• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.225-233
• /
• 2018

This paper proposes a universal system control strategy for voltage source converter (VSC) based high voltage direct current (HVDC) systems. The framework of the designed control strategy consists of five layer structures considering the topology and control characteristics of the VSC-HVDC system. The control commands sent from the topmost layer can be transmitted to the next layer based on the existing communication system. When the commands are sent to each substation, the following transmission of commands between the four lower layers are realized using the internal communication system while ignoring the communication delay. This hierarchical control strategy can be easily applied to any VSC-HVDC system with any topology. Furthermore, an integrated controller for each converter is designed and implemented considering all of the possible operating states. The modular-designed integrated controller makes it quite easy to extend its operating states if necessary, and it is available for any kind of VSC. A detailed model of a VSC-HVDC system containing a DC hub is built in the PSCAD/EMTDC environment. Simulation results based on three operating conditions (the start-up process, the voltage margin control method and the master-slave control method) demonstrate the flexibility and validity of the proposed control strategy.

• Strategy21
• /
• s.40
• /
• pp.82-114
• /
• 2016

The purpose of this article is to analyze the progress of North Korea's SLBM threat, and to assess the technological capacity and threat level of its SLBMs. Currently, North Korea has approximately 1000 ballistic missiles, such as the SCUD, Musudan, and Nodong, in stock. This article pays close attention to the background and strategical implication behind North Korea's obsession with developing SLBMs despite possessing sufficient means to launch provocations with its current arsenal of ground based ballistic missiles and conventional weapons. Based on the abovementioned analysis, this article will recommend possible response directions for the ROK Armed Forces to North Korea's SLBM threat. It is highly difficult to detect SLBMs due to its stealthy nature, as it is launched underwater after covert infiltration. North Korea's SLBM is considered a game changer in that even one SLBM can significantly change the strategic balance of North East Asia. North Korea's SLBM test launch in August has made a 500km flight, landing 80km inside the JADIZ (Japan Air Defense Identification Zone), and as such, it is assessed that North Korea already possesses underwater ejection and cold launch capabilities. The most realistic response to North Korea's imminent SLBM threat is bolstering anti-submarine capabilities. ROK Armed Forces need to upgrade its underwater kill-chain by modernizing and introducing new airborne anti-submarine assets and nuclear-powered submarines, among many options. Moreover, we should integrate SM-3 missiles with the Aegis Combat system that possess strong detection capabilities and flexibility, thereby establishing a sea-based Ballistic Missle Defense (BMD) system centered around the Aegis Combat System, as sea-based ballistic missile threats are best countered out in the seas. Finally, the capabilities gap that could arise as a result of budgetary concerns and timing of fielding new assets should be filled by establishing firm ROK-US-Japan combined defense posture.

• Journal of Navigation and Port Research
• /
• v.31 no.7
• /
• pp.605-611
• /
• 2007

In order to become a mega hub port, major ports all over the world are making every effort to enhance their productivity through efficiency of internal operation. Accordingly, in order to enhance the competitiveness of a container terminal, an automated container terminal is considered as the best alternative. An automated container terminal is using such automated handling equipment as AGV(Automated Guided Vehicles) and ATC(Automated Transfer Crane). The efficient equipment operation plays a critical role in enhancing the productivity of an automated container terminal. In an automated container terminal, the most important equipments are AGV and ATC. Each block of containers with a vertical layout is generally operating two ATCs. The two ATCs can be crossed or not at each block. In the case of operating crossover ATC, it has an advantage of high flexibility that ATC work is possible at both TP(Transfer Point) of each block. But it has also a disadvantage that the yard has to be operated at a low storage level of containers in the terminal yard. Recently, for automated container terminals, which are being prepared for opening in Korea, they plan to use uncrossed twin ATC in order to make the storage level of their yards high at a low cost. Therefore, studies have to be made in order to increase the efficiency of twin ATC system based on the flexibility that the crossover ATC system has. This research aims to suggest an operation strategy to improve efficiency of twin ATC at each storage block in a yard.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.561-578
• /
• 2010

