• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.147-155
• /
• 2017

A new endurance test-pattern generation on NAND-flash memory is proposed to improve test cost. We mainly focus on the correlation between the data-pattern and the device error-rate during endurance testing. The novelty is the development of testing method using quasi-random pattern based on device architectures in order to increase the test efficiency during time-consuming endurance testing. It has been proven by the experiments using the commercial 32 nm NAND flash-memory. Using the proposed method, the error-rate increases up to 18.6% compared to that of the conventional method which uses pseudo-random pattern. Endurance testing time using the proposed quasi-random pattern is faster than that of using the conventional pseudo-random pattern since it is possible to reach the target error rate quickly using the proposed one. Accordingly, the proposed method provides more low-cost testing solutions compared to the previous pseudo-random testing patterns.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2021

The widely used low-cost design methodology for IoT devices is very popular. In such a networked device, memory is composed of flash memory, SRAM, DRAM, etc., and because it processes a large amount of data, memory design is an important factor for system performance. Therefore, each device selects optimized design factors such as function, performance and cost according to market demand. The design of a memory architecture available for low-cost IoT devices is very limited with the configuration of SRAM, flash memory, and DRAM. In order to process as much data as possible in the same space, an architecture that supports parallel processing units is usually provided. Such parallel architecture is a design method that provides high performance at low cost. However, it needs precise software techniques for instruction and data mapping on the parallel architecture. This paper proposes an instruction/data mapping method to support optimized parallel processing performance. The proposed method optimizes system performance by actively using hardware and software parallelism.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.360-369
• /
• 2012

The causes of showing different subthreshold slopes (SS) in programmed and erased states for two different charge trap flash (CTF) memory devices, SONOS type flash memory with gate-all-around (GAA) structure and TANOS type NAND flash memory with planar structure were investigated. To analyze the difference in SSs, TCAD simulation and low-frequency noise (LFN) measurement were fulfilled. The device simulation was performed to compare SSs considering the gate electric field effect to the channel and to check the localized trapped charge distribution effect in nitride layer while the comparison of noise power spectrum was carried out to inspect the generation of interface traps ($N_{IT}$). When each cell in the measured two memory devices is erased, the normalized LFN power is increased by one order of magnitude, which is attributed to the generation of $N_{IT}$ originated by the movement of hydrogen species ($h^*$) from the interface. As a result, the SS is degraded for the GAA SONOS memory device when erased where the $N_{IT}$ generation is a prominent factor. However, the TANOS memory cell is relatively immune to the SS degradation effect induced by the generated $N_{IT}$.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.767-774
• /
• 2010

Due to advantages of NAND flash memory such as non-volatility, low access latency, low energy consumption, light weight, small size and shock resistance, it has become a better alternative over traditional magnetic disk drives, and has been widely used. Traditional DBMSs including mobile DBMSs may run on flash memory without any modification by using Flash Translation Layer (FTL), which emulates a random access block device to hide the characteristics of flash memory such as "erase-before-update". However, most existing FTLs are optimized for file systems, not for DBMSs, and traditional DBMSs are not aware of them. Also, traditional DBMSs do not consider the characteristics of flash memory. In this paper, we propose a flash-conscious storage system for DBMSs that utilizes flash memory as a main storage medium, and carefully put the characteristics of flash memory into considerations. The proposed flash-conscious storage system exploits log records to avoid costly update operations. It is shown that the proposed storage system outperforms the state.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.117-123
• /
• 2011

The low electric power and high efficiency chips are required because of the appearance of smart phones. Also, high-capacity memory chips are needed. e-MMC(embedded Multi-Media Card) for this is defined by JEDEC(Joint Electron Device Engineering Council). The e-MMC memory for research and development is a memory mulit-chip module of 64GB using 16-multilayers of 4GB NAND-flash memory. And it has simplified the chip by using SIP technique. But mulit-chip module generates high heat by higher integration. According to the result of study, whenever semiconductor chip is about 10 $^{\circ}C$ higher than the design temperature it makes the life of the chip shorten more than 50%. Therefore, it is required that we solve the problem of heating value and make the efficiency of e-MMC improved. In this study, geometry of 16-multilayered structure is compared the temperature distribution of four different geometries along the numerical analysis. As a result, it is con finned that a multilayer structure of stair type is more efficient than a multilayer structure of vertical type because a multi-layer structure of stair type is about 9 $^{\circ}C$ lower than a multilayer structure of vertical type.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.4
• /
• pp.25-32
• /
• 2017

