• 한국의류학회지
• /
• 제25권4호
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• 한국지반신소재학회논문집
• /
• 제15권1호
• /
• pp.1-10
• /
• 2016

최근 해상풍력발전 단지 조성은 많은 양의 에너지를 창출할 수 있어 그 기대는 점차적으로 증가하고 있다. 특히 제주도는 풍황이 우수하여 해상풍력발전 시스템 운영을 위한 최적의 대상지이기는 하나, 화산활동에 의해 형성된 지형으로 육지부와 달리 현무암층 사이에 연약층인 화산쇄설물 및 공동이 불규칙하게 발달된 층상구조로 이루어져 있다. 이에 본 연구에서는 제주현무암의 p-y 곡선을 얻기 위한 수평재하시험을 실시하였다. 말뚝 수평재하시험중에 측정한 변형률 데이터로부터 p-y 곡선을 유도하기 위하여 수평변위(y)는 high order polynomial curve fitting 기법을 적용하고, 지반반력(p)은 piecewise cubic polynomial curve fitting 기법을 추천한다. 이는 지반반력을 계산하기 위하여 미분하는 과정에서 발생하는 에러를 최소화 할 수 있으므로 역해석을 통한 말뚝두부에서 하중-변위를 예측할 때 에러가 가장 작게 발생한다.

• 한국산업보건학회지
• /
• 제7권1호
• /
• pp.99-112
• /
• 1997

A quantitative fit test, condensation nuclei counting(Portacount 8025, TSI), was performed concurrently with a qualitative fit test, sodium saccharin(FT-10, 3M) to evaluate FF values and to determine the correlation between two methods. Two brands of full facepieces, T, S and two brands of half masks, T, S, were fit tested, respectively, on 103 wearers one time. The FF values obtained by CNC QNFT were lognormally distributed. The FF values for T brand of respirators were statistically very much higher than those for S brand of respirators. For a full facepiece wearer combination having a $FF{\leq}100$, as determined by CNC QNFT, the point estimate of the probability of that combination not being rejected by the saccharin QLFT was found to be 0.09 with 90% confidence that this statistic is not expected to exceed 0.25. For a half mask wearer combination having a $FF{\leq}10$, as determined by CNC QNFT, the point estimate of the probability of that combination not being rejected by the saccharin QLFT was found to be 0.10 with 90%, confidence that this statistic is not expected to exceed 0.23. The uncertainty associated with each estimate, however, is large due to the small number of study subjects with inadequately fitting respirators. This result indicates that saccharin QLFT may be more suitable for adequately fitting respirators than inadequately fitting respirators.

• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.601-618
• /
• 2024

The joint probability distribution of uncertain geomechanical parameters of geotechnical strata is a crucial aspect in constructing the reliability functional function for roof structures. However, due to the limited number of on-site exploration and test data samples, it is challenging to conduct a scientifically reliable analysis of roof geotechnical strata. This study proposes a Copula method based on small sample exploration and test data to construct the intensity characteristics of roof geotechnical strata. Firstly, the theory of multidimensional copula is systematically introduced, especially the construction of four-dimensional Gaussian copula. Secondly, data from measurements of 176 groups of geomechanical parameters of roof geotechnical strata in 31 coal mines in China are collected. The goodness of fit and simulation error of the four-dimensional Gaussian Copula constructed using the Pearson method, Kendall method, and Spearman methods are analyzed. Finally, the fitting effects of positive and negative correlation coefficients under different copula functions are discussed respectively. The results demonstrate that the established multidimensional Gaussian Copula joint distribution model can scientifically represent the uncertainty of geomechanical parameters in roof geotechnical strata. It provides an important theoretical basis for the study of reliability functional functions for roof structures. Different construction methods for multidimensional Gaussian Copula yield varying simulation effects. The Kendall method exhibits the best fit in constructing correlations of geotechnical parameters. For the bivariate Copula fitting ability of uncertain parameters in roof geotechnical strata, when the correlation is strong, Gaussian Copula demonstrates the best fit, and other Copula functions also show remarkable fitting ability in the region of fixed correlation parameters. The research results can offer valuable reference for the stability analysis of roof geotechnical engineering.

• Journal of the Korean Statistical Society
• /
• 제30권4호
• /
• pp.645-660
• /
• 2001

In this paper we propose a goodness-of-fit test statistic for testing the (null) parametric model versus the (alternative) nonparametric model. Most of existing nonparametric test statistics are based on the residuals which are obtained by regressing the data to a parametric model. Our test is based on the bootstrap estimator of the probability that the smoothing parameter estimator is infinite when fitting residuals to cubic smoothing spline. Power performance of this test is investigated and is compared with many other tests. Illustrative examples based on real data sets are given.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.441-447
• /
• 2002

