• 한국가스학회지
• /
• 제13권3호
• /
• pp.33-42
• /
• 2009

부상화염에 대한 연소반응 유동 수치해석을 수행하여 부상높이에 대한 기존 연구 결과들과 비교를 통하여 수치해석 결과의 신뢰성을 검정하였다. 화염전파속도를 결정하는 유동방향변환점을 기존의 연구에서처럼 연료분출속도에 상관없이 일률적인 위치로 선정할 경우 많은 오차를 유발하기 때문에 본 연구에서는 부상화염에서 이론당량비선을 따라 유동속도와 스칼라 소산율 특성을 살펴보았고 화염전파속도를 선정하는 유동방향변환점을 타당하게 선정하는 방법을 정립하였다. 이를 토대로 화염전파속도와 스칼라소산율의 관계식을 도출하여 부상화염에서 화염전파속도 특성을 규명하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.85-91
• /
• 2003

The lift-off characteristics of the triple flame within a diverging duct have been studied experimentally using a multi-slot burner, which can control the concentration gradient and the mean velocity independently. In this experiment the triple flame was stabilized successfully in lift-off condition and flame stabilization with a duct or without a duct, lift-off heights, and some other characteristics were examined for propane flame. It was examined that the effects with various concentration gradient and mean velocity on the triple flame. It was found that minimum value of the lift-off heights exist at a certain concentration gradient for constant mean velocity and flame with a duct is more stable than that without. Moreover the propagation velocity of the flame becomes maximum at a certain concentration gradient regardless of mean velocity.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권2호
• /
• pp.225-231
• /
• 1998

Flame propagation speed characteristics of methante-air mixtures were experimentally investigated in combustion chamber modelled engine. Flame propagation process was known as a funtion of equivalence ratio initial pressure and initial temperature. Ion probe and schlieren photograph were applied to measure the local flame speed and flame radius in quiescent mixtures. Pressure was also measured to make sure of the reproducibility and to apply combustion analysis. Burning velocity was calculated from the flame propagation speed and combustion analysis. Flames were developed faster with higher initial pressure and initial temperature but showed maximum propagation speed at equivalence ratio 1.1 regardless of initial pressure and temperature. Local flame speed was maximum values at near midpoint between center and wall.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.705-709
• /
• 2009

본 연구에서는 석송자 분진입자의 거동에 관한 실험적 연구결과를 바탕으로 한 분진화염 전파모델을 제시하였다. 화염전파속도는 분진농도와 함께 증가하여 석송자의 화학양론농도보다 높은 $170g/m^3$에서 최대로 나타났으며 $500g/m^3$까지 완만하게 감소 경향을 나타낸다. 농도 $47{\sim}200g/m^3$에 있어서, 분진입자속도는 화염전파속도에 비례하여 증가한다. 또한, 연소속도와 입자속도의 합이 화염전파속도에 근사한 값을 나타내고 있어, 분진농도에 따른 화염전파속도를 계산에 의해 추정이 가능하였으며, 입자의 거동이 분진의 화염전파속도를 이해하는데 유용하다는 것을 알 수 있었다.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.16-23
• /
• 2013

정상초음파장이 개재하는 메탄/공기 예혼합화염의 전파특성에 대한 당량비의 영향을 실험적 연구결과로 제시한다. 화염구조 가시화는 슐리렌 기법을 이용하였으며, 이미지 후처리를 통해 화염 전파 거동을 면밀히 관찰하였다. 정상초음파에 의한 화염 구조 변화가 연소반응을 촉진시켜 화염 전파속도를 증가시키는 것을 알 수 있었으며, 당량비가 증가할수록 정상초음파에 의한 화염전파속도의 증분은 감소하게 되고, 속도변화가 미미한 당량비 구간이 존재한다는 사실을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3282-3292
• /
• 1996

Flow velocity was measured using a hot wire anemometer. Turbulence intensity was in proportion to mean flow velocity regardless of swirl velocity. And integral length scale has proportional relation with swirl velocity regardless of measurement position. Flame speed calculated by radius of visualized flame was increased and then decreased according to lapse of time from spark. Maximum flame speed was increased according to increase of turbulence intensity. Burning speed and flame transport effect increased with increase of swirl velocity, but ratio of burning speed to flame speed decreased with increased of swirl velocity. Mass fraction burned versus volume fraction burned was increased in proportion to the increase of turbulence intensity, caused by increase of combustion promotion effect according to increase of turbulence intensity and scale.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.477-485
• /
• 2009

