• Journal of the Korea Society of Computer and Information
• /
• v.16 no.5
• /
• pp.13-22
• /
• 2011

Network Intrusion Detection Systems use regular expression to represent malicious packets and hardware-based pattern matching is required for fast deep packet inspection. Although hardware architectures for implementing constraint repetition operators such as {10} were recently proposed, they have some limitation. In this paper, we propose hardware architecture supporting constraint repetitions of general regular expression sub-patterns with lower logic complexity. The subpatterns supported by the proposed contraint repetition architecture include general regular expression patterns as well as a single character and fixed length patterns. With the proposed building block, we can implement more efficiently regular expression pattern matching hardwares.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.87-99
• /
• 1993

Many studies have been reported on the successful replacement of missing teeth with osseointegrated dental Implants. However, little research has been carried out on the bio-mechanical aspect of the stress on the surrounding bone of the free-standing type of dental implant prostheses. This experimental study was aimed to analyze the stress distribution pattern on the supporting tissues depending upon the position of osseointegrated implants supporting fixed bridges. In the cases of unilateral partially edentulous mandible (the 2nd premolar and the 1st and 2nd molars missing), two osseointegrated implants were placed at the 2nd premolar and 2nd molar sites (Model A) , the 1st and 2nd molar sites (Model B, Anterior cantilevered type), the 2nd premolar and 1st molar sites (Model C, Posterior cantilevered type). Chewing forces of dentate patients and denture wearer were applied vertically on the 2nd premolar, the 1st molar, and the 2nd molar of each model. A 3-Unit fixed partial denture was constructed at each model and cantilevered extension parts were involved in Model B and Model C. Two dimensional finite element analysis was undertaken. The commercial software (Super SAP) for IBM 16 bit personal computer was utilized. The results were as follows : 1. The magnitude of applied load influenced on the total value of stresses, but did not in-fluence on the pattern of stress distribution. 2. The magnitude of stress developed from the supporting tissues were in order of Model C,Model A,Model B. 3. High stresses were concentrated on the cervical and apical portion of the implant/bone interface. 4. A difference of the stress magnitude on the implant/bone interface between mesial and distal implant was most prominant in Model C and in order of Model A and Model B. 5. The stresses developed in Model A were evenly distributed throughout both implants. 6. The stresses concentrated on the cervical portion of cantilevered side were higher in the posterior cantilevered type than in the anterior cantilevered type.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.2
• /
• pp.107-115
• /
• 2011

Purpose: To design and fabricate the distributed auto edging machine for the development. Methods: We got the necessary data needed in design by using CAD. Based on the these data, we fabricated the trial product for the development of the distributed auto edging machine. Results: The patternless mode could be operated by receiving the eyesize data from the auto lay-outer with the RS232C transmission system and the pattern mode could be operated by setting the pattern on the left side of the machine. The distributed auto edging machine were composed with combinations of many elements; head, auto arm, pattern clamp and grinding wheels. The head part controlled the grinding of ophthalmic lens by operating the vertical and horizontal motors. The wheels part was comprised of glass mode, plastic mode, V-bevel mode and polish mode. The slide in the auto arm was equipped on the below of the patten and the slide could hold up the pattern which was rotated by fixed shaft. The pattern clamp could move the head part to the up and down or right or left way by the manual operation of optometrists. Conclusions: We could succeed in making the trial product by applying it to the development of the distributed auto edging machine which could be used as the patternless mode and pattern mode, selectively. Therefore, it was confidently expected that this product was very helpful for the optometrists to dispense the ophthalmic lens because of its cost-efficiency and convenience.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.38-63
• /
• 2017

