• 한국추진공학회지
• /
• 제15권6호
• /
• pp.56-62
• /
• 2011

본 연구에서는 과산화수소와 케로신을 사용하는 소형 이원추진제 액체로켓엔진의 점화원으로서, 과산화수소의 촉매 반응에 의한 고온의 분해 가스와 케로신의 자연 발화를 이용하는 촉매형 점화기에 대한 연구를 수행하였다. 먼저 점화기를 설계하기 위해 열역학적 상용코드프로그램인 CEA를 사용하여 점화기 유량 및 혼합비를 선정하고 촉매형 점화기를 설계/제작하였으며, 점화 성공 및 지연 등을 판단하기 위한 가시화창과 분해 가스의 온도 분포를 파악하기 위한 열전대 장착이 가능한 연소실을 설계제작하였다. 분해 가스 유속을 결정하는 고정링(fixed ring)의 출구 면적 변화와 혼합비 변화에 따른 점화 성능 시험을 수행하였다. 결과적으로 쵸킹 면적보다 큰 출구 면적에서와 혼합비 6~8 사이에서 안정적인 점화 성능을 보임을 확인하였다.

• 정보처리학회논문지B
• /
• 제11B권2호
• /
• pp.199-206
• /
• 2004

본 논문에서는 고정점 알고리즘과 신호의 시간적 상관성을 적응 조정한 견실 알고리즘의 조합형 독립성분분석을 제안하였다. 여기서 고정점 알고리즘은 뉴우턴법의 경신규칙에 기초한 방법으로 빠른 분석속도와 우수한 분석성능을 얻기 위함이고, 견실 알고리즘은 시간적 상호 의존성이나 낮은 쿠토시스를 가지는 신호도 효과적으로 분석하기 위함이다. 특히 견실 알고리즘에서 경험적으로 설정되던 최대지연시간을 신호상호간의 자기상관함수를 이용하여 적응 조정되도록 함으로써 그 성능을 더욱 더 개선하였다. 제안된 독립성분분석을 500개 샘플을 가시는 4개의 신호와 $512\times512$ 픽셀의 10개 영상으로부터 임의의 혼합행렬에 따라 발생되는 혼합신호와 혼합영상 각각의 분리에 적용한 결과, 고정점 알고리즘의 독립성분분석 및 고정점 알고리즘과 최대시간지연을 경험적으로 설정하는 기존의 견실 알고리즘을 단순히 조합한 독립성분분석에 비해 분리속도와 분리률에서 개선된 성능이 있음을 확인하였다. 특히 문제의 규모가 증가할수록 분석성능의 개선정도도 증가함을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.890-893
• /
• 2010

무선 센서 네트워크에서 각 노드들은 일반적으로 자체 충전이 어려운 배터리를 전원으로 사용하고 배터리 방전시의 교체도 어렵기 때문에 제한된 에너지원 내에서의 각 노드들의 수명 연장을 위한 연구는 중요한 이슈가 되어 왔다. 그래서 각 노드들의 에너지 소비량을 최소한으로 하는 많은 방법들이 제안되었으며 특히 에너지 효율적인 MAC 프로토콜에 관한 연구가 활발히 진행되었다. 그 중 경쟁 기반 MAC 프로토콜인 T-MAC은 S-MAC의 고정된 듀티 사이클에 적응성을 추가한 프로토콜로서 각 노드가 활성 모드에서 수면 모드로 진입하기 전 고정된 timeout을 주게 된다. 이 고정된 timeout 내에서 송수신되는 데이터가 없으면 각 노드들은 수면 모드로 진입하게 되는데 timeout은 항상 고정되어 있기 때문에 송수신 되는 데이터가 없을 때에는 불필요한 에너지 소비를 발생시킨다. 본 논문에서는 확률적으로 timeout을 분석하고 확률에 따른 timeout을 제공하여 timeout 동안의 불필요한 에너지 소모를 줄임으로서 에너지의 효율을 높일 수 있는 적응형 timeout 기반 MAC 프로토콜을 제안한다.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.864-871
• /
• 2002

Acoustic emission(AE) technique has been applied to not only mechanical property testing but also on-line monitoring of the entire structure or a limit zone only. Although several AE devices have already been developed for on-line monitoring, the price of these systems is very high and it is difficult for the field to apply yet. In this study, we developed a specially designed PC-based leak detection system using A/D board. In this paper, AE technique has been applied to detect leak for heat exchanger by analyzing the characteristics of signal obtained from leak. It was confirmed that the characteristics of the signal generated by the turbulence of gas in the heat exchanger is narrow band signal having between 130-250kHz. Generally, the amplitude of leak signal is increased as the leak size increasing, but showed no significant change at frequency characteristic. Leak source location can be found by determining for the paint of highest signal amplitude by comparing with several fixed sensors. In this paper, AE results are compared with the PC-based leak detection system using A/D board.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권2호
• /
• pp.110-120
• /
• 2006

