• Proceedings of the Safety Management and Science Conference
• /
• 2005.11a
• /
• pp.505-510
• /
• 2005

The manufacturing industries which played a major role in the rapid economic growth and industrialization of Korea in the late 20th century had considerable difficulties changing their manufacturing conditions from producer-oriented conditions to customer-oriented ones according to market changes. In this study, increase plant efficiency because grafts together modular system to plant layout and analyzes Work In Process(WIP) between product's cycle time and each process, family efficient plan wishes to choose opposite bank. Simulation approach used for presented methodology The effect will not gain the results for other reasons the inherent conditions of companies, people, and culture which have been hitherto described, but will be expected to help the direction for a new Lay-out production system to reflect on the native conditions rather than fixed technological means and methods in way of an analysis of fundamental problems which small and medium companies in Korea face.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.1
• /
• pp.55-64
• /
• 1996

The size of leisure space has been determined on the basis of the annual and peak day's number of visitor, turnover rate, and size per visitor. But the past models have no theoretical base and practical errors on the many cases. So, this study was carried out to build and test a new theoretical model for selecting a optimal size of theme park. The basic concept of the model building is the break-even point analysis of cost-volume-profit relation. That is, Gain-Loss of theme park is determined by marginal profit and fixed cost by size. YongIn Farmland was selected as a model test case.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1708-1712
• /
• 2008

This paper describes a linear matrix inequality (LMI) approach to the design of robust low-order power system stabilizers (PSSs), which are used to damp out local-mode oscillations of synchronous generators. The performance of a PSS is expressed as the location of the closed-loop poles, and a single fixed-gain pole-placement controller is synthesized for a wide range of operating conditions. The synthesis results in simultaneous regional pole-placement stabilization. and is formulated as an LMI feasibility problem with a rank condition. A penalty method is applied to solve the rank-constrained LMI problem. Numerical experiments with a single-machine connected to an infinite bus system were performed to demonstrate the proposed method.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.1-5
• /
• 2000

The conventional PID controller has been extensively used to speed control of marine diesel engines. However one of drawbacks is that its control performance can be degraded if the parameters are fixed on whole operating points. In this paper a scheme for integrating PID control and the fuzzy technique is presented to control speed of a marine diesel engine on whole operating points. At first the PID controller is designed at each speed mode whose parameters are optimally adjusted using a genetic algorithm, Then fuzzy "if-then" rules combine the controllers as a consequence part. To demonstrate the effectiveness of the proposed fuzzy controller a set of simulation works on a marine diesel engine are carried out.rried out.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.854-858
• /
• 1987

This paper considers impulsive noise which produce burst error in high speed(approx.160Kbps) data transmission like ISDN(Integrated Servise Digital Network) using PSTN(Public Switching Telephone Network). To begin with, we obtains the transfer function of subscriber line to calculate the variation of bandwidth when the gain of receiver is fixed and channel capacity of non-gaussian channel in upper-and lower bound, and evaluates the transmission capability. In this paper compares channel capacity bounds which obtains when probability density function of impulsive noise is Laplacian distribution function with impulsive noise generated by waveform synthesier.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.449-454
• /
• 1994

This paper describes new PID control methods based on the fuzzy logic. PID gains are retuned after evaluating control performances of transient responses in terms of performance features. The retuning procedure is based on fuzzy rules and reasoning accumulated from the knowledge of experts on PID gain scheduling. For the case that the retuned PID gains result in worse CLDR (characteristics of load disturbance rejection) than the initial gains, an on-line tuning scheme of the set-point weighting parameter is, proposed. This is based on the fact that the set-point weighting method efficiently reduce either overshoot or undershoot without any degradation of CLDR. The set-point weighting parameter is adjusted at each sampling instant by the fuzzy rules and reasoning. As a result, better control performances were achived in comparison with die controllers tuned by the Z-N (Ziegler-Nichols) parameter tuning formula or by the fixed set-point weighting parameter.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.127-134
• /
• 2005

This paper proposes a nonlinear fuzzy PID controller with variable parameters to improve slow rising time and divergence occurred by limited input spaces and a resultant limited control input during fuzzification in a fuzzy PID controller with fixed parameters, and describes the design principle and tracking performance of a proposed fuzzy PID controller. The parameters of a proposed controller are adjusted by the stability conditions derived from 'small gain theorem' and satisfy the BIBO stability of overall control system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1096-1108
• /
• 1996

In this paper, we propose a temporal adaptive tranform 3D SBC coder with motion compensation, exploiting redundancy in the temporal domain. We propose a temporal adaptivity measure, by which the R-D optimal temporal transform can be chaosen. The base temporal subband frame is coded using H.261-like MC-DCT coder, while the higher temporal subband frames are coded using the 2D adaptive wavelet packet bases, considering the various energy distribution which results from the temporal variation. In encoding the subbands, we employ adaptive scanning methods, uniform step-size quantization with VLC, and coded/not-coded flag reduction technique using the quadtree structure. From the simulation results, the proposed adaptive 3D subband coder shows about 0.29~3.14 dB gain over the H.261 and the fixed 3D subband coder techniques.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.410-417
• /
• 2012

One of the premier mechanisms used in extracting unobserved signals from observed mixtures in signal processing is employing a blind source separation (BSS) algorithm. Orthogonal frequency division multiplexing (OFDM) techniques are playing a prominent role in the sphere of multicarrier communication. A set of remedial solutions taken to mitigate deteriorative effects caused within the air interface of OFDM transmission with aid of BSS schemes is presented. Four energy functions are used in deriving the filter coefficients. Energy criterion functions to be optimized and the performance is justified. These functions together with iterative fixed point rule for receive signal are used in determining the filter coefficients. Time correlation properties of the channel are taken advantage for BSS. It is tried to remove colored noise and jamming components from themixture at the receiver. Themethod is tested in a slow fading channel with a receiver containing equal gain combining to treat the channel state information values. The importance is that, these are quite low computational complexity mechanisms.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.4
• /
• pp.400-410
• /
• 1992

This paper deals with a design of neural network control architectures for robot motion. Three types of control architectures are designed as follows : 1) a neural network control architecture which has the same characteristics as computed torque method 2) a neural network control architecture for compensating the control error on computed torque method with fixed feedback gain 3) neural network adaptive control architecture. Computer simulation of PUMA manipulator with 6 links is conducted for robot motion in order to examine the proposed neural network control architectures.