This study sets out to investigate the installation of royal kilns and its impact on local kilns, taking note of celadon vase with inlaid cloud pattern in Joseon Dynasty. For that purpose, it determined the kilns and period to produce celadon vases with inlaid cloud pattern, and compared them with the pattern, design, and deformity of the celadon vases produced in the royal kilns in the 15th centuries. The celadon vase with inlaid cloud pattern was superior in quality than the porcelain for tribute ware manufactured together in Jeolla Province before the installation of royal kilns. And then a majority of sagijangs at local kiln had difficult time securing enough supply of manpower and resources, and discontinued manufacturing the celadon vase with inlaid cloud pattern. En revanche, celadon vases with inlaid cloud pattern produced from specially fixed royal kilns reflected the local sagijang's skill. Local kilns were strongly influenced by the installation of royal kilns. Those could not freely use high-quality white clay, limited to the market. Besides, most of the skillful sagijangs were assigned to royal kilns. Celadon vases with inlaid cloud pattern can be used as evidence to show that the manufacturing technique was transferred from local kilns to the royal kilns as well as to show that their production in royal kilns soon became stabilized.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.567-575
• /
• 2001

This paper suggests new method to get fixed size parameter from different length of voice signals. The efficiency of speech recognizer is determined by how to compare the similarity(distance of each pattern) of the parameter from voice signal. But the variation of voice signal and the difference of speech speed make it difficult to extract the fixed size parameter from the voice signal. The method suggested in this paper is to normalize the parameter at fixed size by using the 2 dimension DCT(Discrete Cosine Transform) after representing the parameter by spectrogram. To prove validity of the suggested method, parameter extracted from 32 auditory filter-bank(it estimates auditory nerve firing probabilities) is used for the input of neural network after being processed by 2 dimension DCT. And to compare with conventional methods, we used one of conventional methods which solve time alignment problem. The result shows more efficient performance and faster recognition speed in the speaker dependent and independent isolated word recognition than conventional method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.2
• /
• pp.125-145
• /
• 2001

To compare the stress distribution patterns between cement-retained and screw-retained implant supported fixed prostheses according to four different abutment types, a three dimensional finite element analysis was performed. The hypothetical three unit fixed partial denture case was modelled on the three implants(10mm length and 3.75 diameter) in mandibular bone. Four angles of implantation(vertical, 10, 15 and 20 degree inclined mesially) were created and three different directions of force (vertical, oblique, horizontal) were applied at the center of the second premolar and distal end of the first molar for each cases. Within the limits of this study, the results were as follows, 1. In vertically installed cases, the more stress was concentrated at upper components, but mesially inclined cases, the more stress was concentrated at cortical bone. 2, The more inclined mesially the more stress was observed, especially at cortical bone. 3. The cement-retained models showed lower principal stress and more even stress distribution than the screw-retained models. 4. The similar stress distribution pattern was showed in model 1 and model 2, model 3 and model 4. 5. The more stress was observed when the loads were applied at the distal end of 1st molar than the center of 2nd premolar. 6 The fixture and the model as a whole, lesser stress values were observed when vertical loads were applied as compared to horizontal and oblique loads.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.412-424
• /
• 2004

Statement of problem: Several prosthetic options are available for the restoration of multiple adjacent implants. A passively fitting prosthesis has been considered a prerequisite for the success and maintenance of osseointegration. Passivity is a particular concern with multiple implants because of documented inaccuracies in the casting and soldering process. One way to avoid this problem is to restore the implants individually, however, the restorations of individual adjacent impants requires careful adjustment of interproximal contacts. Purpose: The purpose of this study was to compare the stress distribution pattern and amount surrounding Bicon implants with individual crowns and splinted restorations. Material and method: A photoelastic model of a human partially edentulous left mandible with 3 Bicon implants($4{\times}11mm$) was fabricated. For non-splinted restorations, individual crowns were fabricated on 3 abutments ($4{\times}0.65mm,\;0^{\circ}$, 2.0 mm post, Bicon Inc., Boston, USA) After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal ($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m)$), and heavy($80{\mu}m$). Splinted 3-unit fixed partial dentures were fabricated and cemented to the model. Changes in stress distribution under simulated non-loaded and loaded conditions(7.5, 15, 30 lb) were analyzed with a circular polaricope. Results: 1. Stresses were distributed around the entire body of fin in Bicon implants. 2. Splinted restorations were useful for distribution of stress around implants especially with higher loads. 3. By increasing the contact tightness between the individually restored three implants, the stress increased in the coronal portion of implants. Conclusions: Ideal adjustment of the contact tightness was important to reduce the stresses around individually restored Bicon implants.

