• Journal of Software Assessment and Valuation
• /
• v.14 no.1
• /
• pp.9-17
• /
• 2018

In many respects, the use and importance of open source software in companies and individuals are increasing as the days pass. However, software evaluation for users, software classification of filtering fundamentals research can not deal flexibly according to the characteristics of open source software. They are using a fixed classification system. In this research, we provide a classification model of open source software that can flexibly deal with the classification of open source software and the software category of new open source software.

• Proceedings of the KSPS conference
• /
• 2003.10a
• /
• pp.109-112
• /
• 2003

In real time packetized voice applications, missing frames is a major source of voice quality degradation. Thus packet loss concealment(PLC) algorithms are needed to guarantee the QoS of the VoIP. Still current speech codecs for VoIP work poor when consecutive packet losses are issued. In this paper, we proposed a new PLC algorithm for the G.729 codec. Our algorithm works better especially when the consecutive packet loss occurs mainly because it adopts an adaptive gain controller utilizing the number of missing packet information combined with a fixed codebook vector estimation algorithm and LPC bandwidth expansion.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.340-346
• /
• 2013

This paper describes a helicopter vibration induced by main rotor in forward flight. The hub loads in the fixed frame, which are dominant source of helicopter vibration, are obtained by multi-blade summation of rotating blades loadings. The components of 3/rev, 4/rev, and 5/rev blades loadings are transmitted by blades to 4/rev hub loads in the fixed frame. The vertical vibrations of helicopter at pilot seat and copilot seat are calculated through rigid body transfer functions considering airframe to be rigid body. The blades are assumed to be elastic and undergo the flap, lag, and torsion motion and free wake aerodynamic model is used to calculate the precise blade loadings in the analysis. The 4/rev vertical vibration responses are analyzed from rotating blade loadings and fixed hub loadings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1138-1146
• /
• 2008

This paper considers 2-hop wireless cooperative communications networks with fixed decode-and-forward relays. Specifically, we first derive the closed-form BER expression for theoretically evaluating the end-to-end performance of these networks. Then, based on this expression and long-tenn fading statistics, we propose a power allocation method for source and relay. Such a method brings about multiple advantages in tenn of spectral efficiency and implementation complexity over other power allocation methods based on instantaneous fading statistics. A variety of numerical results reveal that the cooperative communications scheme with the proposed power allocation significantly outperforms that with the equal power allocation and the direct transmission scheme for any position of the relay subject to the same total transmit power constraint.

• Journal of Biomedical Engineering Research
• /
• v.28 no.1
• /
• pp.95-101
• /
• 2007

Recently, small-animal imaging technology has been rapidly developed for longitudinal screening of laboratory animals such as mice and rats. One of newly developed imaging modalities for small animals is an x-ray micro-CT (computed tomography). We have developed two types of x-ray micro-CT systems for small animal imaging. Both systems use flat-panel x-ray detectors and micro-focus x-ray sources to obtain high spatial resolution of $10{\mu}m$. In spite of the relatively large field-of-view (FOV) of flat-panel detectors, the spatial resolution in the whole-body imaging of rats should be sacrificed down to the order of $100{\mu}m$ due to the limited number of x-ray detector pixels. Though the spatial resolution of cone-beam CTs can be improved by moving an object toward an x-ray source, the FOV should be reduced and the object size is also limited. To overcome the limitation of the object size and resolution, we introduce zoom-in micro-tomography for high-resolution imaging of a local region-of-interest (ROI) inside a large object. For zoom-in imaging, we use two kinds of projection data in combination, one from a full FOV scan of the whole object and the other from a limited FOV scan of the ROI. Both of our micro-CT systems have zoom-in micro-tomography capability. One of both is a micro-CT system with a fixed gantry mounted with an x-ray source and a detector. An imaged object is laid on a rotating table between a source and a detector. The other micro-CT system has a rotating gantry with a fixed object table, which makes whole scans without rotating an object. In this paper, we report the results of in vivo small animal study using the developed micro-CTs.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.32-42
• /
• 1990

