• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.151-162
• /
• 1998

During a straight driving and cornering maneuver by a vehicle various forces and moments are exerted on the tire's footprint. A cornering properties, handling and stability performances of vehicle can be predicted by these forces and moments values. Therefore, on this study, a lateral force and a aligning torque are predicted by these forces and moments values. Therefore, on this study, a lateral force and a aligning torque are predicted using a finite element method. Contact area of the tire between bead and wheel are fixed to simplify of a finite element model. Lateral force is exerted on the rigid surface as a real load with Coulum friction after inflate and load vertically. Then, rotate the tire's axle to simulate a free rolling untill taken the equilibrium of a aligning torque. Also, experimental observations are made to test a reliability of a FE analysis conducted in this study. The finite element analysis said that good agreement was obtained with experimental results of these cornering properties, giving confidence within about one percent. So it os recommended that a finite element analysis can be used as a good tool to predicted the tire cornering properties.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.5
• /
• pp.349-357
• /
• 2009

Effect of computational domain size in simulating of periodic obstacle flow has been investigated for the flow past tube banks. Reynolds number, defined by freestream velocity ($U_{\infty}$) and cylinder diameter (d), was fixed as 200, and center-to-center distance (P) as 1.5d. In-line square array and staggered square array were considered. Drag coefficient, lift coefficient and Strouhal number were calculated depending on domain size. Circular cylinders were implemented on a Cartesian grid system by using an immersed boundary method. Boundary condition is periodic in both streamwise and lateral directions. Previous studies in literature often use a square domain with a side length of P, which contains only one cylinder. However, this study reveals that the domain size is improper. Especially, RMS values of flow-induced forces are most sensitive to the domain size.

• The KIPS Transactions:PartB
• /
• v.11B no.7 s.96
• /
• pp.813-820
• /
• 2004

This paper proposes a digital image watermarking which is robust to geometric distortions using an independent component analysis(ICA) of fixed-point(FP) algorithm based on secant method. The FP algorithm of secant method is applied for better performance in a separation time and rate, and ICA is applied to reject the prior knowledges for original image, key, and watermark such as locations and size, etc. The proposed method embeds the watermark into the spatial domain of original image The proposed watermarking technique has been applied to lena, key, and two watermarks(text and Gaussian noise) respectively. The simulation results show that the proposed method has higher speed and better rate for extracting the original images than the FP algorithm of Newton method. And the proposed method has a watermarking which is robust to geometric distortions such as resizing, rotation, and cropping. Especially, the watermark of images with Gaussian noise has better extraction performance than the watermark with text since Gaussian noise has lower correlation coefficient than the text to the original and key images. The watermarking of ICA doesn't require the prior knowledge for the original images.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1441-1446
• /
• 2003

The design optimization of the plate heat exchanger with staggered pin arrays for a fixed volume is performed numerically. The flow and thermal fields are assumed to be a streamwise-periodic flow and heat transfer with constant wall temperature and they are solved by using the finite volume method. The optimization is carried out by using the sequential linear programming (SLP) method and the weighting method is used for solving the multi-objective problem. The results show that the optimal design variables for the weighting coefficient of 0.5 are as follows; S=6.497mm, P=5.496mm, $D_1=0.689mm$, and $D_2=2.396mm$. The Pareto optimal solutions are also presented.

• Coupled systems mechanics
• /
• v.7 no.4
• /
• pp.485-507
• /
• 2018

The moving load causes the occurrence of vibrations in civil engineering structures such as bridges, railway lines, bridge cranes and others. A novel engineering method for separation of the variables in the differential equation of the elastic line of Bernoulli-Euler beam has been developed. The method can be utilized in engineering structures, leading to "a beam under moving load model" with generalized boundary conditions. This method has been implemented for analytical study of the dynamic response of the metal structure of a single girder bridge crane due to the telpher movement along the bridge girder. The modeled system includes: a crane bridge girder; a telpher, moving with a constant horizontal velocity; a load, elastically fixed to the telpher. The forced vibrations with their own frequencies and with a forced frequency, due to the telpher movement, have been analyzed. The loading resulting from the telpher uniform movement along the bridge girder is cyclical, which is a prerequisite for nucleation and propagation of fatigue cracks. The concept of "dynamic coefficient" has been introduced, which is defined as a ratio of the dynamic deflection of the bridge girder due to forced vibrations, to the static one. This ratio has been compared with the known from the literature empirical dynamic coefficient, which is due to the telpher track unevenness. The introduced dynamic coefficient shows larger values and has to be taken into account for engineering calculations of the bridge crane metal structure. In order to verify the degree of approximation, the obtained results have been compared with FEM outcomes. An additional comparison has been made with the exact solution, proposed by Timoshenko, for the case of simply supported beam subjected to a moving force. The comparisons show a good agreement.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.709-713
• /
• 2009