The study of nitrogen dilution effect on the flame stability was experimentally investigated in a non-premixed turbulent lifted hydrogen jet with coaxial air. Hydrogen gas was used as a fuel and coaxial air was used to make flame liftoff. Each of hydrogen and air were injected through axisymetric inner and outer nozzles ($d_F=3.65\;mm$ and $d_A=14.1\;mm$). And both fuel jet and coaxial air velocity were fixed as $u_F=200\;m/s$ and $u_A=16\;m/s$, while the mole fraction of nitrogen diluents gas was varied from 0.0 to 0.2 with 0.1 step. For the analysis of flame structure and the flame stabilization mechanism, the simultaneous measurement of PIV/OH PLIF laser diagnostics had been performed. The stabilization point was selected in the most upstream region of the flame base and defined as the point where the turbulent flame propagation velocity was equal to the axial component of local flow velocity. We found that the turbulent flame propagation velocity increased with the decrease of nitrogen mole fraction. We concluded that the turbulent flame propagation velocity was expressed as a function of turbulent intensity and axial strain rate, even though nitrogen diluents mole fraction was changed.

• 한국연소학회지
• /
• 제7권3호
• /
• pp.47-54
• /
• 2002

The propagation speed of tribrachial flame in laminar propane jets has been investigated experimentally under normal and micro gravity conditions. The displacement speed was found to vary nonlinearly with axial distance because flow velocity along stoichiometric contour was comparable to the propagation speed of tribrachial flame for the present experiment. Approximate solutions for velocity and concentration accounting density difference and virtual origins have been used in determining the propagation speeds of tribrachial flame. Under micro gravity condition, the results showed that propagation speed of tribrachial flame is largely affected by the mixture fraction gradients, in agreement with previous studies. The limiting maximum value. of propagation speeds under micro gravity conditions are in good agreement with the theoretical prediction, that is, the ratio of maximum propagation speed to the stoichiometric laminar burning velocity is proportional to the square root of the density ratio of unburned to burnt mixture.

• 대한기계학회논문집B
• /
• 제33권1호
• /
• pp.38-45
• /
• 2009

Oxy-fuel combustion of pulverized coal is one of the promising new technologies to reduce $CO_2$ and NOx from coal combustion. However, the stability of pulverized coal flame is reduced in the oxy-fuel combustion. This flame stability is concerned with the flame propagation that is affected by surrounding gas and coal characteristics, such as gas temperature, gas composition, coal volatile, coal activation energy and coal size. In this paper, a study on the influence of surrounding gas and coal characteristics on the flame propagation velocity in oxy-fuel combustion of pulverized coal was preformed. One dimensional model was used to calculate the flame propagation velocity of pulverized coal clouds. In this model, the radiation is considered to be the main source of heat exchange, and Monte Carlo method was adopted for accurate calculation of radiation heat flux. It was found that the flame propagation velocity become higher with the decrease of coal activation energy and the increase of coal volatile. Also, according to the increase of gas temperature and $O_2$ concentration, flame propagation velocity increased.

• 한국가스학회지
• /
• 제24권3호
• /
• pp.20-26
• /
• 2020

본 연구에서는 폭발 공간에 존재하는 장애물에 의한 메탄-공기 혼합기의 폭발압력 및 화염전파속도의 영향을 조사하기 위해 실험적 조사를 수행하였다. 밀폐된 폭발 공간에서의 폭발압력 및 화염전파속도에 대한 장애물의 영향을 일반화하기 위해서 장애율이라고 하는 정량화된 파라메타를 사용하였다. 실험 결과 장애물 개수에 관계없이 장애율이 증가할수록 폭발압력과 화염전파속도가 증가하였다. 또한 10 % 메탄가스의 동일한 농도조건에서, 장애물이 없는 경우(장애율 = 0)의 화염전파속도는 3.46 m / s가 얻어졌으며, 장애물 3개 및 장애율 0.98 인 경우는 24.24 m / s로서 약 7 배가 증가하였다. 동일한 장애율에서는 장애물 개수가 증가할수록 폭발압력 및 화염전파속도가 급격히 증가하였다.