• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1855-1869
• /
• 1993

For the traditional ALOHA system without capture, the Markov chain obtained using the number of backlogged users at each slot if shown to be non-ergodic. So the infinite population ALOHA with fixed retransmission probabilities is unstable for any choice of the arrival rates and retransmission probabilities. The capture ALOHA system of also shown to be unstable for any arrival rate unless it has perfect. In this paper, we study a stabilization policy for capture ALOHA system that controls the retransmission probabilities and prove the stability of its multidimensional Markovian model by empolying a continuous Lyapunov function, and thus identify the stability region. We also study a delay performance through computer simulation th show the stability for any input rate below the maximum achievable channel throughput.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.2
• /
• pp.19-25
• /
• 2006

Methane hydrate, non-polluting new energy resource, satisfies requirement and considered as a precious resource that can prevent the global warming. Fortunately, there are abundant resources of methane hydrate distribute in the earth widely. Therefore, developing the techniques that can utilize these gases effectively is highly desired. The work in this paper here is to develop a skill which can transport and store methane hydrate. As a first step, the equilibrium experiment was carried out by increasing temperatures in the cell at fixed pressures. The influence of gas consumption rates under variable degree of subcooling, stirring and water injection has been investigated formation to clarify kinetic characteristics of the hydrate. The results of present investigation showed that the enhancements of the hydrate formation in terms of the gas/water ratio are closely related to operational pressure, temperature, degrees of subcooling, and water injection.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.5
• /
• pp.767-775
• /
• 2008

Methods used for exploring marine resources and spaces include positioning a probe under water and then recalling it after a specified time. Hydro-acoustic Releasers are commonly used for positioning and retrieving of such exploration equipment. The most important factor in this kind of system is the reliability for recalling the instruments. The frequently used ultrasonic signal detection method can detect ultrasonic signals using a fixed comparator, but because of increased rates of errors due to outside interferences, information is repetitively acquired. This study presents an effective ultrasonic signal detection algorithm using the characteristics of a resonance and adaptive comparator Combined with the FSK+ASK modulator. As a result, approximately 8.8% of ultrasonic wave communication errors caused by background noise and transmission losses were reduced for effectively detecting ultrasonic waves. Furthermore, the resonance circuit's quality factor was enhanced (Q = 120 to 160). As such, the bias voltage of the transistor (Vb= 3.3 to 6.8V) was increased thereby enhancing the frequency's selectivity.

• Journal of applied mathematics & informatics
• /
• v.8 no.2
• /
• pp.519-530
• /
• 2001

A two commodity continuous review inventory system with independent Poisson processes for the demands is considered in this paper. The maximum inventory level for the i-th commodity fixed as $S_i$(i = 1,2). The net inventory level at time t for the i-th commodity is denoted by $I_i(t),\;i\;=\;1,2$. If the total net inventory level $I(t)\;=\;I_1(t)+I_2(t)$ drops to a prefixed level s $[{\leq}\;\frac{({S_1}-2}{2}\;or\;\frac{({S_2}-2}{2}]$, an order will be placed for $(S_{i}-s)$ units of i-th commodity(i=1,2). The probability distribution for inventory level and mean reorders and shortage rates in the steady state are computed. Numerical illustrations of the results are also provided.

• IE interfaces
• /
• v.18 no.1
• /
• pp.82-87
• /
• 2005

Most of virtual reality systems ask users to control 3D objects or to navigate 3D world using 3D controllers. To maximize the human performance in the control, the design of virtual reality system and its input and output devices should be optimized. In this study, an experiment was designed to investigate the effects of three resolution factors of a virtual reality system on the human performance. Six subjects conducted the experiment for the factors; two frame rates, three spatial resolutions, and three pictorial contents. The result showed that the greater the spatial resolution was, the higher the human performance was. For the temporal resolution, fixed frame rate at 18 Hz was better than the varied maximized frame rate. For the pictorial contents, the virtual space with orientation cues marked the greatest performance than the other two conditions; the virtual space without any orientation cue and the virtual space like real world. These results could be applied for the design of virtual reality systems.