The method using Rankine Soure distribution over the hull surface and undisturbed free surface was applied to calculate the free surface flow around a ship. The ship hull as well as a local portion of the undisturbed free surface arc geometrically represented by quadrilateral panels and the source density is determined so as to satisfy the linearized free surface condition based on the double model flow. The pressure distribution, wave resistance, wave profile and hydrodynamic sinkage force and trim moment for the Wigley hull and the Series 60 hull with $C_B=0.60$ were calculated in the fixed condition. The calculated results were compared with the measured values. The dependance of the solution on the panel arrangement, particularly on the free suraface, was also studied through 11 numerical test cases for the Wigley hull.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.483-489
• /
• 2009

The Time Difference of Arrival (TDOA) algorithm is being used widely for identifying the location of a source emanating either electrical or acoustic signal. It's application areas will not be limited to identifying the source at a fixed location, for example the origin of an earthquake, but will also include the trajectory monitoring for a moving source equipped with a GPS sensor. Most of the TDOA algorithm uses time correlation technique to find the time delay between received signals, and therefore difficult to be used for identifying the location of multiple sources. In this paper a TDOA algorithm based on cross-spectrum is developed to find the trajectory of two sound sources with different frequencies. Although its application is limited to for the sources on a disk plane, but it can be applied for identifying the locations of more than two sources simultaneously.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.163-171
• /
• 2003

In this paper, we develop an approach toward Joint Source-Channel Coding for MPEG-4(Moving picture Experts Group) based video coding In fixed and mobile reception environment. We have considered channel environment of AWGN and mobile reception. The source coder used MPEG-4 video. the channel coder used RCPC(Rate Compatible Punctured Convolution) and the modulation method used QPSK(Quadrature Phase Shift Keying) modulation. This study determined optimum Trade-off point between source bit rate and channel coding rate In variable channel states. We compared Joint Source/channel Coding method and general constant bit rate transmission. In this results, Joint Source/channel Coding was appeared better performance than constant bit rate transmission.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.6
• /
• pp.445-453
• /
• 2016

Fixed robust routing is attracting attention as routing that achieves high robustness against changes in traffic patterns without conducting traffic measurement and performing dynamic route changes. Fixed robust routing minimizes the worst-case maximum link load by distributing traffic of every source-destination (s-d) router pair onto multiple candidate paths (multipath routing). Multipath routing, however, can result in performance degradation of Transmission Control Protocol (TCP) because of frequent out-of-order packet arrivals. In this paper, we first investigate the influence of multipath routing on TCP performance under fixed robust routing with a simulation using ns-2. The simulation results clarify that TCP throughput greatly degrades with multipath routing. We next propose a candidate path selection method to improve TCP throughput while suppressing the worst-case maximum link load to less than the allowed level under fixed robust routing. The method selects a single candidate path for each of a predetermined ratio of s-d router pairs in order to avoid TCP performance degradation, and it selects multiple candidate paths for each of the other router pairs in order to suppress the worst-case maximum link load. Numerical examples show that, provided the worst-case maximum link load is less than 1.0, our proposed method achieves about six times the TCP throughput as the original fixed robust routing.

• Safety and Health at Work
• /
• v.2 no.2
• /
• pp.148-157
• /
• 2011

Objectives: Although compensation for occupational injuries and diseases is guaranteed in almost all nations, countries vary greatly with respect to how they organize workers' compensation systems. In this paper, we focus on three aspects of workers' compensation insurance in Organization for Economic Cooperation and Development (OECD) countries - types of systems, employers' funding mechanisms, and coverage for injured workers - and their impacts on the actual frequencies of occupational injuries and diseases. Methods: We estimated a panel data fixed effect model with cross-country OECD and International Labor Organization data. We controlled for country fixed effects, relevant aggregate variables, and dummy variables representing the occupational accidents data source. Results: First, the use of a private insurance system is found to lower the occupational accidents. Second, the use of risk-based pricing for the payment of employer raises the occupational injuries and diseases. Finally, the wider the coverage of injured workers is, the less frequent the workplace accidents are. Conclusion: Private insurance system, fixed flat rate employers' funding mechanism, and higher coverage of compensation scheme are significantly and positively correlated with lower level of occupational accidents compared with the public insurance system, risk-based funding system, and lower coverage of compensation scheme.