• Korean Journal of Environmental Agriculture
• /
• v.31 no.4
• /
• pp.344-350
• /
• 2012

BACKGROUND: To design and develop a constructed wetland for effective livestock wastewater treatment, it is necessary to understand the removal mechanisms of various types of pollutants in constructed wetlands. The objective of this study was to evaluate the treatment efficiency of pollutants under different types of fraction in constructed wetland system for treating piggery wastewater. METHODS AND RESULTS: The piggery wastewater treatment plant that consisted of activated sludge tank, aerobic and anaerobic beds was constructed. The concentration of COD(Chemical oxygen demand) in effluent by fraction was 71.5 mg/L for soluble COD, 142 mg/L insoluble COD. The concentration of SS(Suspended solid) in effluent by existing form was 102 mg/L for volatile SS, 15.5 mg/L for fixed SS. The concentration of T-N(Total nitrogen) and T-P(Total phosphorus) in effluent by existing form were 12.8 mg/L and 3.05 mg/L for dissolved form, 35.0 mg/L and 1.93 mg/L for suspended form. The removal efficiencies of COD, SS, T-N and T-P in hot season(summer and autumn) were higher than those in cold season(spring and winter). The removal efficiencies of COD, SS, T-N and T-P in effluent were 98.0, 99.0, 98.2 and 99.2% for all seasons, respectively. CONCLUSION(S): The results indicated that removal types of pollutants were insoluble COD(ICOD), volatile SS(VSS), dissolved T-N(DTN) and dissolved T-P(DTP) in constructed wetlands for treating piggery wastewater.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.4
• /
• pp.538-548
• /
• 2000

A study analyzes the eclectic trend shown in Andy Warhol look to explain the pluralistic aspect which is expressed in the late 20th century's fashion. Eclecticism is a trial to dismantle the barriers between pure art and popular art, high culture and low culture. This pursues harmonious accommodation and coexistence of all areas without being confined in the conventional lofty taste or high art. This thesis studies the characteristic aspects of the eclectic trend by classifying this trend into sell culture, mass media and fashion around the Andy Warhol look. The sexual eclectic trend in Warhol look is bisexual one shown in clubland and the world of modeling and supplies fashion with abundant expression and ambiguity. Warhol established cultural eclecticism by compounding high cultural factors and low cultural factors. broke up the boundary between street fashion and high fashion and escaped from the fixed idea on materials and design. Also he generalized and democratized specialty or nobility conventional paintings had possessed through introducing repetition and mediocrity and fully utilized every kind of mass media, Hollywood movie stars and daily necessaries in producing works. Andy Warhol who asserted‘Business Art’that was the mixed form of artistry and commercialism had creative and futuristic taste and proposed the direction to develop current fashion and art where the concept of economy is importantly brought into relief.

• Membrane Journal
• /
• v.10 no.2
• /
• pp.66-74
• /
• 2000

In consideration that a high tensile strength and ion exchange capacity are maintained as the swelling of membrane is controlled by the coagulation of PSf with the introduction of ion exchange groups and PPSS without the introduction of ion exchange groups, the block copolymer of PSf and PPSS were synthesized. The cation exchange membrane was prepared by sulfonation with CSA and casted. The synthesized block copolymer and cation exchange membrane were characterized by FT-IR and their thermal stability was confirmed by TGA. The optimum sulfonation could be accomplished at a mole ratio of BPSf to CSA 1:3. The best electrochemical properties obtained by the optimal condition were area resistance of 4.37 $\Omega$ㆍ$\textrm{cm}^2$, ion exchange capacity of 1.71 meq/g dry membrane, water content of 0.2941 g $H_2O$/g dry membrane, and fixed ion concentration of 5.81 meq/g $H_2O$. When GBL was used as an additive, area resistance was increased by 13.7 % and ion exchange capacity was increased by 14.6%. When the membrane was fabricated in a form of composite using non woven cloth as a support. the tensile strength of membrane could be improved, but the electrochemical characteristics were not influenced.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.2
• /
• pp.12-22
• /
• 2012

The aim of this study is to investigate the present use condition of 145 public open spaces which have not been executed in the Busan Metropolitan City Area. The unexcused public open spaces are analyzed by the zoning, size, shape type and the development planning. First, in terms of the distribution rate by zoning, it is found that the majority of unexecuted public open spaces are located in residential area, especially in the third general residential area. Second, the most shape types are linear forms and the next are indeterminate form and fixed types. Lastly, just a few of the unexecuted public open spaces have the development plan and those are mostly to create a small park or rest area.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.4
• /
• pp.2521-2523
• /
• 2013

Background: Papillary thyroid cancer or papillary thyroid carcinoma (PTC) is the most common thyroid cancer. The fact that it occasionally occurs in women aged 30-40 years old suggests that genetic alterations are involved its genesis. Recently, activator mutations in BRAF gene have been relatively frequently discovered. Materials and Methods: In this study, we tested 63 DNA samples from PTC patients to identify the V600E mutation frequency in the Ahvaz population. DNA was isolated from formalin fixed paraffin-embedded (FFPE) PTC tumor tissues. Genotyping was performed by PCR-RFLP and confirmed by direct DNA sequencing of a subset of PCR products. PCR-RFLP data were reported as genotype frequencies and percentages. Results: Forty nine out of 63 patients (77.8%) had a mutated heterozygote form while 14 (22.2%) showed normal genotype but none demonstrated a mutant homozygote genotype. The frequency of V600E mutation was significantly high in PTC patients. Conclusions: These findings support involvement of V600E mutations in PTC occurrence in Iran. Assessment of correlations between BRAF V600E mutations and papillary thyroid cancer progression needs to be performed.

