• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.552-557
• /
• 2006

Since the 20th century, the business of railway was invaded by the invention of airplanes and vehicles in the field of the transportation of passenger and commercial products, however, in the 21st century, the fervent development of a high-speed railway made possible the huge capacity of transporting passengers and commercial freight, so the railway industry is facing a new era of railway revolution. The 200 years old railway tradition includes the history of railway bridges built in areas of river, valley and metropolitan region and in that, the number of constructions of railway bridges that is composed of cable-stayed bridges is increasing as one of the most optimal bridges considering the quality of materials and the span of continuous-welded long rail. Thanks to the minimized effects of the fixed load on the stiffening girder section by delivering the fixed load which is applied to the pylon with the composition of elastic supporting-points by using cables and the effective structural system that can throughly resist extra loads in addition to fixed load, the long-extended span of a bridge becomes possible. In this structural system, the load that is applied to the stiffening girder section forms a flow pattern and in the process of these load delivery, there will be a necessity to examine the concentration of stress occurred in the cable-anchor system of the cable.

• Animal cells and systems
• /
• 제3권2호
• /
• pp.215-219
• /
• 1999

Monoclonal antibody for delta-9-tetrahydrocannabiol (THC Ab), conjugated with protein A-gold, was employed as a probe to detect THC localization in the gland and subjacent cells of chemically fixed bracts of Cannabis. THC was detected in the outer wall of the disc cells, fibrillar matrix, the surface feature of secretory vesicles, and sheath throughout development of the secretory cavity. The probe was absent from vesicles. Label was also present in anticlinal walls of disc cells and walls of dermal and mesophyll cells. Little or no THC Ab was present in disc cells and none were detected in control tissues. This distribution pattern of THC Ab was similar to that in tissues prepared by high pressure cryofixation-cryosubstitution. Consistent association of THC with wall and wall-derived materials suggests that cannnabinoids are synthesized outside the plasma membrane and bound to a wall component, where-upon they are transported to the cavity with wall materials released from the disc cell wall during development of the secretory cavity.

• 대한치과보철학회지
• /
• 제34권1호
• /
• pp.85-99
• /
• 1996

Finite element models were constructed to analyze the mechanical behavior of a three unit fixed partial denture (FPD) with a 2nd premolar and 2nd molar abutment either employing a rigid and nonrigid connector. Gap elements were used to model the clearance space of the nonrigid connector. 1. High stress was generated in the FPD and supporting abutment around the rigid connector. 2. The pattern of stress and deflection is very similar between vertically and 20 degree mesially tilted nonrigid connector at the distal aspect of premolar abutment. 3. FPD with an inverted nonrigid connectors exhibited the worst undesirable mechanical stress states and deformations. 4. Nonrigid connector of normal orientation transmit the load to the abutment tooth, but inverted connector doesn't transmit the force.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2004년도 춘계 학술대회 발표논문집
• /
• pp.161-163
• /
• 2004

This study concerns the constraints of English Poetic Fixed Meter. In English poems, the metrical pattern doesn't always match the linguistic stress on the lines. These mismatches are found differently among the poets. For the lexical stress mismatched with the weak metrical position, ${\ast}W{\Rightarrow}$ Strength is established by the concept of the strong syllable. The peaked monosyllabic word mismatched with weak metrical position is divided according to which side of the boundary of a phonological domain it is adjacent to. In most poets, ${\ast}$Peak] is ranked higher than ${\ast}$[Peak. In Shakespeare, Adjacency Constraint is ranked higher than ${\ast}$Peak].

