• 제목/요약/키워드: fixing equipment

검색결과 42건 처리시간 0.02초

유닛모듈 운반용 고정장치의 하중거동 비교 분석 (A comparative analysis of load behavior of the fixing equipments for transporting unit modules)

  • 김균태;김석;전영훈;김태영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 춘계 학술논문 발표대회
    • /
    • pp.146-147
    • /
    • 2015
  • This paper compares load behavior of two fixing equipments for transporting unit modules. The suggested fixing equipment shows higher limit load than an existing fixing equipment, which proves that the suggested fixing equipment have higher safety.

  • PDF

운반하중의 확률분포를 활용한 유닛모듈 운반용 고정장치 개발 (The Development of Fixing Equipment of the Unit Module Using the Probability Distribution of Transporting Load)

  • 박남천;김석;김균태
    • 한국산학기술학회논문지
    • /
    • 제16권6호
    • /
    • pp.4267-4275
    • /
    • 2015
  • 조립식 주택은 기존 RC공법과 달리 사전에 전체공사의 약 60-80%를 유닛모듈 형태로 공장 제작하고, 차량을 이용하여 현장까지 운반 후 각 모듈을 결속하여 시공한다. 조립식 주택은 공장제작을 통한 급속시공이 가능한 장점이 있지만, 모듈을 현장까지 운반하는 과정에서 모듈 탈락의 우려가 있으며, 이로 인한 모듈의 변형 및 외장재의 파손이 발생할 수 있다. 본 연구는 기존의 모듈운반 고정장치의 문제점을 분석하고 개선된 고정장치를 제안하였다. 고정장치 개선안을 도출하기 위해 고정장치에 가해지는 운반하중을 몬테카를로 시뮬레이션을 이용하여 분석하고, 비선형 유한요소 해석을 통한 구조적 성능을 검증하였다. 유닛모듈의 하중분포는 통계분석을 통해 3개 유사하중 그룹으로 구분되며, 극단값 분포(Extreme Value Distribution)와 가장 유사한 하중분포를 가진 것으로 분석되었다. 통계분석 및 몬테카를로 시뮬레이션을 통해, 운반하중의 최대값(28.9kN) 및 95% 신뢰도 범위 내 하중값(-1.22~9.5kN)을 계산하였다. 비선형 구조해석 결과는 본 연구에서 제시한 고정장치 개선안이 한계하중 35.3kN까지 파괴가 일어나지 않았으며, 95% 신뢰도 범위 내 하중에서도 충분히 견뎌내는 강성을 지니고 있음을 보여주고 있다.

유한요소기법을 이용한 고소작업대의 파손된 고정볼트의 피로 파손 분석 (A Fatigue Failure Analysis of Fractured Fixing Bolts of a Mobile Elevating Work Platform using Finite Element Methods)

  • 최동훈;김재훈
    • 한국안전학회지
    • /
    • 제35권5호
    • /
    • pp.1-8
    • /
    • 2020
  • Mobile elevating work platforms (MEWPs) consist of a work platform, extending structure, and chassis, and are used to move persons to working positions. MEWPs are useful but are composed of pieces of equipment, and accidents do occur owing to equipment defects. Among these defects, accidents caused by the fracture of bolts fixed to the extension structure and swing system are increasing. This paper presents a failure analysis of the fixing bolts of MEWP. Standard procedure for failure analysis was employed in this investigation. Visual inspection, chemical analysis, tensile strength measurement, microstructural characterization, fractography analysis by Optical Microscope(OM) and Scanning Electron Microscopy(SEM), and finite element analysis (FEA) were used to analyze the failure of the fixing bolts. Using this failure analysis approach, we found the root cause of failure and proposed a means for solving this type of failure in the future. First, the chemical composition of the fixing bolt is obtained by a spectroscopy chemical analysis method, which determined that the chemical composition matched the required standard. The tensile test showed that the tensile and yield strengths were within the required capacity. The stress analysis was carried out at five different boom angles, and it was determined that the fixing bolt of MEWP can withstand the loads at all the boom angles. The outcomes of the fatigue analysis revealed that the fixing bolt fails before reaching the design requirements. The results of the fatigue analysis showed primarily that the failure of the fixing bolt was due to fatigue. A visual inspection of the fractured section of the fixing bolt also confirmed the fatigue failure. We propose a method to prevent failure of the fixing bolt of the MEWP from four different standpoints: the manufacturer, safety certification authority, safety inspection agency, and owner.

유압 디바이스 성능 검사 장비 자동화 공정 개발 (Development of Hydraulic Device Performance Test Equipment Automation Process)

  • 김홍록;정원지;설상석;박상혁;이경태
    • 한국기계가공학회지
    • /
    • 제19권10호
    • /
    • pp.74-80
    • /
    • 2020
  • Crawler-type hydraulic devices facilitate forward and backward driving of construction equipment by converting power into mechanical energy. The existing hydraulic device performance test process is time- and labor-intensive. This study aims to improve efficiency and productivity by automating the hydraulic device production performance test processes, which have been separately conducted so far. We also used SolidWorksⓇ, a 3D modeling program, and ANSYSⓇ, a structural analysis tool, for structural analysis and to verify the suitability of fixing pins required for connecting a hydraulic device to performance test equipment. Our results that employing an automated hydraulic device performance test process improves efficiency.

