• Title/Summary/Keyword: fitting test

Search Result 598, Processing Time 0.027 seconds

Comparison of Stereopsis by Influence Factors in Induced Aniseikonia (유발 부등상시에서 영향인자에 따른 입체시의 비교)

  • Jung, Su A;Kim, Hyun Jung
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.18 no.4
    • /
    • pp.465-471
    • /
    • 2013
  • Purpose: This study was conducted to research effects of influence factors on stereopsis of induced aniseikonia in emmetropia. Methods: 20 college students (a mean age of $22.50{\pm}2.72$ years, 14 males, 6 females) were selected as subjects and all of them had no ocular disease or systemic disease, the refractive correction of spherical equivalent within ${\pm}0.50$ D, the corrected visual acuity of 1.0 or better and the aniseikonia values less than 1% by AWAYA. Subject's dominant eye was checked by Hole in card method and contact lenses of -7.00 ~ +7.00D were fitted to cause anisometropia in dominant eye or non-dominant eye, respectively. And then aniseikonia was induced with spectacles to correct refractive error by contact lenses. Stereopsis was measured by Random Dot Stereo Acuity Test with LEA symbols$^{(R)}$ (Vision Assessment Corporation$^{TM}$, USA). Results: Stereopsis was remarkably reduced by inducing aniseikonia, with induced aniseikonia in dominant eye, with higher diopter of wearing contact lenses to induce anisometropia, with spectacles lenses correction of minus power after fitting contact lenses with plus power and in case of men. Conclusions: It should be considered to correct anisometropia that aniseikonia could cause reduction of stereopsis.

High-Frequency Parameter Extraction of Insulating Transformer Using S-Parameter Measurement (S-파라메타를 이용한 절연 변압기의 고주파 파라메타 추출)

  • Kim, Sung-Jun;Ryu, Soo-Jung;Kim, Tae-Ho;Kim, Jong-Hyeon;Nah, Wan-Soo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.25 no.3
    • /
    • pp.259-268
    • /
    • 2014
  • In this paper, we suggest a method of extracting circuit parameters of the insulating transformer using S-parameter measurement, especially in high frequency range. At 60 Hz, conventionally, no load test and short circuit test are used to extract the circuit parameters. In this paper S-parameters measured from VNA(Vector Network Analyzer) were used to extract the transformer parameters using data fitting method (optimization). The S-parameters from the equivalent circuit using the extracted parameters showed good agreement with those from measurement. Furthermore, the transformer secondary voltages from the equivalent circuit model also coincide quite exactly to the measured secondary voltages in sinusoidal forms. Finally we assert that the proposed method to extract the parameters for the insulating transformer using S-parameter is valid especially in high frequency.

A comparative study of bite force associated with remaining bone level in anterior and premolar teeth at periodontal maintenance phase (유지관리기 치주환자의 전치 및 소구치에서 잔존 치조골량에 따른 교합력의 비교 연구)

  • Song, Gyu-Won;Yim, Sung-Bin;Chung, Chin-Hyung
    • Journal of Periodontal and Implant Science
    • /
    • v.32 no.3
    • /
    • pp.643-653
    • /
    • 2002
  • Periodontal supporting tissue goes through destruction by chronic inflammatory periodontal disease as two aspect. One is qualitive aspect such as alteration of periodontium, the other is quantitative aspect such as alveolar bone loss. According to many authors, PDL is responsible for biting force, and there are two mean. for measuring PDL's function - mobility test and biting force test. This study was conducted to compare the biting force with remaining bone level, that is, quantitative aspect of periodontium, in anterior and premolar teeth at periodontal maintenance phase. 17 patients on periodontal maintenance phase during 6 months at minimum were selected for this study. For the same condition, 4 anterior, canine, premolar teeth were tested by MPM-3000 bite-force register at the same time(a.m.l0-12), the same position, the same posture, by the same examiner. Patients of TMI), ill-fitting pros thesis, general disease, malocclusion and the teeth of TFO, absence of opposing teeth, malposition were excluded. Remaining bone level was measured on the panorama X-ray film through 5 level from 1mm below CEJ to root apex. Teeth were examined twice, and bigger one was selected. If the values showed large difference. examinatin was re-done and the mean was selected. The results were as follows ; 1. In the 4 anterior group, as the remaining bone is decreased, the average of maximal biting force is decreased. Especially, at 3/5 bone level, maximal biting force is decreased significantly(p<0.01). 2. In the canine group, as the remaining bone is decreased, the average of maximal biting force is decreased. Especially, at 2/5 bone level, maximal biting force is decreased significantly(p<0.01). 3. In the premolar group, as the remaining bone is decreased, the average of maximal biting force is decreased. Especially, at 3/5 bone level, maximal biting force is decreased significantly(p<0.05). From the results of this study, clinicians could utilize these efficiently when they have to determine the proper restorative materials, time for tooth extraction, treatment plan, prognosis.

