• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.293-299
• /
• 2007

Intelligent pipeline inspection gauges (PIGs) are inspection vehicles that move along within a (gas or oil) pipeline and acquire signals (also called sensor data) from their surrounding rings of sensors. By analyzing the signals captured in intelligent PIGs, we can detect pipeline defects, such as holes and curvatures and other potential causes of gas explosions. There are two major data access patterns apparent when an analyzer accesses the pipeline signal data. The first is a sequential pattern where an analyst reads the sensor data one time only in a sequential fashion. The second is the repetitive pattern where an analyzer repeatedly reads the signal data within a fixed range; this is the dominant pattern in analyzing the signal data. The existing PIG software reads signal data directly from the server at every user#s request, requiring network transfer and disk access cost. It works well only for the sequential pattern, but not for the more dominant repetitive pattern. This problem becomes very serious in a client/server environment where several analysts analyze the signal data concurrently. To tackle this problem, we devise a fast in-memory cache manager, called T-Cache, by considering pipeline sensor data as multiple time-series data and by efficiently caching the time-series data at T-Cache. To the best of the authors# knowledge, this is the first research on caching pipeline signals on the client-side. We propose a new concept of the signal cache line as a caching unit, which is a set of time-series signal data for a fixed distance. We also provide the various data structures including smart cursors and algorithms used in T-Cache. Experimental results show that T-Cache performs much better for the repetitive pattern in terms of disk I/Os and the elapsed time. Even with the sequential pattern, T-Cache shows almost the same performance as a system that does not use any caching, indicating the caching overhead in T-Cache is negligible.

• Journal of the Korean Home Economics Association
• /
• v.37 no.7
• /
• pp.17-27
• /
• 1999

According to the design method for constructing the Korean Men's Jo-go-ri(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic pattern Jo-go-ri, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip(Dongjung) was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symmetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar(Kit) and the collar strip create a visual effect by equalizing the lengths of the two sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since there is no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial regulation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment, can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the basic pattern design is as follows: 1) The conic angle for the Jo-go-ri's girth, length end neck width is fixed at 70(72) degree. 2) The radius of the cone is sleeve length. 3) The bust girth calculation formula is B/4 + 2.5 cm. 4) The armhole formula is B/4 + 2.5cm. 5) The neck width formula is B/10. 6) The ratio of the collar junction{width of collar(Kit) + width of collar strip(Dongjung) to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius of sleeve length, that is an arc that exceeds the length of the Jo-go-ri's midsection.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1119-1126
• /
• 2018

Objective: Present investigation was aimed to study the Single Nucleotide Variants of the luteinizing hormone beta ($LH{\beta}$) gene and to analyze their association with the semen quality (fresh and post-thawed frozen semen) and luteinizing hormone (LH) concentrations in Murrah buffalo bulls. Methods: Polymerase chain reaction-single stranded conformational polymorphism (PCR-SSCP) and Sanger sequencing method is used to study genetic variability in $LH{\beta}$ gene. LH assay was carried out using enzyme-linked immunosorbent assay method. A fixed general linear model was used to analyze association of single nucleotide polymorphism (SNP) of $LH{\beta}$ gene with semen quality in 109 and LH concentrations in 80 Murrah bulls. Results: $LH{\beta}$ gene was found to be polymorphic. Total six SNPs were identified in $LH{\beta}$ gene g C356090A, g C356113T, g A356701G, g G355869A, g G356330C, and g G356606T. Single Stranded Conformational Polymorphism variants of pattern 2 of exon 1+pattern 2 of exon 2+pattern 1 of exon 3 had highly significant (p<0.01) effect on sperm concentration (million/mL), percent mass motility, acrosome integrity and membrane integrity in fresh and frozen semen whereas significant (p<0.05) effect was observed on percent live spermatozoa. SSCP variants of pattern 2 of exon 1+pattern 2 of exon 2+pattern 1 of exon 3 had highly significant (p<0.01) effect on luteinizing hormone concentrations too. Conclusion: The observed association between SSCP variants of $LH{\beta}$ gene with semen quality parameters and LH concentrations indicated the possibilities of using $LH{\beta}$ as a candidate gene for identification of markers for semen quality traits and LH concentrations in Murrah buffaloes.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.787-799
• /
• 2016

