• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.46-53
• /
• 2001

To optimize the intake flow condition in the heavy-duty LPG SI engine, five different swirl ratios of intake port were investigated experimentally by oil spot method, LDV and single cylinder engine test. The flow characteristics near the piston surface were observed by oil spot method and magnitudes of swirl flow were measured quantatively by LDV method in the steady flow rig. The engine performances of various swirl flow were also tested with the heavy-duty LPG SI single cylinder engine. In the results, high swirl ratio, above $R_s$=2.3, was not suitable to develope a stable flame kernel and to produce high engine performance. Especially it was more serious under lean burn conditions, since turbulence intensity was smaller than bulk flow though those are increased together. These results were also confirmed by LDV measurement and oil spot method. On the contrary, low swirl ratio($R_s$=1.3) is not good to propagate a flame since the turbulence intensity and bulk flow are vanished during compression stroke and low swirl ratio has too weak initial energy for stable combustion. Therefore, the of optimized swirl ratio f3r the heavy-duty LPG engine in this work was found around $R_s$=2.0.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.196-201
• /
• 2013

In this paper, a dual-mode balanced filter with symmetric coupled composite right/left-handed transmission line is introduced. Unlike the other symmetric structure, this configuration has the ability to operate under both common- and differential-mode excitation. These properties are achievable through providing physical short circuit by means of ground vias at the center of each unit-cell along the symmetry plane of the structure. Because the CRLH unit-cells are operated under both common- and differential-mode excitation, we implemented a balanced filter using these properties. To validity these features, a five-cell four port coupled CRLH-TL is simulated, fabricated and measured and the obtained performances agree with the simulation results under both common- and differential-mode excitation.

• Journal of Environmental Science International
• /
• v.13 no.9
• /
• pp.767-777
• /
• 2004

This study evaluated the technical feasibility of the application of $TiO_2$ photocatalysis for the removal of volatile hydrocarbons(VHC) at low ppb concentrations commonly associated with non-occupational indoor air quality issues. A series of experiments was conducted to evaluate five parameters (relative humidity (RH), hydraulic diameter (HD), feeding type (FT) of VHC, photocatalytic oxidation (PCO) reactor material (RM), and inlet port size (IPS) of PCO reactor) for the PCO destruction efficiencies of the selected target VHC. None of the target VHC presented significant dependence on the RH, which are inconsistent with a certain previous study that reported that under conditions of low humidity and a ppm toluene inlet level, there was a drop in the PCO efficiency with decreasing humidity. However, it is noted that the four parameters (HD, RM, FT and IPS) should be considered for better VHC removal efficiencies for the application of $TiO_2$ photocatalytic technology for cleansing non-occupational indoor air. The PCO destruction of VHC at concentrations associated with non-occupational indoor air quality issues can be up to nearly 100%. The amount of CO generated during PCO were a negligible addition to the indoor CO levels. These abilities can make the PCO reactor an important tool in the effort to improve non-occupational indoor air quality.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.2
• /
• pp.29-56
• /
• 1993

The International Convention for the Prevention of Pollution from Ship, 1973, as modified by the Proto-col of 1978 relating thereto, well known as MARPOL 73/78, is probably the most important international agreement on the subject of marine pollution. The main purpose of the Convention is to reduce the total oil remaining on board vessel to minimum. MARPOL is a combination of different sets of rules on oil, chemicals, noxious substances in package forms, sewage and garbage as shown on each Annex. Since the Convention has globally set forth in 1973, it has amended so often whenever reasonable articles are requi-red by contracting states under guidelines of IMO. The amendments, for instance, have continuously perfo-rmed more than 8 times regarding articles, protocols, and five annexes because the original text was badly drafted as the control measures were expressed in general way. This paper, therefore, is intend to summa-rize a main point relating to each amendment, so that persons who have an interest in the Convention would be completely understand for practical implementation. Especially, for legislative purpose or annen-dement of domestic law, it could timely be contributable if specific consolidation and unified interpretations are followed with this paper. Consequently it is much more worth to study for preventing marine pollution from ship with tracing every moment whenever the Convention formally adopted through amending up-to-data.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.4
• /
• pp.1-8
• /
• 1995

Although ship's draught information onboard is substantial for both the safety of navigation and the estimation of loaded cargoes, its accuracy depends, in conventional surveying method, on the skillfulness of observers and the condition of the sea surface round the vessel. To obtain more accurate information accessibly, measuring instruments with sophisticated sensors such as mechanical, electronic and ultrasonic transducers have been developed. However, they have still limitation in accuracy and in making up a system due to the complexity of processing signal. In this paper, we propose a new technique for analyzing ultrasonic pulse signal, in order to improve the measurement accuracy and simplify a remote sensing system of draught by ultrasonic waves. In this technique, pulse signal is translated into phase curve which is composed of the phase value defined in time domain. Then, the time interval between two signals different in waveform, is waveform, is analytically determined by calculating average time difference on phase curves. Also, analytical procedure can be carried out in real time with the successive five data sampled at T/4, for high speed digital processing with computer and A/D converter. This technique is useful for measuring draught under the influence of sea condition and for interfacing its data briefly to the integrated bridge system.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.14-21
• /
• 2007