A Study on the Purchashing Condition of Brassiere for Korean Women (우리나라 성인여성(成人女性)의 브래지어 구매실태(購買實態)에 관(關)한 연구(硏究))

  • Kim, Young-Sook;Sohn, Hee-Soon
    • Journal of Fashion Business
    • /
    • v.3 no.3
    • /
    • pp.27-37
    • /
    • 1999
  • The purpose of this study is to provide for the basic data useful to the effective production and marketing of the brassiere befitting adult women's body shapes and preferences, and thereby, help them improve their apparel life. For this purpose, 563 Korean adult women aged between 20-59 were sampled to survey their practices of purchasing the brassieres and positively identify the factors affecting the practices and thereupon, determine the correlations among them by age group. Data is processed by a computer(SAS) and analyzed by using frequency, percentage, $\chi^2$-test, ANOVA, Duncan-test. The main results of this study are as follows; 1. The adult women tend to use such mass media as TV, magazines, catalogues and DM to decide for themselves which brassiere befits them most, and to check the brand-name(78.8%) or the sizes(93.4%), but more than 90% of them purchase their brassieres without trying on them. 2. The places of purchasing on which adult women rely most for their brassiere are department stores(32.6%), agencies(26.1%) and discount or pension shops(25.4%), while more than 90% of the sample women often visit bargain sale shops. The average number of brassieres possessed by our adult women is 5.7, and an adult women buys 2.6 brassiere costing 10-30 thousand wons a year on average and consumes a brassiere for the period from 6 months to 2 years. 3. It had been disclosed that the brand favored most by adult women is Venus(56.2%), followed by Vivien (17.6%), Wacoal(6.8%), Amie(2.5%) and Body Guard(2.3%). The most influential factors for the popularity of brands are fitting condition(40.3%) and design(23.8%), which suggests that consumers appreciate functionality and aesthetics. The most important reference affecting our women's choice of brassiere is size(64.4%), followed by design and functionality. The brassiere style favored most by adult women is a wire-type 3/4 cup brassiere made of thin material with sewing lines, while the most favorite color is white. In all, it has been found through this study that adult women's practices of buying their brassieres differ by age group, which may well suggest that brassiere production need to take such age-wise practices into consideration in setting up their brassiere production and marketing strategies.

  • PDF

Estimation of Genetic Parameters of Body Weights in Hanwoo Steers(Korean Cattle), Bos Taurus Coreanae Using Random Regression Model (임의회귀모형을 이용한 한우 거세우 체중의 유전모수 추정)

  • Seo, Kang- Seok;Salces, Agapita J.;Yoon, Du- Hak;Lee, Hong- Gu;Kim, Sang- Hoon;Choi, Te- Jeong
    • Journal of Animal Science and Technology
    • /
    • v.50 no.2
    • /
    • pp.151-156
    • /
    • 2008
  • The study aimed to estimate genetic parameters of body weights in Hanwoo steers using random regression model and compare it with single trait animal model. A total of 1,372 Hanwoo steers that belonged to progeny testing program of the Hanwoo Genetic Improvement conducted at the Livestock Improvement Main Center of the National Agricultural Cooperative Federation (LIMC-NACF) in Rep. of Korea were used. Results of the random regression model fitting quadratic function revealed heritability values from 0.17 to 0.30 for the whole testing days up to 800 days. The results of the animal model showed estimated heritability values ranged from 0.24 to 0.36. Estimates of permanent environmental correlations tended to increase with increasing test in days. Unlike in the direct genetic correlation that at early stage the estimate was slightly negative it was 0.30 then increased to approach unity at later stage of test. Comparing the results between random regression model and the animal model showed not much differences and both followed similar pattern and therefore the use of random regression model for the national genetic evaluation of Hanwoo could be implemented.