Recently, the use of NAND flash memory is being increased as a secondary device to displace conventional magnetic disk. NAND flash memory, as one among non-volatile memories, has many advantages such as low power, high reliability, low access latency, and so on. However, NAND flash memory has disadvantages such as erase-before-write, unbalanced operation speed, and limited P/E cycles, unlike conventional magnetic disk. To solve these problems, NAND flash memory mainly adopted FTL (Flash Translation Layer). In particular, garbage collection technique in FTL tried to improve the system lifetime. However, previous garbage collection techniques have a sensitive property of the system lifetime according to write pattern. To solve this problem, we propose BSGC (Balanced Selection-based Garbage Collection) technique. BSGC efficiently selects a victim block using all intervals from the past information to the current information. In this work, SFL (Search First linked List), as the proposed block allocation policy, prolongs the system lifetime additionally. In our experiments, SFL and BSGC prolonged the system lifetime about 12.85% on average and reduced page migrations about 22.12% on average. Moreover, SFL and BSGC reduced the average response time of 16.88% on average.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.138-142
• /
• 2019

As the NAND flash memory goes to 3D vertical Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) structure, the lateral charge migration can be critical in the reliability performance. Even more, with miniaturization of flash memory cell device, just a little movement of trapped charge can cause reliability problems. In this paper, we propose a method of predicting the trapped charge profile in the retention mode. Charge diffusivity in the charge trapping layer (Si₃N₄) was extracted experimentally, and the effect on the trapped charge profile was demonstrated by the simulation and experiment.

• Spatial Information Research
• /
• v.20 no.5
• /
• pp.67-76
• /
• 2012

Recently the mobile DBMS (Database Management System) is popular to store and manage large data in a mobile device. Especially, the research and development about mobile storage structure and querying method for navigation map data in a mobile device have been performed. The performance of the mobile DBMS in which random data accesses are most queries if the NAND flash memory is used as storage media of the DBMS is degraded. The reason is that the performance of flash memory is good in writing sequentially but bad in writing randomly as the features of the NAND flash memory. So, new storage structure and querying policies of the mobile DBMS are needed in the mobile DBMS in which a flash memory is used as storage media. In this paper, we have studied the policy of the database page management to enhance the performance of the frequent random update and applied this policy to the navigation-specialized mobile DBMS which supports incremental map update. And also we have evaluated the performance of this policy by experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.975-981
• /
• 2017

In this paper, we propose a method for efficient use of energy when using flash device in WSN environment. Typical Flash devices have a drawback to be an energy efficient storage media in the energy-constrained WSNs due to the high standby energy. An energy efficient approach to deploy Flash devices into WSNs is simply turning the Flash device off whenever idle. In this regard, we make the simple but ideal approach realistic by removing these two obstacles by exploiting nonvolatile RAM (NVRAM), which is an emerging memory technology that provides both non-volatility and byte-addressability. Specifically, we make use of NVRAM as an extension of metadata storage to remove the FTL metadata scanning process that mainly incurs the two obstacles. Through the implementation and evaluation in a real system environment, we verify that significant energy savings without sacrificing I/O performance are feasible in WSNs by turning off the Flash device exploiting NVRAM whenever it becomes idle. Experimental results show that the proposed method consumes only about 1.087% energy compared to the conventional storage device.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.81-86
• /
• 2023

SSD (solid state disk), which is flash memory-based storage device, has the advantages of high density and fast data processing. Therefore, it is being utilized as a storage device for high-capacity data storage systems that manage rapidly increasing big data. However, flash memory, a storage media, has a physical limitation that when the write/erase operation is repeated more than a certain number of times, the cells are worn out and can no longer be used. In this paper, we propose a method for converting defective multi-bit cells into single-bit cells to reduce the defect rate of flash memory and extend its lifetime. The proposed idea distinguishes the defects and treatment methods of multi-bit cells and single-bit cells, which have different physical characteristics but are treated as the same defect, and converts the expected defective multi-bit cells into single-bit cells to improve the defect rate and extend the overall lifetime. Finally, we demonstrate the effectiveness of our proposed idea by measuring the increased lifetime of SSD through simulations.