This study considers aesthetic characteristics by examining fashion style of fashion journalist Anna Wintour. Fashion journalists are specialists who work at fashion media. Especially, Anna Wintour is one of the most famous fashion journalist in the world and fashion icon, who has been editor-in chief of Vogue USA since 1988. For this study, Anna Witour's photograph was collected from 2010 to 2015 on web-sites. After collecting images, it analysed with 4criterions which were silhouette, color, fabric(pattern and texture) and hair style(and accessories) following advance researches analysis about fashion style. The conclusions of this study are as follows. First, symbolism revealed that could express her identity through utilizing steady items such as blond bob hair, Chanel bold sunglasses, short round neckless and Manolo Blahnik's low-heeled slingback nude sandals. Especially, she gave consistency to her fashion style with fixed hair style and accessories which are similar in shape. Second, femininity, that reveal as an internal characteristic such as sensitivity and as an external characteristic like fluidity. Anna Wintour expressed femininity with elegant curvy silhouette, various of color and flower pattern. Particularly, she emphasized nature women's body shape with princess silhouette, slim silhouette. Third, analysis result indicated characteristic of authority with oversize silhouette, wide lapel details and glamorous genuine fur items. Furthermore, some of her fur items looked overwhelming which dyed in artificial color or printed with leopard pattern. These powerful items contained immanent meanings that are power and position which could express a role as an editor-in chief of Vogue USA.

• Journal of KIISE
• /
• v.45 no.1
• /
• pp.86-93
• /
• 2018

When multiple clients share bandwidth and receive a streaming service, HTTP Adaptive Streaming has a problem in that the bandwidth is measured inaccurately due to the ON-OFF pattern of the segment request. To solve the problem caused by the ON-OFF pattern, the proposed PANDA (Probe AND Adapt) determines the quality of the segment to be requested while increasing the target bandwidth. However, since the target bandwidth is increased by a fixed amount, there is a problem in low bandwidth utilization and a slow response to changes in bandwidth. In this paper, we propose a video quality control scheme that improves the low bandwidth utilization and slow responsiveness of PANDA. The proposed scheme adjusts the amount of increase in the target bandwidth according to the bandwidth utilization after judging the bandwidth utilization by comparing the segment download time and the request interval. Experimental results show that the proposed scheme can fully utilize the bandwidth and can quickly respond to changes in bandwidth.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.51-57
• /
• 2001

A light beam reflected from a machined surface generally containes information concerning about its surface roughness. This study examines and proposes a surface roughness measurement technique for on-machine measurement of machined surfaces. The technique is based on the measurement of a reflected laser beam pattern and the statistical analysis of its light intensity distribution. The surface roughness was found to be closely related to the standard deviation of the light intensity on the primary axis of the reflected pattern. An image acquisition device is made up of a laser diode, a half mirror, a screen, and a CCD camera. The exact image with the primary and secondary axes of a reflected laser beam pattern is calculated through such image processing algorithm as thresholding, edge detection, image rotation, segmentation, etc. A median filter and a surrounding light correction algorithm are improve the image quality and reduce the measuring error. Using the developed measuring device the effect of screen materials and workpiece and workpiece materials was investigated. Experimental results regarding to relatively high-quality surfaces machined by grinding, polishing, lapping processes have shown the measurement error is within 10% in the range of $0.1{mu}m~0.8{\mu}m R_q.$Therefore, the proposed method is thought to be effectively used when quick measurements is needed with workpieces fixed on the machine.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.2
• /
• pp.416-420
• /
• 1998

Flow-volume loop is known to be useful in the diagnosis of upper airway obstruction. In cases of tracheal obstruction, characteristic features such as fixed or variable upper airway obstruction patterns give clue to the diagnosis. But the flow-volume loop of unilateral mainstem bronchial stenosis is not known well. There is controversy in patterns of flow-volume loop in unilateral mainstem bronchial stenosis (restrictive pattern or biphasic pattern). We report a case of biphasic flow-volume loop in left mainstem bronchial stenosis(4-5 mm in diameter) as a sequela of endobronchial tuberculosis, which recovered normal flow-volume loop after metallic stent insertion and 2 months later showed reappearance of biphasic pattern because of restenosis of left mainstem bronchus due to growth of granulation tissue at the stent site.

