• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.177-182
• /
• 2014

To stop a high speed train running at the speed of 300 km/h, the disc brake for the train should be able to dissipate enormous kinetic energy of the train into frictional heat energy. Sintered pin-type metals are mostly used for friction materials of high speed brake pads. A pad comprises several friction pins, and the topology, length, flexibility, composition, etc. have a great influence on the tribological properties of the disc brake. In this study, the topology of the friction pins in a pad was our main concern. We presented the optimization of the topology of a railcar brake pad with nine-pin-type friction materials by thermo-mechanical contact analysis. We modeled the brake pad with/without a back plate. To simulate a continuous braking, the pad or friction materials were rotated at constant velocity on the friction surface of the disc. We varied the positions of the nine friction materials to compare the temperature distributions on the disc surface. In a non-optimized brake pad, the distance between two neighboring friction materials in the radial direction from the rotational center of the disc was not equal. In an optimized pad, the distance between two neighboring friction materials in the radial direction was equal. The temperature distribution on the disc surface fluctuated more for the former than the latter. Optimizing the pad reduced the maximum temperature of the brake disc by more than 10%.

• Structural Monitoring and Maintenance
• /
• v.5 no.2
• /
• pp.297-311
• /
• 2018

Plate and shell structure is widely applied in engineering, i.e. building roofs, aircraft wings, ship platforms, and satellite solar arrays. Its vibration problem has become increasingly prominent due to the tendency of lightening, upsizing and flexibility. As a new smart material with great actuating force and toughness, macro-fiber composite (MFC) is composed of piezoelectric fiber and epoxy resin basal body, which can be directly pasted onto the surface of plate and shell and is suitable for vibration control. This paper deduces the actuation equation of MFC coupled plate in different boundary conditions, an equivalent finite element modeling method is proposed which uses MFC actuating force as the applied excitation, and on this basis the active control simulation and experiment of MFC over plate and shell structure vibration are accomplished. The results indicate that MFC is able to implement effective control over plate and shell structure vibration in multi-band range. The comparison between experiment and simulation proves that the actuation equation deduced herein, effective and practicable, can be applied into the simulation calculation of MFC vibration control over plate and shell structure.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.75-80
• /
• 2009

Despite its flexibility to complex geometry, three-dimensional (3D) electromagnetic(EM) modeling schemes using finite element method (FEM) have been faced to practical limitation due to the resulting large system of equations to be solved. An efficient 3D FEM modeling scheme has been developed, which can adopt either direct or iterative solver depending on the problems. The direct solver PARDISO can reduce the computing time remarkably by incorporating parallel computing on multi-core processor systems, which is appropriate for single frequency multi-source configurations. When limited memory, the iterative solver BiCGSTAB(1) can provide fast and stable convergence. Efficient 3D simulations can be performed by choosing an optimum solver depending on the computing environment and the problems to be solved. This modeling includes various types of controlled-sources and can be exploited as an efficient engine for 3D inversion.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.2
• /
• pp.65-73
• /
• 2014

An overall responding security-centered framework is necessary required for infringement accidents, failures, and cyber threats. On the other hand, the correspondence structures of existing administrative, technical, physical security have weakness in a system responding to complex attacks because each step is performed independently. This study will recognize all internal and external users as a potentially threatening element. To perform connectivity analysis regarding an action, an intelligent convergence security framework and road map is suggested. A suggested convergence security framework was constructed to be independent of an automatic framework, such as the conventional single solution for the priority defense system of APT of the latest attack type, which makes continuous reputational attacks to achieve its goals. This study suggested the next generation convergence security framework to have preemptive responses, possibly against an APT attack, consisting of the following five hierarchical layers: domain security, domain connection, action visibility, action control, and convergence correspondence. In the domain, the connection layer suggests a security instruction and direction in the domains of administrative, physical and technical security. The domain security layer has consistency of status information among the security domain. A visibility layer of an intelligent attack action consists of data gathering, comparison and decision cycle. The action control layer is a layer that controls the visibility action. Finally, the convergence corresponding layer suggests a corresponding system of before and after an APT attack. The administrative security domain had a security design based on organization, rule, process, and paper information. The physical security domain is designed to separate into a control layer and facility according to the threats of the control impossible and control possible. Each domain action executes visible and control steps, and is designed to have flexibility regarding security environmental changes. In this study, the framework to address an APT attack and load map will be used as an infrastructure corresponding to the next generation security.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.8
• /
• pp.759-765
• /
• 2016

The PTO (Power Take-Off) shaft for aircraft, with welded construction using multiple thin membranes, was developed in the 1950s to improve the elasticity of the part. As it is lightweight, stable at high speeds, and has good flexibility, it is used in most of the fighter aircraft. It connects the AMAD (aircraft mounted accessory drive) gearbox with the EMAD (engine mounted accessory drive) gearbox and transmits the rotational power between them. It operates in the high speed range of 10,000-18,000 rpm. In this study, the safety of the PTO shaft made of Ti alloy was investigated using finite element analysis, and the ability to transmit power was demonstrated through a high-cycle fatigue test conducted in a laboratory. Further, the life of the ball joints of the aircraft under high-cycle fatigue test conditions was predicted, and the wear characteristics were analyzed.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.767-804
• /
• 2000