• Journal of Korean Academy of Nursing
• /
• v.42 no.1
• /
• pp.116-124
• /
• 2012

Purpose: The study was done to compare effects of two endotracheal tube (ET tube) fixation methods (rotated fixation versus conventional) on unplanned extubation and skin integrity for orally intubated patients in intensive care units. Methods: The research design was a non-equivalent control group with repeated measures design. Participants were 80 patients; 40 participants assigned to each group. ET tube for the experimental participants fixed with rotated method every morning. Unplanned extubation was assessed by bedside nurses using the unplanned extubation report form. Oral mucosa and facial skin integrity were assessed using oral assessment guide and facial skin integrity assessment guide at day 3, 7, 10 and 14. Results: There was no difference in the unplanned extubation rate between the two groups. Oral mucosa impairment scores for the rotated fixation method were significantly lower at day 7 (p=.044), 10 (p=.048) and day 14 (p=.037). Also facial skin integrity impairment scores for the same group were significantly lower at day 7 (p=.010), 10 (p=.003), and 14 (p=.002). Conclusion: Results of the study suggest that the rotated fixation method is effective for these patients, to prevent impairment of oral mucosa and facial skin integrity. Further research is needed to prevent unplanned extubation.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.145-156
• /
• 2012

These days, the application of electronic power transformers (EPTs) is expanding in place of ordinary power transformers. These transformers can transmit power via three or four wire converters. Their dynamic performance is extremely important, due to their complex structure. In this paper, a new method is proposed for improving the dynamic performance of distribution electronic power transformers (DEPT) by using sliding mode control (SMC). Hence, to express the dynamic characteristics of a system, different factors such as the voltage unbalance, voltage sag, voltage harmonics and voltage flicker in the system primary side are considered. The four controlling aims of the improvement in dynamic performance include: 1) maintaining the input currents so that they are in sinusoidal form and in phase with the input voltages so they have a unity power factor, 2) keeping the dc-link voltage within the reference amount, 3) keeping the output voltages at a fixed amount and 4) keeping the output voltages in sinusoidal and symmetrical forms. Simulation results indicate the potential and capability of the proposed method in improving DEPT behavior.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.5
• /
• pp.398-406
• /
• 2003

In modular fixturing systems, a given part or a subassembly is fixed by placing fixture elements such as locators and clamps adequately on a plate with a lattice of holes. It is known that the minimal number of point contacts to restrict translational and rotational motions on a plane is four and the type of three locators and a clamp(3L/1C) is the minimal future. Brost and Goldberg developed the complete algorithm to automatically synthesize 3L/1C types of fixtures which satisfy the condition of form closure. Due to the nature of the fixture, the clearance between the fixture and the part is extremely small. It is hard to load the part repeatedly and accurately for human as well as for robot. However the condition of loadability has not been taken into account in the B&G algorithm. In this paper, a new method to decide a given fixture to be loadable by using configuration space is proposed. A method to plan for a part to be loaded by using compliance safely even in the presence of control and sensing uncertainty is proposed is well.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.922-925
• /
• 2004

Bluetooth technology is essentially a method for wireless connection of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments. The bluetooth system supports both point-to-point connection and point-to-multipoint connections. In point-to-multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There is one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The Bluetooth standard has been suggested that Bluetooth equipments can be used in the short-range, maximum 100 meters . It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• Journal of the Korean Chemical Society
• /
• v.13 no.2
• /
• pp.131-136
• /
• 1969

The crystal structure of rubidium hydrogen carbonate has been determined by single crystal X-ray diffraction method. the crystals are monoclinic with a = 15.05 $\AA$, b = 5.83 $\AA$, c = 4.02 $\AA$, and $\beta$ = $107^{\circ}.$ There are four chemical units per unit cell and the space-group was fixed as $C2-C^3_2$. Patterson and trial-and-error methods gave the approximate structure and its refinements were made by two-dimentional Fourier summation. The Co3 group is planar with tshhe C-O distances of 1.32 $\AA$, 1.32 $\AA$, and 1.33 $\AA$ within experimental error and the two $CO_3$ groups are linked together to form a complex anion [$H_2C_2O_6$] with the O-H${\cdot}{\cdot}{\cdot}$O distance, 2.53 $\AA.$ Two molecules of $RbHCO_3$ make the dimer structure with two hydrogen bonds. The values of reliability factor for $F_{(hol)}$, $F_{(hko)}$and $F_{(okl)}$are 0.15, 0.15 and 0.17 respectively. Each rubidium ion has eight oxygen neighbours with the Rb-O distances of 2.84~3.11 $\AA.$.