• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.199-210
• /
• 1998

The skill that utilizes atomization of the liquid has been widely used in the field of industry and engineering. Though there are dozens of methods to make atomization, the pressure type injection nozzle is frequently used in washing of parts, pastourization and painting because it has relatively simple system. This study is to reveal the characteristics of atomizing formed by three different types of the pressure type injection nozzle. We measured velocity and diameter of droplet to compare and analyze characteristic of each nozzle. In case of velocity, atomization of hollow-cone nozzle is irregular than others and change of radial direction is especially large. Atomization of flat nozzle is nearly uniform. In case of diameter, atomization of hollow-cone nozzle is increased rapidly, as measurement point become more distant from the center of nozzle. Atomization of flat nozzle has the most fixed magnitude. Accordingly, full-cone nozzle can be used irrespective of the form of subject and hollow-cone nozzle is proper to the occasion to spray large and smooth subject. Also, flat nozzle is proper to the occasion to spray a part of subject and long groove.

• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.31-36
• /
• 2011

In this paper, an analytical model of a cantilever beam having a midpoint load is considered for structural optimization and design. This involves creation of the geometry through a parametric study of all design variables. For this purpose, the optimization of the cantilever beam was elaborated in order to find the optimum geometry which minimizes its volume eventually for minimum weight by FEM (finite element method) analysis. Such geometry can be obtained by different combinations of width and height, so that the beam may have the same cross-sectional area, yet different dynamic behavior. So for optimum safe design, besides minimum volume it should have minimum vibration as well. In order to predict vibration, different dynamic analyses were performed simultaneously to identify the resonant frequencies and mode shapes belonging to the lowest three modes of vibration. Next, by introducing damping effects, the tip displacement and bending stress at the fixed end was evaluated under dynamic loads of varying frequency. Investigation of the results clearly shows that only structural analysis is not enough to predict the optimum values of dimension for safe design it must be aided by dynamic analysis as well.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1349-1355
• /
• 2009

This paper is studied on a novel power factor correction (PFC) AC-DC converter of high efficiency by soft switching technique. The input current waveform in the proposed converter is got to be a sinusoidal form composed of many a discontinuous pulse in proportion to the magnitude of a ac input voltage under the constant switching frequency. Therefore, the input power factor is nearly unity and the control method is simple. The proposed converter adding an electric isolation operates with a discontinuous current mode (DCM) of the reactor in order to obtain some merits of simpler control, such as fixed switching frequency, without synchronization control circuit used in continuous current mode (CCM). To achieve the soft switching (ZCS or ZVS) of control devices, the converter is constructed with a new loss-less snubber for a partial resonant circuit. It is that the switching losses are very low and the efficiency of the converter is high, Particularly, the stored energy in a loss-less snubber capacitor recovers into input side and increases input current from a resonant operation. The result is that the input power factor of the proposed converter is higher than that of a conventional PFC converter. This paper deals mainly with the circuit operations, theoretical, simulated and experimental results of the proposed PFC AC-DC converter in comparison with a conventional PFC AC-DC converter.

• The Korean Journal of Applied Statistics
• /
• v.27 no.4
• /
• pp.553-560
• /
• 2014

This paper deals with estimable functions of parameters of less than full rank linear model. In general, the parameters of an overspecified model are not uniquely determined by least squares solutions. It discusses how to formulate linear estimable functions as functions of parameters in the model and shows how to use projection matrices to check out whether a parameter or function of the pamameters is estimable. It also presents a method to form a basis set of estimable functions using linearly independent characteristic vectors generating the row space of the model matrix.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1352-1358
• /
• 2004

The mechanical spring is one of widely used machine elements. Among various kinds, flat-type spring loaded by a rotating pin was studied. A flat spring was simplified to a cantilever beam, and numerical analysis was attempted. Since the loading pin rotates about a separate axis from the fixed spring or vice versa, the location, direction, and magnitude of the contact force including normal contact and friction loads vary accordingly. Meanwhile, the spring is deformed substantially as the relative motion progresses. Therefore, this problem needs to be formulated taking the follower loading characteristics and geometrical non-linearity into account. Derived nonlinear differential equation was solved to yield the spring deflection, contact force and the torque to rotate the pin, and the result was compared with a finite element solution. Also, the influences of principal design parameters were studied. The proposed methodology is expected to be useful for the design of pin-loaded flat spring and the prevention of mechanical failures in the form of yielding or fatigue failure of spring or severe wear of the components.

