• Journal of Environmental Health Sciences
• /
• v.36 no.4
• /
• pp.323-336
• /
• 2010

We evaluated the properties of a fixed-bed column reactor for high-concentration tetrachloroethylene (PCE) removal. The anaerobic bacterium Clostridium bifermentans DPH-1 was able to dechlorinate PCE to cis-1,2-dichloroethylene (cDCE) via trichloroethylene (TCE) at high rates in the monoculture biofilm of an upflow fixed-bed column reactor. The first-order reaction rate of C. bifermentans DPH-1 was relatively high at $0.006\;mg\;protein^{-1}{\cdot}l{\cdot}h^{-1}$, and comparable to rates obtained by others. When we gradually raised the influent PCE concentration from $30\;{\mu}M$ to $905\;{\mu}M$, the degree of PCE dechlorination rose to over 99% during the operation period of 2,000 h. In order to maintain efficiency of transformation of PCE in this reactor system, more than 6 h hydraulic retention time (HRT) is required. The maximum volumetric dechlorination rate of PCE was determined to be $1,100\;{\mu}mol{\cdot}d^{-1}l$ of reactor $volume^{-1}$, which is relatively high compared to rates reported previously. The results of this study indicate that the PCE removal performance of this fixed-bed reactor immobilized mono-culture is comparable to that of a fixed-bed reactor mixture culture system. Furthermore, our system has the major advantage of a rapid (5 days) start-up time for the reactor. The flow characteristics of this reactor are intermediate between those of the plug-flow and complete-mix systems. Biotransformation of PCE into innocuous compounds is desirable; however, unfortunately cDCE, which is itself toxic, was the main product of PCE dechlorination in this reactor system. In order to establish a system for complete detoxification of PCE, co-immobilization of C. bifermentans DPH-1 with other bacteria that degrade cDCE aerobically or anaerobically to ethene or ethane may be effective.

• Ocean and Polar Research
• /
• v.25 no.3
• /
• pp.277-286
• /
• 2003

Nitrification performance of fixed film biofilters using coarse sand, loess bead, or styrofoam beads in biofilter columns 1 meter high and 30cm in diameter were studied at different hydraulic and organic matter loading rates. Synthetic wastewater was supplied to the culture tank in order to maintain desired TAN concentrations in inlet water to biofilters. All the biofilters were conditioned 5 months before start of sampling. TAN and $NO_2-N$ conversion rates increased with an increase in the hydraulic loading rate (HLR). However, the improvement in biofilter performance was not linearly correlated to HLR in styrofoam bead filters. This is mainly due to the characteristics of the styrofoam beads used. TAN conversion rates of sand filters increased with the increase of HLR up to $200m^3/m^2$. per day. No increase in the TAN conversion rate was observed at the highest HLR since flooding on the media surface took place. HLR had a significant impact on the TAN conversion rates in loess bead filter up to the highest HLR tested (P<0.05). TAN conversion rates were much less at organic matter loading rates of 9 and 18kg $O_2/m^3$ per day than those without the addition of organic matter in styrofoam bead filters. The addition of glucose resulted in a reduction of the TAN conversion rate from 540 to 284g $TAN/m^3$ per day. No significant difference of TAN conversion rates between the two organic matter loading rates was found (p<0.05). This indicates that the impact of organic matter on nitrification becomes less and less sensitive with an increase in the COD/TAN ratio. At an organic matter loading rate of 9kg $O_2/m^3$. per day, a great reduction of TAN conversion rates was observed in sand filters and loess bead filters. Clearly, organic matter can be one of the most Important Impacting factors on nitrification. $NO_2-N$ conversion rates showed a similar trend for TAN. Based on the TAN and nitrite conversion rates, styrofoam beads showed the best performance among the three filter media tested. Also, the low gravity and price of styrofoam beads make the handling easier and more cost-effective for commercial application. The results obtained at the highest organic matter loading rates can be used in the biofilter design in recirculating aquaculture system.