The Formulation and Bioavailability of Oral Sustained Release Sulindac Delivery System (설린닥의 경구용 지속성 제제설계 및 생체이용율)

  • Rhee, Gye-Ju;Park, Sun-Hee;Whang, Sung-Joo
    • YAKHAK HOEJI
    • /
    • v.41 no.1
    • /
    • pp.60-73
    • /
    • 1997
  • In order to design a 24 hr sustained release preparation of sulindac for oral administration, fast release pellet (FR), slow release pellet (SR) and two combined formulation (1 : 1 and 1 : 2) were prepared. The pharmacokinetic effect of such preparations has been evaluated using rabbits as a suitable in vivo model, and tested in man. Dose determination was carried out using curve fitting according to RSTPJP II program. In bioavailability test using rabbit, AUCs of sulindac in a few designed formulations were similar to each other. $C_{max}$- of RF and SR were 1.8 times and 1.2 times higher, respectively, compared to that of combined formulation (FR:SR=1:1). While plasma concentration of FR and SR decreased rapidly, that of combined formulation (FR:SR 1:1) lasted at the level close to $C_{max}$ for 24 hrs. Plasma concentration of sulfide form from the combined pellet(FR:SR=1:1) lasted for 24 hrs, and its AUC value was 1.4-fold, 2.7-fold. and 1.2-fold greater than FR pellet, SR pellet and combined pellet (FR:SR 1 : 2). Thus, the combined pellet of 1:1 ratio was found to be the most effective for oral sustained release formulation. Bioavailability test in human showed that AUC of sulfide from TSRP (1 : 1) was approximately 1.5 times greater than total AUC of Immbaron$^{\circledR}$ administered twice in a day. While $T_{max}$ of sulfide from lmmbaron$^{\circledR}$ was 4.33 +/- 1.37 hr (lst administration) and 3.33 ${pm}$ 0.82 hr (2nd administration), respectively, that of sulfide from TSRP increased to 7.17 ${pm}$ 2.86 hr. Plasma concentration of sulfide from TSRP was sustained at more, than 1.0 ${\mu}g{\cdot}$hr/ml until 24 hrs after one dose administration. In addition, TSRP may decrease local adverse reaction in the stomach, since plasma concentration of sulfide from the combined pellet was low within 2hrs in the stomach. In conclusion, it is suggested that TSRP formulation may be effective for oral 24 hr sustained release formulation of sulindac dosing 300 ~ 350mg once a day.

  • PDF

The Consolidation Behavior on Soft Clay by Numerical Analysis (수치해석에 의한 연약지반의 압밀거동)

  • Kang, Yea Mook;Lee, Dal Won;Lim, Seong Hun;Yoon, Je Shik
    • Korean Journal of Agricultural Science
    • /
    • v.25 no.2
    • /
    • pp.235-246
    • /
    • 1998
  • This study was performed to find the effect of parameters of numerical analysis model. To find the parameters of numerical analysis model, triaxial test and consolidation test were conducted and the results were compared and analyzed with various methods. Preloaded ground was analyzed with Hyperbolic and Modified Cam-Clay models. Hyperbolic model analysis result was good agreement with measured lateral displacement, and Modified Cam-Clay model agreed more than Hyperbolic model with settlement. When the parameters of models were changed, change of settlement on center of embankment and of maximum lateral displacement on distance 5m from end of embankment were compared. On Hyperbolic model the parameter K has large influence on settlement and lateral displacement. On Modified Cam-Clay model the parameters ${\Gamma}$ and M have large influence on settlement and lateral displacement, respectively.