This study proposes a multi-level damage localization strategy to achieve an effective damage detection system for civil infrastructure systems based on wireless sensors. The proposed system is designed for use of distributed computation in a wireless sensor network (WSN). Modal identification is achieved using the frequency-domain decomposition (FDD) method and the peak-picking technique. The ASH (angle-between-string-and-horizon) and AS (axial strain) flexibility-based methods are employed for identifying and localizing damage. Fundamentally, the multi-level damage localization strategy does not activate all of the sensor nodes in the network at once. Instead, relatively few sensors are used to perform coarse-grained damage localization; if damage is detected, only those sensors in the potentially damaged regions are incrementally added to the network to perform finer-grained damage localization. In this way, many nodes are able to remain asleep for part or all of the multi-level interrogations, and thus the total energy cost is reduced considerably. In addition, a novel distributed computing strategy is also proposed to reduce the energy consumed in a sensor node, which distributes modal identification and damage detection tasks across a WSN and only allows small amount of useful intermediate results to be transmitted wirelessly. Computations are first performed on each leaf node independently, and the aggregated information is transmitted to one cluster head in each cluster. A second stage of computations are performed on each cluster head, and the identified operational deflection shapes and natural frequencies are transmitted to the base station of the WSN. The damage indicators are extracted at the base station. The proposed strategy yields a WSN-based SHM system which can effectively and automatically identify and localize damage, and is efficient in energy usage. The proposed strategy is validated using two illustrative numerical simulations and experimental validation is performed using a cantilevered beam.

• Journal of Korean Society on Water Environment
• /
• v.32 no.3
• /
• pp.318-324
• /
• 2016

The significance of an integrated environmental management system implementation can be summarized into three sections. The first is that the paradigm of a permit system will be changed from the existing media-specific permits to cross-media permits. In the near future, the cross-media license will be granted based on the diagnostic results of the plant. The second is that it will be established through a social concensus, i.e., consultations with stakeholders and direct participation in the system design process of stakeholders. The third is that it will have flexibility in its operating system. In the near future, it will be possible to management an environment through its industrial workplace itself and determine if emission standards are being complied with or not through statistical methods. In addition there is also an urgent need for complementary parts in order to enhance the driving force of the integrated environmental management system which is based on transparency, reliability and flexibility. In other words, it is necessary to continuously promote in order to diffuse consensus and increase an understanding of implementation through an integrated environmental management system. It is also necessary to establish a new organization and educate authorized representatives so that they have the tools to smoothly perform the system.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.24-32
• /
• 2012

Direct duty-ratio PWM schemes for continuous fault tolerant operation of matrix converter-fed motor drives are presented. The proposed method features simple modular modulation structure based on per output phase concept, which requires no additional modification on the normal modulation schemes for fault-tolerant applications. Realizations of fault-tolerant strategy applied to different system configurations are also treated to enhance the system flexibility. The proposed method can be effectively applied to treat the motor open phase fault and converter switching device failure. Simulation and experimental results show the feasibility and validation of the proposed strategies.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.408-410
• /
• 2005

Multilevel converters have emerged like a new strategy for energy conversion from medium power to high power. The main characteristic of the topologies classified as multilevel, is the use of commutation devices connected in series, allowing the distribution of the voltage and reducing stress in the commutation switches. Stacked Multicell Converter (SMC), is classified as single-phase voltage source inverter(VSI). Due to the fact, the SMC generates a signal of alternating current of several levels of voltage of direct current. The following work will demonstrate the flexibility of the above mentioned topology using a low cost control circuit architecture.

• International Journal of Advanced Culture Technology
• /
• v.11 no.2
• /
• pp.186-190
• /
• 2023

There are unimaginable possibilities ahead of us. As a result, it is difficult to predict the future, but the prediction itself is not meaningless. This is because it can have the flexibility to cope with contingencies by predicting various possibilities. This study was conducted to explore extreme events (X-event) in the Korean population sector. To this end, in-depth interviews were conducted with experts from the Korea Army Research Center for Future & Innovation and the Army College, and based on this, significant research results were derived that population problems such as population decline and aging can affect various fields such as economy. With this study, we hope that discussions on extreme events (X-event) that can occur in our society will be further activated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.638-642
• /
• 1994

The objectives of this work are to present the dynamic simulation strategy based on cluster-modular approach and to develop a prototype simulator. In addition, methods for the improvement of computational efficiency and applicability are studied. A process can be decomposed into several clusters which consist of strongly coupled units depending upon the process dynamics or topology. The combined approach of simultaneous and sequential simulation based on the cluster structure is implemented within the developed dynamic process simulator, MOSA(Multi Objective Simulation Architecture). Dynamic simulation for a utility plant is presented as a case study in order to prove the efficiency and flexibility of MOSA.

• Journal of Information Technology Applications and Management
• /
• v.14 no.2
• /
• pp.117-127
• /
• 2007

Using an exchange standard, we can design an open architecture for the interchange of decision models and data. XML (eXtensible Markup Language) provides a general framework for creating such a standard. Although XML -based model representation languages such as OOSML were proposed, they are partly limited in expression capability, flexibility, generality, etc. This paper proposes a new method for expressing and sharing decision models and data based on XBRL (eXtensible Business Reporting Language), which is a XML language specialized in business reporting. We have developed a XBRL taxonomy for decision models with the concepts and relationships of a representative modeling framework, SM (Structured Modeling). The method allows for expressing data as well as decision models in a consistent and flexible manner. Diverse dependencies between components of SM models can also be affluently expressed.