• Archives of Craniofacial Surgery
• /
• v.24 no.6
• /
• pp.266-272
• /
• 2023

Background: In recent years, there has been an increase in reports of perioral vascular complications resulting from filler injections, such as necrosis of the lip or alar rim, occlusion, and in severe cases, blindness. Conversely, the use of perioral arterial flaps is becoming more prevalent in the treatment of cleft lips, cancer, and trauma. A thorough understanding of perioral arteries is essential to minimize complications and maximize the success of these flaps. However, the course of the facial artery (FA) in the perioral region remains incompletely understood. The aim of this study was to describe the variations of the FA in the perioral region. Methods: We dissected 52 embalmed and formaldehyde-fixed Vietnamese cadavers. We then studied the size and distribution of perioral arteries in 102 specimens. Results: The superior labial artery (SLA) was the most common branch, occurring in 87.25% of cadavers, followed by the inferior labial artery (ILA) at 78.43%. The SLA primarily originated above the mouth corner (cheilion), accounting for 91.01% of cases, and predominantly exhibited a tortuous course within the submucosa (78.65%). The ILA's branching pattern varied, but it was primarily located below the cheilion (91.25%). The ILA also followed a twisted path, generally within the submucosa. The ILA exhibited two patterns: the typical pattern, distributed at the vermilion border of the lower lip (8.82%), and the horizontal labiomental artery pattern, which ran horizontally in the middle of the lower lip area (69.61%). At their origin, the SLA and ILA had average external diameters of 1.29 mm and 1.28 mm, respectively. Conclusion: Numerous anatomical variations in the FA in the perioral region were found. A detailed anatomic description, suggested landmarks, and angiography before the procedure will be useful to help doctors avoid complications.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.217-229
• /
• 2000

Adsorption equilibrium experiments for the phenol on granular activated carbon(16~25 mesh) and powder activated carbon(325 mesh) were carried out at $25{\pm}1^{\circ}C$ and the results were expressed with Freundlich isotherm. Adsorption rate experiments were executed in batch adsorption system under the condition that can be neglecting mass transfer resistance at the external surface of the particle. The results were analysed with the Miller's method to evaluate the linear driving force(LDF) adsorption rate constant. Fixed bed adsorption experiments were performed by adopting different flow rates in the activated carbon-phenol system at $25{\pm}1^{\circ}C$. The theoretical breakthrough curves were estimated with the simple constant pattern solution. The adsorption rate constant of LDF model was not a fixed value but variable with adsorption amount. The experimental results were better agreed with the estimation of breakthrough curve using the variable adsorption rate constant than the results estimated using the average fixed adsorption rate constant.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.244-251
• /
• 2017

PURPOSE. The purpose of this study was to determine fracture resistance and failure modes of three-unit fixed dental prostheses (FDPs) made of lithium disilicate pressed on zirconia (LZ), monolithic lithium disilicate (ML), and monolithic zirconia (MZ). MATERIALS AND METHODS. Co-Cr alloy three-unit metal FDPs model with maxillary first premolar and first molar abutments was fabricated. Three different FDPs groups, LZ, ML, and MZ, were prepared (n = 5 per group). The three-unit FDPs designs were identical for all specimens and cemented with resin cement on the prepared metal model. The region of pontic in FDPs was given 50,000 times of cyclic preloading at 2 Hz via dental chewing simulator and received a static load until fracture with universal testing machine fixed at $10^{\circ}$. The fracture resistance and mode of failure were recorded. Statistical analyses were performed using the Kruskal-Wallis test and Mann-Whitney U test with Bonferroni's correction (${\alpha}=0.05/3=0.017$). RESULTS. A significant difference in fracture resistance was found between LZ ($4943.87{\pm}1243.70N$) and ML ($2872.61{\pm}658.78N$) groups, as well as between ML and MZ ($4948.02{\pm}974.51N$) groups (P<.05), but no significant difference was found between LZ and MZ groups (P>.05). With regard to fracture pattern, there were three cases of veneer chipping and two interfacial fractures in LZ group, and complete fracture was observed in all the specimens of ML and MZ groups. CONCLUSION. Compared to monolithic lithium disilicate FDPs, monolithic zirconia FDPs and lithium disilicate glass ceramics pressed on zirconia-based FDPs showed superior fracture resistance while they manifested comparable fracture resistances.