• 유통과학연구
• /
• 제11권5호
• /
• pp.33-41
• /
• 2013

Purpose - Yard inventories increase when export containers are carried into the terminal and decrease when import containers are delivered to the consigners. The purpose of this study is to analyze container inventories according to the weekly ship arrival pattern at container terminals. Research design, data, and methodology - As container ships operate according to weekly schedules based on shipping companies and their routes, specific terminals provide a fixed-day service in a week. Thus, yard inventories can change with weekly fluctuations. The data used in this study were the actualdata at specific container terminals. Result - The dwell times of each container at a terminal represent an important variable that affectsyard inventories. Even cargo flows are steady in a given period, if dwell times are prolonged, yard inventories increase. Conclusion - Dwell time is another factor causing yard inventory change. Therefore, the calculation for yard inventories should consider the weekly ship arrival patterns and dwell times of each container. Further, at the planning stage, dwell time should be more carefully considered to calculate yard capacity.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1176-1179
• /
• 2002

This paper presents the use of a Genetic Algorithm to find the optimal layout for the placement of garment patterns on a fabric of fixed width to minimize fabric waste. We developed a program to simulate garment pieces and their layout on a fixed-width fabric. Each piece in the order book is placed with 2 possible orientations: 0 degrees and 180 degrees. The efficiency is measured by the length of fabric used after all the patterns in the order book have been laid out. A comparison is made between the placement using our proposed genetic algorithm to that made by an expert human using our simulation program. The results from our experiments on various pattern designs indicate that our genetic algorithm can effectively be used to obtain highly efficient solutions, comparable to that done by an expert while using a reasonable amount of time. The algorithm can also be adapted for use in other areas related to optimal consumption of sheet material such as metal, paper, and leather.

• 전자공학회논문지C
• /
• 제34C권10호
• /
• pp.59-66
• /
• 1997

Neural networks has widely been be used for several practical applications such as speech, image processing, and pattern recognition. Thus, a approach to the voltage-controlled current source in areas of neural networks, the key features of CNN in locally connected only to its netighbors. Because the architecture of the interconnection elements between cells in very simple and space invariant, CNNs are suitable for VLSI implementation. In this paper, processing element of digital programmable CNN with variable template memory was implemented using CMOS circuit. CNN PE circuit was designe dto control gain for obtaining the optimal solutions in the CNN output. Performance of operation for 4*4 CNN circuit applied for fixed template and variable template analyzed with the result of simulation using HSPICE tool. As a result of simulations, the proposed variable template method verified to improve performance of operation in comparison with the fixed template method.

• KSTLE International Journal
• /
• 제9권1_2호
• /
• pp.26-30
• /
• 2008

This study examined the surface modification characteristics of NBR using sealing in automobile. Surfaces of NBR were modified by RF power Ar plasma treatment. In experiment, pressure, flux, temperature were fixed and RF bias voltage. Treatment time was changed. In friction test, we used PTFE grease. After modification, surfaces of NBR showed many grooves, hydrophilic functional groups, and lipophilic functional groups. As increasing treating voltage and time, the amount of them was increased. And wetting angle and friction coefficient was decreased with increasing treating voltage and time. However, the pattern of changing friction coefficient was not fixed.

• 한국전기전자재료학회논문지
• /
• 제23권2호
• /
• pp.89-92
• /
• 2010

A bolometer sensor used in an infrared thermal imaging system has many advantages on the process because it does not need a separate cooling system and its manufacturing is easy. However the sensitivity of the bolometer is low and the fixed pattern noise(FPN) is large, because the bolometer sensor is made by micro electro mechanical systems (MEMS). These problems can be fixed-by using the high performance readout integrated circuit(ROIC) with noise reduction techniques. In this paper, we propose differential delta sampling circuit to remove the mismatch noise of ROIC itself, the FPN of the bolometer. And for reduction of FPN noise, the reference signal compensation circuit which compensate the reference signal by using on-resistance of MOS transistor was proposed.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권2호
• /
• pp.135-146
• /
• 2022

In GNSS, the structure of the navigation message has been improved to increase the flexibility of data addition and transmission, and the robustness of message reception in a low SNR environment. GNSS signals currently being broadcast have a different message structure from each other, and the structure can be largely classified into the fixed structure, the packetized structure, and the packetized and fixed pattern structure. This paper analyzes the features of these three types of structures and compares the performance using the indicators. It can be seen that the performance after adopting the packetized structure is superior to those of other structures. In particular, there has been remarkable improvement in terms of the message management and transmission efficiency.