KSR-III(Korea Sounding Rocket - III), which is being developed by Space Technology R&D Division of KARI(Korea Aerospace Research Institute) will be launched in late 2002. It is a three-stage, liquid propellant rocket which can reach 250 km altitude and will carry out observation of ozone layer and scientific experiments, such as microgravity experiment, and atmospheric measurement. KSR-III is believed to be an intermediate to the launch vehicle capable of carrying a satellite to its orbit. Space Test Department of KARI performed GVT(Ground Vibration Test) fer KSR-III EM at Rocket Test Building of KARI. GVT is very important for predicting the behavior of rocket in its operation, developing flight control program and performing aerodynamic analysis. This paper gives an introduction of rocket GVT configuration and information on test procedures, techniques and results of It. In this test. to simulate free-free condition, test object hung in the air laterally by 4 bungee cords specially devised. For the excitation of test object, pure random signal by two electromagnetic shakers was used and total 22 frequency response functions were achieved. Polyreference parameter estimation was performed to identify the modal parameters with MIMO(Multi-Input-Multi-Output) method. As the result of the test, low frequency mode shapes and modal parameters below 60Hz were identified

• 한국의류학회지
• /
• 제26권6호
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• Composites Research
• /
• 제27권4호
• /
• pp.135-140
• /
• 2014

발포 폴리우레탄의 변형거동을 설명하기 위해 제안된 구성방정식을 발포 폴리프로필렌에 적용하였다. 이 방정식은 7개의 매개변수를 갖고 있으며, 그중 5개의 변수는 기준 변형률속도에서 준정적 압축시험을 하여 얻은 결과를 커브 피팅하여 구하고, 나머지 두 변수는 변형률 속도를 다르게 한 준정적 압축시험으로부터 얻은 결과를 커브 피팅하여 구한다. 이렇게 구한 응력-변형률 방정식이 높은 변형률속도에서도 유효한지 알기 위해 충격시험으로부터 얻은 결과와 비교하였으며 30배와 40배로 발포된 폴리프로필렌 폼 시편에 대하여 각각 시행하였다.

• 재활복지공학회논문지
• /
• 제1권1호
• /
• pp.21-28
• /
• 2007

대부분의 보청기에서는 난청인의 청력 손실을 보상하기 위해 음성 증폭 알고리즘과 잡음 및 피드백을 제거하기 위한 알고리즘 등을 사용하고 있고, 음성의 인지율을 높이기 위해서 음성의 대비를 강조하는 알고리즘을 사용한다. 음성 대비 강조 알고리즘 사용 시 과도한 대비증폭에 의해서 포먼트(formant) 사이에서 마스킹 현상이 발생할 수 있다. 마스킹 현상을 확인하기 위해서 6가지의 주관적인 평가와 1가지의 객관적인 평가를 수행하였다. 주관적인 평가로는 순음 검사, 어음 청취 역치 검사, 낱말 분별력 검사, 순음 마스킹 검사, 포먼트 순음 마스킹 검사, 어음 마스킹 검사로 이루어져있고 객관적인 평가를 위해서 LLR(log likelihood ratio)을 도입하였다. 정상 청각 피험자와 난청 피험자의 결과로 미루어 볼 때, 난청 피험자가 마스킹이 잘 일어난다는 것을 볼 수 있었고, 어음을 이용한 마스킹 검사에서는 마스킹에 의해서 난청 피험자에서 어음에 대한 인지율이 떨어지는 결과를 볼 수 있다. 이러한 현상은 포먼트 향상에 의한 왜곡 때문이 아닌 마스킹 때문이다. 그러므로 마스킹 효과의 특성을 조사하여, 보청기 적합 시, 이러한 마스킹 특성을 고려하는 것이 필요하다.

• 자원환경지질
• /
• 제46권1호
• /
• pp.1-9
• /
• 2013

본 연구에서는 배경값 보정 및 크기보정을 포함하여 오차요인을 크게 줄이고, WILDFIRE(C)를 통해 최적화된 이론값과 실측값의 일치정도 (R%, (${\sum}$|이론값-측정값|/이론값)/$n{\times}100$)를 정량값으로 제시하고, 그 값을 최소화하는 반복과정을 통해 일라이트 폴리타입 함량을 정량하는 개선된 full-pattern-fitting법을 제안하여 일정 함량을 갖는 혼합시료를 대상으로 검증하고, 기존의 Grathoff and Moore법과 비교하였다. 개선된 full-pattern-fitting법은 대상시료 내 불순물로 인한 각 폴리타입 함량오차에도 불구하고, 기존의 full-pattern-fitting법 보다 개선된 최대 3.6% 이내의 오차를 보였다. Grathoff and Moore법과의 비교에서 대상시료 모두에서 Grathoff and Moore법 적용결과는 $2M_1$ 폴리타입의 상대함량이 고평가되어 나타났으며, 이용한 피크별 매우 큰 정량값 차이를 보이는 반면, 본 연구의 개선된 full-pattern-fitting법 적용 결과는 10% 이내의 낮은 R% 값을 갖는 폴리타입 상대함량값을 보이는 것으로 나타나, 높은 신뢰도의 정량결과를 제공할 수 있음을 확인하였다.