A passenger ship is consist of five(5) constituents; passenger, sea, crew, port and ship itself and the rule & regulation which is applicable to passenger ship are differently required as their objects of constituents. the basic concept of rule & regulation can be defined all activities to keep safety of ship and her constituents. Especially, the rule & regulation for passenger ship design and construction shall be considered not only safety of ship itself but also safety of lives, so its are required more severe than commercial vessel. Recently, the IMO have finished the rule making work on the 'passenger ship safety' since it has been discussed last 2000 and next MSC meeting will be adopted the results. In this paper, the application method of rule & regulation are treated and the new rule which were made by IMO are introduced. The rule & regulation for passenger ship is one of the most important things. therefore, it is required to careful consideration to apply on the rule application.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.23.1-23.6
• /
• 2018

Background: Velopharyngeal insufficiency that accompanies speech resonance and articulation disorders can be managed through several intervention methods such as speech-language therapy, prosthetic aids, and surgery. However, for patients with severe hypernasality, surgical interventions are highly recommended. Among available surgical techniques, the posterior pharyngeal flap is most common. Case presentation: Two adult males with high nasalance scores underwent superiorly based posterior pharyngeal flap surgery, followed by speech testing by an expert speech-language therapist. Nasalance scores and articulation accuracy were assessed up until 1 year after the surgery. Nasalance scores were measured five times using a nasometer, after which the average value was calculated. Conclusions: Consistent declines in hypernasality over time are not easy to explain since the pedicled pharyngeal flap narrowed over time, secondary to cicatrization. However, scar tethering of the soft palate in a posterior direction could reduce the velopharyngeal port size over time. Therefore, long-term follow-up with intensive speech therapy is suggested for patients with severe hypernasality.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.4
• /
• pp.269-283
• /
• 2000

Service is the source of firm's competitive advantage in recent years. The importance of service quality in any service industry doesn't need to be disputed. Customers have expected the improvement of the quality of service they receive ,so providers are struggling to meet these expectations. This study aims at finding factors of service quality in passenger transportation. An empirical investigation and the measurement on the perceived Service Quality by customers in the passenger transportation system was carried out. The purpose of this study is to clarify the factors of service quality on the basis of service marketing concept. In order to fulfill the objectives, this paper combines research tools that include both empirical study and documentary research. Data was gathered from 239 passengers by the use of questionnaire. In this study, the established hypotheses were generated on the basis of the service quality evaluation (SERVQUAL) model. Research findings through empirical test are as follows. First, five service quality dimensions in passenger transportation are identical to SERVQUAL dimensions defined by Parasuraman, Zeithaml, and Berry in 1988. Second, demographic segments such as gender and age don't have significant different dimension of service quality. Third, there is no significant difference between groups by experiences such as price level, abroad tour and vehicle type in determinants of transportation service quality.

• Journal of the Korean Institute of Navigation
• /
• v.3 no.1
• /
• pp.29-46
• /
• 1979

The climate of a given region is determined by the combination of the various climatic elements. But among them, the temperature is the most important element to classify the climatic type. The author attempted to classify the climatic types in Korea by making a analysis of the characteristics of temperature distribution. To accomplish the study, the author analyzed the daily and yearly range of temperature, the warmest and coldest months, continentality and oceanicity, thermal anomaly, and relative temperature, etc. The data of 153 weather stations are used for the analysis of the above five criteria. As a result of the study, the climate of Korea can be divided into three types, namely, the continental, coastal and intermediate(or transitional) type. The Pronounced continental type is appeared in the northern part of highland area. And the coastal type is limited to the east and south coast areas, and the southern part of the west coast area. The continentality is larger, and the oceanicity smaller, than those of Siberia, Mongolia and the inland area of China where the continental climate is most remarkable in the world. The reason why the west coast area is more continental than the east coast area may be due to the terrain effect and the warm current going north along the east coastline.

• Journal of Distribution Science
• /
• v.18 no.12
• /
• pp.45-54
• /
• 2020

Purpose: Indonesia's maritime logistics and distribution system is currently faced with several challenges, some of which include prolonged export and import time for goods handling as well as the high logistics cost. This study further analyzes the existing business processes in maritime logistics in East Java Province in order to provide solutions to the challenges. Research design, data and methodology: This research was carried out in East Java Province, Indonesia, with data collected through field observations, documentation, and in-depth interviews with all the stakeholders involved. Results: The study showed that the number of stakeholders and activities involved in the flow of goods movement ultimately impacted the length of time. These factors can be classified into the following five: 1) export and import regulations, 2) third party logistics competencies, 3) transportation infrastructure and facilities, 4) adoption of information systems and technology, and 5) maritime line connectivity. Conclusion: Analyzing the three supply chain flows in the maritime logistics and distribution industry called for the need for improvement to increase coordination among related institutions, improve the flexibility of dwelling time to the conditions of each port, enhance service levels, improve transportation infrastructure and facilities, implement information system and technology, and develop shipping routes and networks. Therefore, a collaborative supply chain management system can be realized.