References
- J.A. Brydson, Rubbery materials and their compounds, Elsevier Applied Science, 1988
- Andrew Ciesielski, (An) Introduction to Rubber Technology, Rapra Technology Limited, Shropshire(UK), 2000
- Moore DF., The friction and lubrication of elastormers, Pergamon Press, 1972
- Persson BNJ, on the theory of rubber friction, Surf. Sci., Vol. 401, p445-454, 1998 https://doi.org/10.1016/S0039-6028(98)00051-X
- Persson BNJ, Albohr O, Tartaglino U, Volokitin Al. Tosatti E, On the nature of surface roughness with application to contact mechanics, sealing rubber friction and adhesion, T Phys Condens Matter, Vol. 7, No. 1, p1-62, 2005
- Greenwood JA, Tabor D., The friction of hard sliders on lubricated rubber: the importance of deformation losses, Proc Phys Soc, Vol.71, p989-p1001, 1958 https://doi.org/10.1088/0370-1328/71/6/312
- Hofmann W, Rubber technology handbook, Munich: Hanser, 2001
- Torbacke M, Johnsson A, Seal material and base fluid compatibility: an overview, J Synth Lubr, Vol. 22, No. 2, p123-42, 2005 https://doi.org/10.1002/jsl.2005.22.2.123
- Papiya Sen Majumder, Anil K. Bhowmick, Friction behavior of eletron beam modified ethylene-propylene diene monomer rubber surface, Wear, Vol. 221, p15-p23, 1998 https://doi.org/10.1016/S0043-1648(98)00255-5
- Kyung Kyoon Kim, Jeong Suk Kim, Myeong Chang Kang, Studies on Improvement in the Coefficient of Friction on Oil Seal rubber by Ino Implantation, KSMTE Autm. proc.,p166-p171, 2007
- Alfred Grill, Cold Plasma in Materials Fabrication-From Fundamentals to Application, John Wiley & Sons, p181-p189, 1994
- Hoffman, A. S., In Plasma Polymerization and Plasma Interactions with Polymeric Materials, ed. H. K. Yasuda, p341. New York: John Wiley & Sons, 1990
- Hoffman, A. S., In Plasma Polymerization and Plasma Interactions with Polymeric Materials, ed. H. K. Yasuda, p339. New York: John Wiley & Sons, 1990
- Hoffman, A. S., In Plasma Polymerization and Plasma Interactions with Polymeric Materials, ed. H. K. Yasuda, p153. New York: John Wiley & Sons, 1990
- M. Sugawara, Plasma Etching-Fundamentals and Application, Oxford Science Publication, 1998
- E. F. Abdrashitov and A. N. Ponomarev, Plasma Modification of Elastomers, High Energy Chemistry, Vol. 37, No. 5, p279-p285, 2003 https://doi.org/10.1023/A:1025760027534
- L. Martinez, L. Alvarez, Y. Huttel, J. Mendez, E. Roman, A. Vanhulsel, B. Verheyde, R. Jacobs, Surface analysis of NBR and HNBR elastomers modifaied with different plasma treatments, VACUUM, Vol. 81, p1489-p1492, 2007 https://doi.org/10.1016/j.vacuum.2007.04.025
- Tikhomirov, L.A., Khim. Vys. Energ., Vol. 24, No. 2, p171, 1990
- Chichagova, Zh.S. and Tikhomirov, L.A., Khim. Vys. Energ., Vol. 25, No. 2, p176, 1991
- Krylova, S.N., Ural'skii, M.L, and Gorelik, R.A, Trenie Iznos, Vol. 7, No. 3, p542, 1986
- Ratway, R.J and Balik, C.M., J. polym. Sci., Part B, Vol. 35, No. 11, p1651, 1997 https://doi.org/10.1002/(SICI)1099-0488(199708)35:11<1651::AID-POLB1>3.0.CO;2-W
- Cho, D.L. and Yasuda, H., J. Appl. Polym. Sci. Symp., Vol. 23, No. 1, p64, 1988