apartment housing.

• Journal of the military operations research society of Korea
• /
• v.7 no.1
• /
• pp.53-80
• /
• 1981

This paper explores a rational investment decision model in sequential capital allocation process under capital rationing. A method is proposed for measuring the new investment decision factor which is the flexibility that describes the future availability of invested funds. This flexibility is important in sequential decision process. Also presented is a multiobjective (MO) decision model into which flexibility is incorporated with the profit and risk factors. The effectiveness of this criterion is compared with the expected present value and the mean-semivariance criteria through a simulation model.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1439-1450
• /
• 1995

Bellows is a familiar component in piping systems as it provides a relatively simple means of absorbing thermal expansion and providing system flexibility. In routine piping flexibility analysis by finite element methods, bellows is usually considered to be straight pipe runs modified by an appropriate flexibility factor; maximum stresses are evaluated using a corresponding stress concentration factor. The aim of this study is to develop a bellows finite element, which similarly includes more complex shell type deformation patterns. This element also does not require flexibility or stress factors, but evaluates more detailed deformation and stress patterns. The proposed bellows element is a 3-D, 2-noded line element, with three degrees of freedom per node and no bending. It is formulated by including additional 'internal' degrees of freedom to account for the deformation of the bellows corrugation; specifically a quarter toroidal section of the bellows, loaded by axial force, is considered and the shell type deformation of this is include by way of an approximating trigonometric series. The stiffness of each half bellows section may be found by minimising the potential energy of the section for a chosen deformation shape function. An experiment on the flexibility is performed to verify the reliability for bellows finite element.

• Journal of Distribution Research
• /
• v.1 no.1
• /
• pp.239-258
• /
• 1996

This study deals with the measurement of relational norms, a safeguard for sustained exchange relationshipsim marketing channel systems. Here, the relational norm items are hypothesized to have a second-order factor model, in which mine observed items originate from the three first-order factors and the first order factors in turn originate from a second-order factor. The three first order construe comprising a higher order norm are mutuality(equity in the distribution of benefits and burdens over the course of the exchange on a long term basis), flexibility(expectation of friendly adaption for possible circumstance changes), and solidarity (the degree to which the preservation of the unique and continuing relationship is internalized by the exchange partners as being important in and of itself). 113 research questionnaires are obtained from four industries such as construction, telecommunication, iron, and electric ＆ electronic industries, Reliability and nomological. discriminant validity are tested, and in using the confirmatory factor analysis of Lisrel 7.16, and the chi-square difference test it is tested which has a better satisfactory fit to the data, the first-order model or the second-order one. The results of this study indicates that relational norms have a second order construct. In the electric and electronic industry the model as a while has a satisfactory fit to the data and the relevant first- and second-order factor loading to the mutuality is not significant. Same Results are happened to the flexibility in the telecommunication industry and to the mutuality and flexibility in the inn industry. In sum, the model lends support to our construct, but it is difficult to apply the measurement model to all kinds of industries.

• Structural Engineering and Mechanics
• /
• v.71 no.4
• /
• pp.391-405
• /
• 2019

Compared to the ambient vibration test mainly identifying the structural modal parameters, such as frequency, damping and mode shapes, the impact testing, which benefits from measuring both impacting forces and structural responses, has the merit to identify not only the structural modal parameters but also more detailed structural parameters, in particular flexibility. However, in traditional impact tests, an impacting hammer or artificial excitation device is employed, which restricts the efficiency of tests on various bridge structures. To resolve this problem, we propose a new method whereby a moving vehicle is taken as a continuous exciter and develop a corresponding flexibility identification theory, in which the continuous wheel forces induced by the moving vehicle is considered as structural input and the acceleration response of the bridge as the output, thus a structural flexibility matrix can be identified and then structural deflections of the bridge under arbitrary static loads can be predicted. The proposed method is more convenient, time-saving and cost-effective compared with traditional impact tests. However, because the proposed test produces a spatially continuous force while classical impact forces are spatially discrete, a new flexibility identification theory is required, and a novel structural identification method involving with equivalent load distribution, the enhanced Frequency Response Function (eFRFs) construction and modal scaling factor identification is proposed to make use of the continuous excitation force to identify the basic modal parameters as well as the structural flexibility. Laboratory and numerical examples are given, which validate the effectiveness of the proposed method. Furthermore, parametric analysis including road roughness, vehicle speed, vehicle weight, vehicle's stiffness and damping are conducted and the results obtained demonstrate that the developed method has strong robustness except that the relative error increases with the increase of measurement noise.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.73-78
• /
• 2001

In this paper, overall planning and design procedure for the marine transportation are examined. For this purpose, marine transportation analysis for the North Nemba deck structure has been carried out. The results of analysis with the rigid barge transportation are compared to those with the barge considering its flexibility. The environmental conditions, especially waves, are shown to be the most important factor which affected on the structural strength, deformation and fatigue damage.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.77-82
• /
• 2005

Bellows is a familiar component in piping systems as it provides a relatively simple means of absorbing thermal expansion and providing system flexibility. In routine piping flexibility analysis by finite element methods, bellows is usually considered to be straight pipe runs modified by an appropriate flexibility factor; maximum stresses are evaluated using a corresponding stress concentration factor. In this paper, the dynamic characteristics of bellows were investigated by Finite element methods. Using Anany program, the natural frequencies and evaluation of the reliability of bellows were also investigated.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.28
• /
• pp.157-163
• /
• 1993

The problem of manufacturing flexibility(MF) is assuming increasing importance in business environment This paper examines definition and classification of MF based on the literature. Using empirical data and employing factor analysis, MF was measured.

• Structural Engineering and Mechanics
• /
• v.65 no.1
• /
• pp.99-110
• /
• 2018

The focus of this paper is on the elements with stable open cracks. To analyze plane problems, two triangular elements with three and six nodes are formulated using force method. Flexibility matrices of the elements are derived by combining the non-cracked flexibility and the additional one due to crack, which is computed by utilizing the local flexibility method. In order to compute the flexibility matrix of the intact element, a basic coordinate system without rigid body motions is required. In this paper, the basic system origin is located at the crack center and one of its axis coincides with the crack surfaces. This selection makes it possible to formulate elements with inclined cracks. It is obvious that the ability of the suggested elements in calculating accurate natural frequencies for cracked structures, make them applicable for vibration-based crack detection.