  • PDF

A Study on the Evaluation of Areal Precipitation in Korea. (한국 면적 강우량 산정에 관한 연구<월별, 계절별 및 연간우량 중심으로>)

  • 정문교;심재설
    • Water for future
    • /
    • v.14 no.4
    • /
    • pp.35-52
    • /
    • 1981
  • This study is to evaluate the areal precipitation from the basic data groups of monthly, seasonal, and annual rainfalls over all ma in stations in Korea. The evaluating pocesses are performed through the point and regional frequency analysis from the basic data. The basic data groups are divided into two periods-the first(1916-1944) and the second (1960-1979)-which are compared with each other. In the point frequecny analysis, the variable transformation method is applied to the best fitting distribution, and the normal fittings are established by using the Chisquare test method. In the regional frequency analysis, the geomorphologic factors and hydrometeorological factors are taken into consideration when dividing into five zones and Thiessen method and the Isohyetal method are applied. The results of this study are as follows: 1)The areal precipitation values of the first period are about 70-80mm less than that of the second period for the whole of Korea. Therefore, a new precipitation value of 1180mm is considered more suitable than the value of 1159mm, which has been up till now. 2)As the annual areal precipitiation values areevaluated over the five divide zones, it tis noticed that the difference between the values of the first period and the second is the largest in spring (to the extent of 5 times that in the other seasonas). Thereform it is considered that this result is necessary for the establishment of a timely insurance plan for the water resources. 3)The application of the Isohyetal method through the division of Korea into five zones is considered to be a reasonable procedure in the analysis of areal precipitation.

  • PDF

Toward Self-Directed Math Learning in College Math Classes (대학수학에서, 자기주도 수학학습)

  • Kim, Byung-Moo
    • Communications of Mathematical Education
    • /
    • v.24 no.3
    • /
    • pp.563-585
    • /
    • 2010
  • The major goals of this study are to find the factors that enhance self-directed math learning in college math classes and to provide the students with the opportunities to check and develop their self-directed math learning attitude. For these research goals, we prepared the questionnaires that asked about their learning motivations, basic learning ability, self-discipline strategies, and self-directed learning strategies. Another purpose of the questionnaires was to give them the chances to check and improve their attitude toward those learning strategies, motivation and ability. From the research results, we find that the important factors for self-directed learning are internal & external motivations, concentration ability, and the goal-setting and plan-making abilities. In addition, concentration ability, good habit, stress-control, recognition of math value, and self-directing ability are found to be necessary for the desirable learning environment. On the other hand, we find that the ability to perform note-taking, class preparation and review, time-control, and test-control is required for the selection and practice of self-fitting learning strategies. Finally, we provided our own self-directed math learning model. Our model, containing the necessary factors for self-directed math learning, is the revised and modified one of Knowles(1975)'s 5 stage self-directed learning model that comprises diagnosis of learning desire, setting learning goals, grasping human&material resources, selection and practice of proper learning strategies, and evaluation of learning results.

Actual condition on accuracy control of mammography equipment in Kyeongsangbuk-do (경상북도 유방촬영장비의 정도관리에 대한 실태조사)

  • Kim, Sang-Jin;Ji, Tae-Jeong
    • Journal of radiological science and technology
    • /
    • v.29 no.1
    • /
    • pp.29-37
    • /
    • 2006
  • The breast cancer has the highest occurrence rate among the female cancers, and as the living style changes, the occurrence is increasing gradually. For the breast cancer test among women, who comprises up to 50% of the total population, the mammography is mainly used as the screening test, and the accuracy control is the most important aspect of the testing. Therefore this research divided the northern part of Kyeongsangbuk-do into 4 regions and investigated the accordance ratio of examination field and light examination field, the total focus using the optical density and compression rate, and the overall maintenance of mammography within the regions. The equipments of 11 hospitals were investigated, and the 7 hospitals passed the standard level of the accordance ratio of examination field. 6 hospitals passed the standard optical density, and 7 hospitals had the passing performance in the compression rate. Fibers, group of specks, and masses within the Mammographic Accreditation Phantom scored 10, being within the standard range. However, only 3 hospitals were equipped with private development processor and illumination. The result reflects the fact that the image quality of breast is not correctly being maintained. Moreover, only 27.27% satisfied all the three categories of compression fitting, accordance ratio of examination field, and phantom image evaluation at the same time. The accuracy control must be maintained more precisely for the accurate diagnosis of breast cancer.

  • PDF