• Journal of Internet Computing and Services
• /
• v.7 no.3
• /
• pp.13-30
• /
• 2006

In this paper, a telematics service platform, which supports the management and diagnosis of automobile and controls the automobile's convenience equipment is designed and implemented. Using the service platform, telematics software can be developed independent of the lower part of automobiles's network devices, each hardware devices, and wireless network devices. The platform classifies each device's service and provides it with the fixed form of API(Application Programming Interface). This API consists of the wireless connection for a mobile device, the CAN network for controlling an automobile, the receiving part of GPS data for location base service, and the message parser for different data formats of different network.

• Journal of Computing Science and Engineering
• /
• v.4 no.4
• /
• pp.291-312
• /
• 2010

The last decades a large amount of research has been done in the genomics domain which has and is generating terabytes, if not exabytes, of information stored globally in a very fragmented way. Different databases use different ways of storing the same data, resulting in undesired redundancy and restrained information transfer. Adding to this, keeping the existing databases consistent and data integrity maintained is mainly left to human intervention which in turn is very costly, both in time and money as well as error prone. Identifying a fixed conceptual dictionary in the form of a conceptual model thus seems crucial. This paper presents an effort to integrate the mutational data from the established genomic data source HGMD into a conceptual model driven database HGDB, thereby providing useful lessons to improve the already existing conceptual model of the human genome.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.43
• /
• pp.25-52
• /
• 2009

An acceptance is effected by a statement or other conduct of the offeree indicating assent. Silence or inactivity does not in itself amount to acceptance. An acceptance of an offer becomes effective at the moment the indication of assent reaches the offeror. It uses in stating rules on whether an acceptance is too late to form a contract and an offeree may withdraw an acceptance after transmission. The offeree may indicate assent by performing an act such as one relating to the dispatch of the goods or payment of the price without notice to the offeror. The acceptance by action also is to be performed within the time fixed between the parties or within a resonable time. However, an oral offer must be accepted immediately by an offeree. After an acceptance by action, the offeree avoid revocation of an offer by giving the offeror prompt notice to that effect. Even if a reply an offer contains additions, limitations or other modifications is a rejection of the offer and constitutes a counter offer, the reply to an offer contains additional and different terms which do not materially alter the terms of the offer constitutes an acceptance unless the offeror objects to the discrepancy or to that effect. Additional or different terms relating to the price, payment, quality & quantity of the goods, time & place of delivery, a party's liability or the settlement of disputes are considered to materially alter the terms of the offer.

• Ocean Systems Engineering
• /
• v.3 no.4
• /
• pp.327-348
• /
• 2013

An Oscillating Water Column (OWC) is a relatively practical and convenient device that converts wave energy to a usable form, which is electricity. The OWC is kept inside a fixed truncated vertical cylinder, which is a hollow structure with one open end submerged in the water and with an air turbine at the top. This research adopts potential theory and Galerkin methods to solve the fluid motion inside the OWC. Using an air-water interaction model, OWC design for energy extraction from regular wave is also explored. The hydrodynamic coefficients of the scattering and radiation potentials are solved for using the Galerkin approximation. The numerical results for the free surface elevation have been verified by a series of experiments conducted in the University of New Orleans towing tank. The effect of varying geometric parameters on the response amplitude operator (RAO) of the OWC is studied and modification of the equation for evaluating the natural frequency of the OWC is made. Using the model of air-water interaction under certain wave parameters and OWC geometric parameters, a computer program is developed to calculate the energy output from the system.

• Wind and Structures
• /
• v.13 no.2
• /
• pp.127-144
• /
• 2010

Pressure measurements on static and autorotating flat plates have been recently reported by Lin et al. (2006), Holmes, et al. (2006), and Richards, et al. (2008), amongst others. In general, the variation of the normal force with respect to the angle of attack appears to stall in the mid attack angle range with a large scale separation in the wake. To date however, no surface pressures have been measured on auto-rotating plates that are typical of a certain class of debris. This paper presents the results of an experiment to measure the aerodynamic forces on a flat plate held stationary at different angles to the flow and allowing the plate to auto-rotate. The forces were determined through the measurement of differential pressures on either side of the plate with internally mounted pressure transducers and data logging systems. Results are presented for surface pressure distributions and overall integrated forces and moments on the plates in coefficient form. Computed static force coefficients show the stall effect at the mid range angle of attack and some variation for different Reynolds numbers. Normal forces determined from autorotational experiments are higher than the static values at most pitch angles over a cycle. The resulting moment coefficient does not compare well with current analytical formulations which suggest the existence of a flow mechanism that cannot be completely described through static tests.