Improvement of the Accuracy of Supershort Baseline Acoustic Positioning System by Kalman Filter

  • PARK Hae-Hoon;YOON Gab-Dong
    • 한국수산과학회지
    • /
    • 제23권6호
    • /
    • pp.451-456
    • /
    • 1990
  • Underwater acoustic navigation and position fixing systems have been extensively used not only in surface position fixing but also in underwater position fixing. Tn recently, application of these systems has been in the field of underwater inspection of offshore platforms, where it is vital to track the position of an unmanned submersible or diver carrying underwater cameras and nondestructive testing equipment. But these systems are included the fixing errors as results of a signal with additive noise, the attenuation of sound and the interference effects due to multipath reflection and forward scattering. In this paper to improve the position fixing by the supershort baseline acoustic position system, a method to apply the Kalman filter to the fix of the system is proposed and the digital simulation under noise condition is conducted. The optimal positions by the Kalman filter are compared with original positions, and it is confirmed that the results of the pro-posed method are evidently more accurate.

  • PDF

고소작업대의 파손된 고정볼트의 피로분석에 관한 연구 (A Fatigue Analysis Study on the Fractured Fixing Bolts of Mobile Elevated Work Platforms)

  • 최동훈;김재훈
    • 한국안전학회지
    • /
    • 제34권5호
    • /
    • pp.1-6
    • /
    • 2019
  • The mobile elevated work platforms(MEWPs) consist of work platform, extending structure, and car, and it is a facility to move persons to working positions. MEWPs are useful but composed complex pieces of equipments, and accidents are caused by equipment defects. Among them, accidents caused by fracture of the bolts fixing the extension structure and the turntable are increasing. In this study, fatigue failure and fatigue life of a turntable fixing bolt subjected to irregular fatigue load were analyzed by FEA. For this purpose, finite element modeling is proposed and structural analysis and fatigue analysis are performed simultaneously for fixing bolts. As a result of the structural analysis, it was confirmed that there is no risk of permanent deformation because the maximum stress acting on the fixing bolt is lower than the yield strength, and fatigue analysis was confirmed that the fatigue life is less than the design standard. The fatigue analysis results of this study can be effectively used for the design and the documentary assessment of the safety certification of the MEWPs by examining the fatigue life of the turntable fixing bolt.

추락방지 생명줄 고정후크 개발 연구

  • 배달윤;방명석
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2013년 춘계학술대회
    • /
    • pp.457-462
    • /
    • 2013
  • Most frequently happening accident in construction working sites was fall in high and dangerous position. Most of fall accidents resulted in serious injury or death of workers. In this research was analysed recent safety accidents for three years from 2010' to 2012 and was developed the safety equipment to be able to efficiently prevent and reduce fall accidents. This new safety equipment can be easily fixed to the reinforcing steel or steel girder etc by the fixing hook of life saving line and is comfortablely portable because of its light weight. The questionnaire study of the developed equipment was performed to investigate the problem in the view point of using in real sites. The result shows that the new fixing fook can reduce fall accidents and satisfy construction workers.

  • PDF

PDM ZCS Resonant High Frequency Inverter for Induction Heated Roller

  • Kang, Shin-Chul
    • Journal of information and communication convergence engineering
    • /
    • 제6권3호
    • /
    • pp.301-304
    • /
    • 2008
  • This paper presents a lossless inductor snubber-assisted series resonant high frequency inverter using the trench gate IGBTs for the electromagnetic induction eddy current-heated fixing roller in copy and printing machines in a new generation. This soft switching high-frequency inverter can completely achieve zero current soft switching (ZCS) commutation mode transitions and wide power regulation under its constant frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally presented for a constant frequency PDM strategy under a ZCS operation, together with its output power regulation characteristics-based on the pulse density modulation. The effectiveness of this soft switching high-frequency inverter is confirmed for the fixing equipment with the induction-heated fixing roller.

이동식 크레인의 접지설계 시스템 (Mobile Crane Ground-Fixing System)

  • 호종관;서종민;김선국
    • KIEAE Journal
    • /
    • 제7권6호
    • /
    • pp.83-90
    • /
    • 2007
  • A mobile crane has been more frequently used to deal with the increased capital-intensive projects in line with the economic growth, but the operation is still heavily dependent on personal experience in the past, resulting in severe overturn accidents that cause the loss of lives and damage to the properties. A crane shall be installed in a systematic manner that proved to be safe in engineering aspect, and should the installation and operation be blindly dependent on experience alone, it would apparently cause a great risk. Particularly the mobile crane, among others, frequently causes a severe overturn accident due to poor ground-fixing device. The study therefore focused on fixing system of mobile crane and the outcome is highly expected to make a great commitment to selecting the optimal type of crane for the project as well as to securing the safety during construction.

패키지 기판 습식 공정용 클램프 이송 장치의 개발 (Development of Clamp Type Transferring Mechanism for Package Substrate's Wet Process)

  • 유선중;허준연;조승현
    • 한국정밀공학회지
    • /
    • 제28권2호
    • /
    • pp.193-201
    • /
    • 2011
  • Clamp type transferring mechanism for package substrate's wet processes was newly developed instead of conventional roller type transferring mechanism. Clamp type transferring mechanism has the advantages of reducing the panel deflection and of minimizing the contact problem between the panel and the transferring mechanism. Individual clamp of the mechanism has two distinct mechanical functions which are perfectly fixing a panel during the transferring and generating adequate tension for the panel. To determine the mechanical parameters of the clamp, panel deflection simulation was conducted and the result was verified by the panel deflection measurement. Also, fixing angle of a clamp could be determined by the free body force analysis of individual clamp. Finally clamp type transferring mechanism was actually manufactured and the transferring performance was verified during the water spraying condition of the package substrate's wet processes.