Recently, a lot of research that applies data acquired from devices such as cameras and RFIDs to context aware services is being performed in the field on Life-Log and the sensor network. A variety of analytical techniques has been proposed to recognize various information from the raw data because video and audio data include a larger volume of information than other sensor data. However, manually watching a huge amount of media data again has been necessary to create supervised data for the update of a class or the addition of a new class because these techniques generally use supervised learning. Therefore, the problem was that applications were able to use only recognition function based on fixed supervised data in most cases. Then, we proposed a method of acquiring supervised data from a video sharing site where users give comments on any video scene because those sites are remarkably popular and, therefore, many comments are generated. In the first step of this method, words with a high utility value are extracted by filtering the comment about the video. Second, the set of feature data in the time series is calculated by applying functions, which extract various feature data, to media data. Finally, our learning system calculates the correlation coefficient by using the above-mentioned two kinds of data, and the correlation coefficient is stored in the DB of the system. Various other applications contain a recognition function that is used to generate collective intelligence based on Web comments, by applying this correlation coefficient to new media data. In addition, flexible recognition that adjusts to a new object becomes possible by regularly acquiring and learning both media data and comments from a video sharing site while reducing work by manual operation. As a result, recognition of not only the name of the seen object but also indirect information, e.g. the impression or the action toward the object, was enabled.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.5-8
• /
• 2000

This paper presents the results of an elastic buckling analysis of orthotropic plate under in-plane linearly distributed forces. The analytical solution for the orthotropic plate whose boundaries were assumed to be simply supported was derived in the previous work. In this study the loaded edges of plate are assumed to be simply supported and other two edges are assumed to be fixed. For the buckling analysis Rayleigh-Ritz method is employed. Graphical form of results for finding the elastic buckling strength of orthotropic plate under in-plane linearly distributed forces is presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1077-1082
• /
• 2005

In this paper, it is proposed that the method for constituting pressure control system controlled by Direct Drive Valve (DDV). The DDV has a pressure-feedback-loop itself. It can eliminate non-linearity and uncertainty oi hydraulic system such as uncertain discharge coefficient and change of bulk-modulus. However, the internal feedback-loop can not compensate them perfectly. And fixed gain of the DDV's internal feedback-loop is not proper to apply it through wide pressure range. The steady state error and nonlinear characteristic of transient behaviour is observed in the experiment. So another controller is needed for the desirable performance of the system. To compose the controller, the pressure control system controlled by DDV is modeled mathematically and the parameters of the model are identified using signal-compression method. Then sliding mode controller is designed based on mathematical model. Desirable performance of the pressure control system controlled by DDV is obtained.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.762-767
• /
• 2009

Some types of semi-Volatile organic compounds (SVOC) that are emitted from plastics used in building materials and household appliances have associated health risks, even at low concentrations. In this study, micro chamber method for measuring SVOC is introduced and SVOC such as di (2-ethylhexyl) phthalate and butylated hydroxyltoluene emitted a flooring material were measured using a micro chamber method. Airflow characteristics in a micro test chamber deeply depended on air exchange rate. From the evaluation using an index of air change efficiency, such as the air age and the coefficient of air change performance, a fixed air exchange rate of $1.5\;h^{-1}$ in the micro chamber is desirable.

• Communications for Statistical Applications and Methods
• /
• v.9 no.1
• /
• pp.155-166
• /
• 2002

Neural networks have been studied as a popular tool for classification and they are very flexible. Also, they are used for many applications of pattern classification and pattern recognition. This paper focuses on Bayesian approach to feed-forward neural networks with single hidden layer of units with logistic activation. In this model, we are interested in deciding the number of nodes of neural network model with p input units, one hidden layer with m hidden nodes and one output unit in Bayesian setup for fixed m. Here, we use the latent variable into the prior of the coefficient regression, and we introduce the 'sequential step' which is based on the idea of the data augmentation by Tanner and Wong(1787). The MCMC method(Gibbs sampler and Metropolish algorithm) can be used to overcome the complicated Bayesian computation. Finally, a proposed method is applied to a simulated data.