• Journal of the Korean Society of Costume
• /
• v.53 no.1
• /
• pp.49-66
• /
• 2003

In the relationship between post-modern feminism and the body. the body of women, which has been taken as 'other' by dominant arguments, has escaped from the fixed idea at post-modern times and the post-modern feminists tried to escape from the taste of the times about body image that was prevalent in the former times.'The taste of the times' here means the fixed physical form of ideal women's body by the educational custom, and it includes the educational prescription which establishes the docile body of women. This kind of educational custom aims at the perfect and permanent restriction on size, shape, desire, attitude and movement as well as on the overall demeanor and each part of the body. And the custom produces 'dependent and trained'. that is, inferiorized women's body. Hence, this paper points out that the feminity as a fixed Physical form should be overcome in order to move forward, and as one part of the effort, it attempts to analyze the designs which deformed and distorted women's body in 1990s. This research indicates that the work, which tries to deviate the fantasized and casted women's mystery, has been closely connected with the expression of 'non-separate bodies' and 'irregular body shapes' in 1990s, which aims at escaping from the fixation of women's body Image. Therefore, it is concluded that the target design trend of this research, which expressed the deformation and perversion of the body, provides the anti-these against the ideal body image of women and the these of feminity. which have been reproduced in various methods and patterns throughout the public and the culture on the whole by expressing the refusal and deviation of the existing women's body image through the post-fixation of the body pattern.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.692-698
• /
• 1999

In this paper, we proposed the channel assignment scheme for the CDMA(Code Division Multiple Access) cellular system using power allocation concept. Also, the performance of the proposed scheme was analyzed and it was compared with the channel assignment scheme using the fixed power allocation method in the CDMA cellular system. The proposed scheme allocates the power adaptively in according to the traffic loads and the traffic distribution pattern of neighbor cells in the forward link. We found that total call blocking probability (Pr) is more dependent on blocking probability($P_B$) than outage probability (Po) under physical number of channels ($C_{th}$)=30. Pr(Call Blocking Probability) is dependent on $P_B$(Blocking Probability) and Po(Outage Probability) at the same ratio under $C_{th}$=32, in which case P$P_{TA}$(blocking probability for the adaptive power allocation) is greater than $P_{TF}$(blocking probability for the fixed power allocation) about 6%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.955-961
• /
• 2017

In this paper, we propose a parallel approximate string matching algorithm with k-mismatches for multiple fixed-length patterns (PMASM) in DNA sequences. PMASM is developed from parallel single pattern approximate string matching algorithms to effectively calculate the Hamming distances for multiple patterns with a fixed-length. In the preprocessing phase of PMASM, all target patterns are binary encoded and stored into a look-up memory. With each input character from the input string, the Hamming distances between a substring and all patterns can be updated at the same time based on the binary encoding information in the look-up memory. Moreover, PMASM adopts graphics processing units (GPUs) to process the data computations in parallel. This paper presents three kinds of PMASM implementation methods in GPUs: thread PMASM, block-thread PMASM, and shared-mem PMASM methods. The shared-mem PMASM method gives an example to effectively make use of the GPU parallel capacity. Moreover, it also exploits special features of the CUDA (Compute Unified Device Architecture) memory structure to optimize the performance. In the experiments with DNA sequences, the proposed PMASM on GPU is 385, 77, and 64 times faster than the traditional naive algorithm, the shift-add algorithm and the single thread PMASM implementation on CPU. With the same NVIDIA GPU model, the performance of the proposed approach is enhanced up to 44% and 21%, compared with the naive, and the shift-add algorithms.