There have been developed many structural and fluid rotorcraft analysis models in rotorcraft community, and also lots of investigations have been conducted to combine these two models. These investigations turn out to be good at predicting the airloads precisely, but they have not taken the blade nonlinear deflection into account. For this reason, the present paper adopts a sophisticated structural model which can describe three-dimensional nonlinear deflection of the blade. And it is combined with two types of aerodynamic model. First one is generalized Greenberg type of finite-time aerodynamic model, which is originally established for a fixed wing, but later modified to be suitable for coupled flap-lag-torsional aeroelastic analysis of the rotor blade. Second aerodynamic model is based on the unsteady source-doublet panel method coupled with a free wake model. The advantages of the present method are capabilities to consider thickness of the blade and more precise wake effects. Transient responses of the airloads and structural deflections in time domain are mainly analyzed in this paper.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1657-1668
• /
• 1998

In the analysis of a mushy solidification system with natural convection using a fixed grid method, the enthalpy method has been used to account for the release of latent heat. The variable viscosity, Darcy source, and hybrid methods have been employed for the velocity suppression in a mushy region. The choice of the values of solid viscosity and permeability constant in conjunction with the Darcy source term plays an important role in forming the location and shape of the phase boundaries. In this work the effects of these major parameters related to steady-state behavior in the system of mushy solidification are investigated through a simple test problem. The effective specific heat based on the spatial gradients of the enthalpy and temperature is adopted for the treatment of the release of latent heat. The effects of the Prandtl and Rayleigh numbers on the shape of mushy region are examined using the hybrid method.

• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.317-325
• /
• 2012

Resonant immittance converter (RIC) topologies can transform a current source into a voltage source (Type-I RICs) and vice versa (Type-II RICs), thereby making them suitable for many power electronics applications. RICs are operated at a fixed frequency where the resonant immittance network (RIN) exhibits immittance conversion characteristics. It is observed that the low-frequency response of Type-II RINs is relatively flat and that the state variables associated with Type-II RINs affect the response only at the high frequencies in the vicinity of the switching frequency. The overall response of a Type-II RIC is thus dominated by the filter response, which is particularly important for the controller design. Therefore, an approximate equivalent circuit model and a small-signal model of Type-II RICs are proposed in this paper, neglecting the high-frequency response of Type-II RINs. While the proposed models greatly simplify and speed-up the analysis, it adequately predicts the open-loop transient and small-signal ac behavior of Type-II RICs. The validity of the proposed models is confirmed by comparisons of their results with those obtained from a cycle-by-cycle simulation and with an experimental prototype.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1244-1255
• /
• 2017

The space vector pulse width modulation (SVPWM) technique is a popular PWM method for medium voltage drive applications. Conventional SVPWM (CSVPWM) and bus clamped SVPWM (BCSVPWM) are the most common SVPWM techniques. This paper evaluates the performance of various advanced BCSVPWM strategies in terms of their harmonic distortion and switching loss based on a uniform frame work. A uniform frame work, pulse number captures the performance parameter variations of different SVPWM strategies for various number of samples with heterogeneous pulse numbers. This work compares different advanced BCSVPWM techniques based on the modulation index and location of the clamping position (zero vector changing angle ) of a phase in a line cycle. The frame work provides a fixed fundamental frequency of 50Hz. The different BCSVPWM switching strategies are implemented and compared experimentally on a 415V, 2.2kW, 50Hz, 3-phase induction motor drive which is fed from an IGBT based 2 KVA voltage source inverter (VSI) with a DC bus voltage of 400 V. A low cost PIC microcontroller (PIC18F452) is used as the controller platform.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권6호
• /
• pp.1627-1648
• /
• 2012

We propose an adaptive method for detecting plagiarized pairs from a large set of source code. This method is adaptive in that it uses an adaptive algorithm and it provides an adaptive threshold for determining plagiarism. Conventional algorithms are based on greedy string tiling or on local alignments of two code strings. However, most of them are not adaptive; they do not consider the characteristics of the program set, thereby causing a problem for a program set in which all the programs are inherently similar. We propose adaptive local alignment-a variant of local alignment that uses an adaptive similarity matrix. Each entry of this matrix is the logarithm of the probabilities of the keywords based on their frequency in a given program set. We also propose an adaptive threshold based on the local outlier factor (LOF), which represents the likelihood of an entity being an outlier. Experimental results indicate that our method is more sensitive than JPlag, which uses greedy string tiling for detecting plagiarism-suspected code pairs. Further, the adaptive threshold based on the LOF is shown to be effective, and the detection performance shows high sensitivity with negligible loss of specificity, compared with that using a fixed threshold.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권9호
• /
• pp.4271-4294
• /
• 2018

Communication cost is the most important factor in Wireless Sensor Networks (WSNs), as exchanging control keying messages consumes a large amount of energy from the constituent sensor nodes. Time-based Dynamic Keying and En-Route Filtering (TICK) can reduce the communication costs by utilizing local time values of the en-route nodes to generate one-time dynamic keys that are used to encrypt reports in a manner that further avoids the regular keying or re-keying of messages. Although TICK is more energy efficient, it employs no re-encryption operation strategy that cannot determine whether a healthy report might be considered as malicious if the clock drift between the source node and the forwarding node is too large. Secure SOurce-BAsed Loose Synchronization (SOBAS) employs a selective encryption en-route in which fixed nodes are selected to re-encrypt the data. Therefore, the selection of encryption nodes is non-adaptive, and the dynamic network conditions (i.e., The residual energy of en-route nodes, hop count, and false positive rate) are also not focused in SOBAS. We propose an energy efficient selection of re-encryption nodes based on fuzzy logic. Simulation results indicate that the proposed method achieves better energy conservation at the en-route nodes along the path when compared to TICK and SOBAS.