International network strategy is intended to examine the validity of existing network-centered theories in order to ascertain why small-and medium-sized enterprises are useful as a strategic correspondence to the internationalization trend. Small-and medium-sized enterprises can be estimated as being vital majorities in terms of their flexibility to meet changable conditions in international marketing compared with the conglomerates Therefore, their dependency on a few conglomerates for the international economy can be diverged. Generally, the successful internationalization of industries can be derived from the creation of suitable strategies for its competence and quality with the effective correction and completion of its strategy and tactics through mistakes. The internationalization strategy of small-and medium-sized enterprises should not be the reckless pursuit of internationalization that depends only on the increase of investment or the simple induction of the other conglomerates strategic models, but it should be accomplished through the evolution and practice of the concrete strategies that will be more proper for the enterprise's property and efficiency. The results of analyses with proof can be summarized with two effects in large in the process of internationalization of domestic small-and medium-sized enterprises. First, the capacity for internationalization of firms results from a long-term training procedure and continuous development of managing activities. Then in time this becomes an important element for the small-and medium-sized firms in terms with its position targeted international trading. However, the domestic enterprises are showing their abilities in the international competition in quantity, and trying to establish relationships between the enterprises through international networks. Second, statistics might not be meaningful in part because of the lack of data for analysis. It seems that more useful results will be derived from obtaining and utilizing sufficient information and from establishing an inter-relationship between the small-and medium-sized enterprises which are investing in foreign companies.

• Archives of design research
• /
• v.9
• /
• pp.801-810
• /
• 1994

Design Problems are often both multidimensional and highly interactive. Very rarely does any part of a designed thing serve only one purpose. The activity of designing is thus a goal-directed activity and normally a goal-directed problem-solving activity. This means, problem solving is finding a way to get from some initial situation to a desired goal. Designers are transforming agents within a society whose goals are to improve the human condition through physical metamorphosis. Many theorist have agreed that designing involves problem solving or decision making. Accordingly evaluation plays an essential role in design activity. The evaluation factors include all attributes that have levels specified by quantitative and qualitative objectives Alternatives in multi-objective decision prOblems generally possess numerous attributes by which they can be described and compared. The evaluation factors include all attributes that have levels specified by quantitative and qualitative objectives. However since qualitative factors are difficult to quantify as numeral estimates, these factors have tended to be ignored without regard for their importance to human content. We adapted the Accumulative Evaluation Model as an evaluation algorithm for IDES. Industrial Design Evaluation System (IDES) consists of 3 major modules ( 1 Design Element, 2.Matrix, 3.Evaluation). It is intended to be an aid for design evaluation. The luther thinks IDES is a new design evaluation approach which could provide effective rating of design values to make value judgements. It is an attempt to provide industrial designers with access to design evaluation. The author's aim is to produce an Object-Oriented Evaluation System which can guide the designers and decision makers under complex design projects. It uses\ulcorner an Object-Oriented Programming for this prototype, Because of managing complexity (Flexibility and Reusability) and improving productivity(Extensibility & Maintainability and Programming by User) in software development process. The author has chose the C++ because it is a hybrid, rather than pure Object-Oriented Language.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.123-128
• /
• 2018

Girder bridges and slab bridges are equipped with a system consisting of a flexible joint unit, support, inverted T shaped abutment, and a separate connecting slab structure. These systems have problems such as an increase in cost due to frequent breakage of the expansion joints and a decrease in durability due to a structure with low moment redistribution. To improve these problems, propose Inegral and Semi-Integral Hybrid Slab Bridge and examine the safety through structural analysis. As a result of the review, Inegral and Semi-Integral Hybrid Slab Bridge was the section stiffness is small. but it is confirmed that the structural safety, ductility and flexibility are higher than existing bridges because the moment redistribution and the force transmission are surely performed.

• Earthquakes and Structures
• /
• v.9 no.3
• /
• pp.603-623
• /
• 2015

The scale and nature of the recent earthquakes in the world and the related earthquake disaster index coerce the concerned community to become anxious about it. Therefore, it is crucial that seismic lateral load effect will be appropriately considered in structural design. Application of seismic isolation system stands as a consistent alternative against this hazard. The objective of the study is to evaluate the structural and economic feasibility of reinforced concrete (RC) buildings with base isolation located in medium risk seismic region. Linear and nonlinear dynamic analyses as well as linear static analysis under site-specific bi-directional seismic excitation have been carried out for both fixed based (FB) and base isolated (BI) buildings in the present study. The superstructure and base of buildings are modeled in a 3D finite element model by consistent mass approach having six degrees of freedom at each node. The floor slabs are simulated as rigid diaphragms. Lead rubber bearing (LRB) and High damping rubber bearing (HDRB) are used as isolation device. Change of structural behaviors and savings in construction costing are evaluated. The study shows that for low to medium rise buildings, isolators can reduce muscular amount of base shears, base moments and floor accelerations for building at soft to medium stiff soil. Allowable higher horizontal displacement induces structural flexibility. Though incorporating isolator increases the outlay, overall structural cost may be reduced. The application of base isolation system confirms a potential to be used as a viable solution in economic building design.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.365-374
• /
• 2006

A 'Readymade' is an everyday object selected and designated as art. The term was coined by Marcel Duchamp to describe his artistic process based on the attempt to destroy the notion of the uniqueness of the art object: his influence went for beyond the art world affecting all design activities based on creativity. The purpose of this study is to investigate the ready-made technique from an educational point of view. Starting from Duchamp experience and his further influence on the design world, the study aims to demonstrate the value of the ready-made technique as a basic element in the education of young designers. The research method is based on the empirical observation of the results of the same project assigned to forty different students in different universities. The collected results were grouped in four families according to each specific generative method: constructive, conceptual, aggregative and elaborative. These four categories, derived by the observation of the results, represent tangible variations of the same disciplined technique. This flexibility demonstrates the value of the ready-made process as a foundation practice particularly indicated for young designers. These are the main skills students developed through its application to design projects; exploring and reconsidering attitude, recycling issues, new identity to familiar objects, focus on ideas.