• Journal of Aquaculture
• /
• v.16 no.4
• /
• pp.203-209
• /
• 2003

Nitrification efficiency of fixed film biofilters with sand, loess bead, and styrofoam bead in biofilter columns of 1-m height and 30 cm width was studied. Synthetic wastewater was continuously supplied to the culture tank to maintain total ammonia nitrogen (TAN) concentration in the inflow water at around 8 mg/L. The hydraulic loading rate was set at 200 ㎥/$m^2$/day. TAN conversion was stabilized after about 90 day conditioning for all the selected filter media but with net accumulations of nitrite. On the volumetric basis, conversion rates of TAN and nitrite were the highest in styrofoam bead filter. Mean volumetric TAN conversion rates in the final samples were 682, 269, and 79 g TAN/㎥/day in the styrofoam bead, sand and loess bead filters, respectively. Low gravity and cost of styrofoam bead render the handling easier and more cost-effective.

• Journal of Korea Trade
• /
• v.26 no.6
• /
• pp.96-117
• /
• 2022

Purpose - Considering the recent instability of world economy and its heavy dependence on foreign, Korea must formulate breakthrough approaches to proactively cope with these adverse global developments. As such, this study aims to ascertain how participation in global value chains (GVCs) relates to corporate productivity and derive policy implications. Design/methodology - This study utilizes the microdata of Korean manufacturers to develop indicators of GVC participation at the enterprise level and analyzes the effects of GVC participation on the firm's total factor productivity by using fixed effect model. Findings - Enterprises with highest rates of export-side GVC participation see their productivity grow as their export-side GVC participation rates increase. In addition, when companies are classified by their export-side GVC participation rates, increasing export values improves all firm's productivity. In particular, those with low participation rates are analyzed to achieve higher productivity by increasing their imports, not only exports, which implies that companies with lower export-side GVC participation can boost productivity by reinforcing their export and import activities. Originality/value - This research paper distinguishes itself from others in that it makes a novel attempt to design the indicators of GVC participation at the enterprise level, not at the national or industry level. In addition, this study contributes to the existing literature by dividing companies into subgroups depending on their GVC participation rates for each of export and import and identifying variances in the effect of GVC participation on productivity growth among subgroups.

• Journal of Applied Reliability
• /
• v.11 no.3
• /
• pp.293-303
• /
• 2011

Reliability Prediction using MIL-HDBK-217F has some restrictions due to its one modeling basis. One of the restrictions is caused by selecting one operating environment of a system, which is chosen regardless of its detailed conditions, e.g., external impact and vibration. Especially, an equipment, which is installed on a mobile vehicle though its movement is quasi-static, is controversial to designate its environment as ground mobile($G_M$), rather than ground fixed($G_F$). In this paper, failure rates were compared, which are computed using several moving time rates to total operating time. RiAC-HDBK-217Plus was used as the basic calculation model. In addition, $G_F$ conditioned failure rate was evaluated by comparing with that under $G_M$ environment but fixed state.

• Journal of applied mathematics & informatics
• /
• v.4 no.2
• /
• pp.457-468
• /
• 1997

The present paper deals with an economic order quan-tity model for items deteriorating at some constant rate with demand changing at a known and at a random point of time in the fixed pro-duction cycle.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.169-176
• /
• 2014

This research discusses the characteristics and the implementation strategies for two types of quality metrics to analyze innovation effects in six sigma projects: fixed specification type and moving specification type. $Z_{st}$, $P_{pk}$ are quality metrics of fixed specification type that are influenced by predetermined specification. In contrast, the quality metrics of moving specification type such as Strictly Standardized Mean Difference(SSMD), Z-Score, F-Statistic and t-Statistic are independent from predetermined specification. $Z_{st}$ sigma level obtains defective rates of Parts Per Million(PPM) and Defects Per Million Opportunities(DPMO). However, the defective rates between different industrial sectors are incomparable due to their own technological inherence. In order to explore relative method to compare defective rates between different industrial sectors, the ratio of specification and natural tolerance called, $P_{pk}$, is used. The drawback of this $P_{pk}$ metric is that it is highly dependent on the specification. The metrics of F-Statistic and t-Statistic identify innovation effect by comparing before-and-after of accuracy and precision. These statistics are not affected by specification, but affected by type of statistical distribution models and sample size. Hence, statistical significance determined by above two statistics cannot give a same conclusion as practical significance. In conclusion, SSMD and Z-Score are the best quality metrics that are uninfluenced by fixed specification, theoretical distribution model and arbitrary sample size. Those metrics also identify the innovation effects for before-and-after of accuracy and precision. It is beneficial to use SSMD and Z-Score methods along with popular methods of $Z_{st}$ sigma level and $P_{pk}$ that are commonly employed in six sigma projects. The case studies from national six sigma contest from 2011 to 2012 are proposed and analyzed to provide the guidelines for the usage of quality metrics for quality practitioners.