• 한국연소학회:학술대회논문집
• /
• 2001.11a
• /
• pp.17-26
• /
• 2001

Self flue gas recirculation flow is an effective method for low NOx emission in the regenerative low NOx burner. The object of this study is to analyze the self flue gas recirculating flow by varying jet velocity of the combustion air. Fuel and air flow rates are fixed and combustion air jet nozzle diameters are 13, 6.5 and 5mm. The stoichiometric line is obtained from the concentration of the fuel using an acetone PLIF technique. It is found that the self flue gas recirculating flow is entrained into that line using a two color PIV technique. As the jet velocity of combustion air is increased, the flue gas entrainment rate into the stoichiometric line is increased. This result suggests that NOx emission can be reduced due to the effects of flue gas which is lowering the flame temperatures.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.7
• /
• pp.549-556
• /
• 2001

Heat flow characteristics during hot water extraction process was studied experimentally. Data were taken at various outlet port type for the fixed inlet port type, inlet-outlet temperature differences and mass flow rates. In this study, the temperature distribution in a storage tank and an outlet temperature were measured to predict a flow pattern in the storage tank, and a hot water extraction efficiency was analysed with respect to the variables dominating a extraction process. Experimental results show that the extraction efficiency is high in a low flow rate in case of using modified distributor I(MDI) as a outlet port type.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.10
• /
• pp.1561-1570
• /
• 1989

In this paper, we propose an image coding scheme which combines the Laplacian pyramid structure and a hierarchical finite state classified vector quantizer in the DCT domain, namely FSDCT-CTQ. First, an optimal bit allocation problem for fixed rates DCT-CVQ on the Laplacian pyramid structure is described. In an asymptotic case, with an optimal bit allocation, a coding gain over scalar quantization of each Laplacian plane is derived. Second, it is experimentallhy shown that the Laplacian pyramid structure provides a considerable codng gain in the sense of total MMSE (minimum mean squared error). Finally, we propose an FS-DCT-CVQ which exploits the hierarchicla correlation between the Laplacian planes. Simulation results on real images show that the proposed coding scheme can reconstruct an image with 30.33 dB at 0.192 bpp, 32.45 dB at 0.385 bpp, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.24-33
• /
• 2012

This paper describes a multi-mode LDPC decoder which supports 19 block lengths and 6 code rates of Quasi-Cyclic LDPC code for Mobile WiMAX system. To achieve an efficient implementation of 114 operation modes, some design optimizations are considered including block-serial layered decoding scheme, a memory reduction technique based on the min-sum decoding algorithm and a novel method for generating the cyclic shift values of parity check matrix. From fixed-point simulations, decoding performance and optimal hardware parameters are analyzed. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a $0.18-{\mu}m$ CMOS cell library. It has 380,000 gates and 52,992 bits RAM, and the estimated throughput is about 164 ~ 222 Mbps at 56 MHz@1.8 V.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1E
• /
• pp.11-16
• /
• 2008

In this paper, a pitch cycle waveform (PCW) is extracted, quantized, and interpolated in a time domain to synthesize high-quality speech at low bit rates. The pre-alignment technique is proposed for the accurate and efficient PCW extraction, which predicts the current PCW position from the previous PCW position assuming that pitch periods evolve slowly. Since the pitch periods are different frame by frame, the original PCW is converted into the fixed-dimension PCW using the dimension-conversion method, and subsequently quantized by code-excited linear predictive (CELP) coding. The excitation signal for the linear predictive coding (LPC) synthesis filter is generated using the time-domain interpolation and interlink of the quantized PCW's. The coder operates at 4.2 kbit/s and 3.2 kbit/s depending on the pitch period. Informal listening test demonstrates the effectiveness of the proposed coding scheme.