• Journal of Veterinary Clinics
• /
• v.1 no.1
• /
• pp.25-31
• /
• 1984

The effects of progesterone releasing intravaginal device (PRID) on the fertility levels in dairy cows were studied in 2 experiments. In experiment I, 70 lactating cows at 45 days postpartum were allotted to 3 groups and the treatments imposed were either： 1: Untreated control, 2: PRID with a capsule containing long of oestradiol benzoate (ODB) attached, inserted for 12 days, 3: PRID inserted for 12 days with long of prostaglandin F$\_$2${\alpha}$/ administration 24 h before PRID removal. Treated cows were inseminated 56 h after PRID removal and at an observed oestrus during the subsequent 48-day period. The control group was inseminated at an observed oestrus during this 60-day period. In experiment II, 60 ovarian disorder cows were divided into 5 groups and PRID+ODB inserted for 12 days. 1: atrophied ovary, 2: smooth ovary, 3: persistent corpus luteum, 4: follicular cyst, 5: luteal cyst. Treated cows were inseminated 56 h after PRID removal and at an observed oestrus over a period from the first insemination to 46 days. The results obtained were as follows: 1. The device produced a vaginal discharge in some animals. In experimenet I : 2. For treatments 2 and 3, respectively, conception rates to the fixed time insemination were 45% and 52%. 3. The conception rates of cows inseminated to the fixed time insemination and at an observed oestrus during a 60-day period were 65%, 86% and 91% for control, treatment 2 and 3, respectively. 4. Mean interval from calving to conception and inseminations per conception were 133, 91 and 86 days and 2.4, 2.1 and 1.9 for control, treatments 2 and 3, respectively. In experiment II； 5. The conception rates to the fixed time insemination for each group 20, 50, 70, 20 and 50%, respectively. 6. The total conception rates for the 48 days period of each group were 60, 70, 100, 60 and 90%, respectively. 7. The inseminations per conception of each group were 2.8, 2.1, 1.4, 2.7 and 1.9, respectively.

• Speech Sciences
• /
• v.3
• /
• pp.177-186
• /
• 1998

This paper describes the procedure of implementing a real-time speech codec, G.723.1 which was developed by DSP Group and standardized by ITU-T, using fixed-point DSP, ADSP-2181. This codec has two bit rates associated with it, 5.3 and 6.3 kbit/s. We implemented only one bit rate, 6.3 kbit/s, of the two with fixed-point 32-bit precision. According to the result of the experiment, the amount of computational burden is about 55 MIPS and its quality is similar to the result of the PC simulation with floating-point arithmetic. In this paper, we proposed a method to use a fixed-point DSP and a procedure for developing a real-time speech codec using DSPs and finally developed a G.723.l speech codec for ADSP-2181.

• Speech Sciences
• /
• v.6
• /
• pp.219-233
• /
• 1999

This paper presents a real-time implementation of a speaker independent speech recognition system based on a discrete hidden markov model(DHMM). This system is developed for a car navigation system to design on-chip VLSI system of speech recognition which is used by fixed point Oak DSP core of DSP GROUP LTD. We analyze recognition procedure with C language to implement fixed point real-time algorithms. Based on the analyses, we improve the algorithms which are possible to operate in real-time, and can verify the recognition result at the same time as speech ends, by processing all recognition routines within a frame. A car noise is the colored noise concentrated heavily on the low frequency segment under 400 Hz. For the noise robust processing, the high pass filtering and the liftering on the distance measure of feature vectors are applied to the recognition system. Recognition experiments on the twelve isolated command words were performed. The recognition rates of the baseline recognizer were 98.68% in a stopping situation and 80.7% in a running situation. Using the noise processing methods, the recognition rates were enhanced to 89.04% in a running situation.